subcategories
(3rd category level)
Manufacturer:
(Category: 109)
indexing:Länge =< 1050 mmtable::Teilungslänge =
Used incl. extinguishing system Kraft+Bauer Auction-ID: A1-49926-34
Item number: 7100.2000.G , Serial number: VC1792 , for more details see photo of the nameplate Auction-ID: A7-49942-1117
length: 1510 mmwidth: 680 mmheight: 990 mmweight of the machine ca.: 0,55 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 16 mmstroke: / mmtable-size: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 2...20 mmthroat: 210 mmbore stroke: 100 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,165 tdimensions of the machine ca.: m- B16 mount (drill chuck taper)- max. drilling capacity: 2 ... 20 mm- distance center drill spindle to column : 210 mm- distance from spindle to table : 400 mm- max. stroke of spindle: 100 mm- adjustment of spindle stock 250 mm- table size: 340 x 280 mm- 4 speeds of drilling spindle: 355 ...2800 per minute- rated power: 1,1 kW- weight: 165 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new
Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.
CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads workpiece diameter: 100mm max. tool diameter: 180-245mm Swivelling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new This machine can be inspected under power in our warehouse in Gussago BS (Italy) Mimu Machine Tools
CNC turning center Type: Puma MX 1600 ST Manufacturer: Doosan Year: 2014 Highly productive multifunctional CNC turning-milling center designed for complete machining of parts in one clamping. Control: FANUC Series 31i Model A Max machining diameter: 330 mm Max machining length: 900 mm Main spindle: 6 chuck Speed up to 6,000 rpm Bar passage 51 mm Y-axis: ± 85 mm B-axis: ± 120° Milling spindle: Capto C5 interface Speed up to 12,000 rpm Chain magazine for milling spindle: 40 positions for Capto C5 tools Revolver: 16 tool positions Bar feeder Belt conveyor for finished parts workpieces. Tool holders Machine in good condition, fully functional. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Compressor met Abac-drogerDiesel-oil (1) -- Naphte (2) -- Electr (3): electric Max output: 11 bar voltage: 380 volt Volume flow rate: 653 liter/min Power imput: 5,5 hp / 4 kW Volume (L): 270 liter Length: 1575 mm Width: 680 mm Height: 1150 mm
x-travel: 3.500 mmy-travel: 2.600 mmz-travel: 1.000 mmControl: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mmtable weight: 15.000 Kgdistance between columns: 2.300 mmrapid travel x/y/z: 15/12.000 mm/minfeed: 5 m/minmilling head: Automatic Orthogonal UAGA milling head swivable ca.: 2,5 x 2,5 °spindle turning speed range: 3.000 U/minspindle drive: 22 kWtransmission ratio: 2 tool taper: ISO 50 Tools changer: 30 fach/toolshandwheel: HEIDENHAIN HR 410 total power requirement: kWweight of the machine ca.: 28 tdimensions of the machine ca.: m- Direct-Drive Spindle Head- Direct-Drive Spindle Speed 5,000 rpm- Automatic Retractable Support on the Right Side for Orthogonal UAGA Head - Automatic Retractable Support on the Left Side for Direct-Drive Spindle Head - Cover - Automatic Head Clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: MITSUBISHI Model No.: QA 20 Year: 2000 Condition: Used Stock number: 9498 Switch-on hours: 2845 h Operating hours: 2738 h Max. travel length of the X-axis: 500 mm Max. travel length of the Y-axis: 350 mm Max. travel length of the Z-axis: 300 mm Maximum workpiece length: 1050 mm Maximum workpiece height: 295 mm Maximum workpiece height: 800 mm Maximum table load: 1500 kg Tank dimensions: 1050 x 800 x 295 mm Machine weight: 3000 kg
Technical data: Manufacturer: Perkute Type: 80 SP VA Specification: Drum Cleaning Equipment max. load: approx. 500 kg Pump drive: 1.5 – 4.0 kW Heating capacity: 6.0 – 9.0 kW Container capacity: max. approx. 140 L Basket dimensions Basket diameter: approx. 770 mm Usable height: approx. 500 mm Loading height: approx. 880 mm Condition Condition: Used Functional: tested and fully functional
We sell an Isel EUROMOD_MP30 EC-Servo machine. The machine was used exclusively for winding patterns. The machine is in good condition.
Pot diameter : 1200 mm Filling height variable: 1.80 – 2.20 m Suitable for shaft lengths up to 400 mm
CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)
Pressure:175 tchamfer lenght:4100 mmdistance between columns:3600 mmcolumn arm:410 mmram stroke speed:180 mm/secreturn speed:135 mm/secworking speed:10 mm/secwork stroke:275 mmoil volume:200 ldayligth:550 mmtable height:900 mmtable width:90 mmtotal power requirement:15 kWweight of the machine ca.:12000 kgdimensions of the machine ca.:5100 x 2150 x 2850 mm
Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 1800mm
Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 2000mm
x-travel:1000 mmy-travel:600 mmz-travel:550 mmfixed clamping table:1200 x 600 mmspindle drive motor:9 kWspindle taper ISO:40 spindle turning speed range:10 - 5000 U/minfeed range:2 - 6000 mm/mintotal power requirement:15 kWweight of the machine ca.:6 t
turning diameter over bed:1000 mmturning diameter over slide rest:750 mmturning length:3000 mmweight of the machine ca.:12 tdimensions of the machine ca.:6x2,5x1,8 mspindle bore:110 mmturning speed range:900 U/minYear:1986 Equipment:- Coolant device- 1 static steady rest- 1 rotating steady rest- Faceplate 1.000 mm- Digital display- Rapid traverse
faceplate diameter:1400 mmswing diameter:2000 mmturning height:1500 mmmain drive:80 kWfaceplate speeds from - to:1 - 365 U/minmilling motor:37 kWram head dimension:240 x 240 mmmax. ram stroke:1250 mmtotal power requirement:133 kVAweight of the machine ca.:50 tdimensions of the machine ca.:11 x 5 x 6,4 mMachine was overhauled in 2008 by OEMNew control CNC SIEMENS 840 Dautomatic tool changer 72-pcsC-axis with driven toolsAngle-, straight tool holders with CAPTO holder Coolant deviceChipconveyour
1.000 € 
