Plasma Cutting Equipment used for sale (27)

MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model No.: SPL-PA 4501.15+S50 Machine Type: CNC Plasma Cutting Machine CNC Control: iMSNC Construction: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection extraction system: 400 volts Motor power extraction system: 7.5 kW Compressed Air Generation: Screw Compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: available Location: Waltenhofen, Germany Dismantling and loading by sellers included

Plasma cutting machine put away working Max cutting thickness 25MM Metal air cooled Auction-ID: A3-46126-17024

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact Weight: 6.9 kg Dimensions: 375X155X300 Auction-ID: A1-40898-1032

Track: 8000x4500mm Travel: 6000x2500mm Sheet-thickness: 2-40mm plasma, 150mm oxy-fuel Off-line software: Libellula Many belongings and consumables. Without exhaust-system Auction-ID: A1-40982-2

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50092-335

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094 Auction-ID: A1-50092-350

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095 Auction-ID: A1-50092-348

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093 Auction-ID: A1-50092-352

BEVEL head - 5 axes, SIDEROS table with size 4000 x 6000 mm, SIDEROS external filter ECO16CT COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-5

In good working condition, has only served for 1 project. Since then no longer in use. Auction-ID: A3-46161-17428

Digital display. Surge protection. Plasma torch. Underground cable. Reducing valve with moisture separator. Equipped with IGBT technology \"Comes without CEE plug\". Welding current 20 - 60 A Cutting capacity 1 - 20 mm Open-circuit voltage 104 V Compressed air connection min. 4 bar Connected load 7.9 kW Connection voltage 400 V Weight 16 kg Dimensions LxWxH 480 x 260 x 360 mm Condition: never used / new (5) Auction-ID: A7-50084-164

Infinitely variable speed of the drive unit. - Standard version of the wheels with a PU coating. - 230V net connection • CE certificate. • Very favourable price/performance ratio. • Standard delivery with foot pedal (start/stop). Load capacity 1000 kg Workpiece diameter 20-800 mm Connection voltage 230 V Speed 100 - 1000 mm/min Total power requirement 0.1 kW Machine weight approx. 65 kg Dimensions approx. 520x470x390 mm Auction-ID: A7-50084-139

Auction-ID: A1-49968-518

Plasma Cutter with Cart - Incl. 7m hose package - Spare nozzles Welding current 20 - 100 A Cutting capacity max. 35mm mm Open circuit voltage 250 V Compressed air connection min. 4 bar Connected load 20 KVA Connection voltage 400 V Weight 70 kg Dimensions LxWxH 1.0 x 0.6 x 0.8 mm Auction-ID: A7-50084-99

Used industrial Thermal Dynamics CutMaster 81 plasma cutting system, manufactured in 2005. The unit is configured as a mobile plasma cutting system and is supplied with plasma torch and leads, earth/ground clamp, air pressure regulator with gauge, wheeled transport frame and assorted spare consumables/accessories contained in the attached storage boxes, all as pictured. Operational condition has not been verified; offered in its current condition as pictured. Manufacturer information indicates a maximum gas pressure of 125 psi (8.6 bar), recommended operating pressure of 70 psi (4.8 bar) and cutting gas flow of approximately 400 scfh (188.7 l/min). The machine is marked for air operation only, not oxygen. Auction-ID: A7-50083-26

Serial number: 21040683Operating voltage: 380 VFrequency: 50 HzRated current: 30 Afor all other welding data see photographed nameplateReference: STS - Lot 14 Auction-ID: A7-49882-254

Technical data Manufacturer: JÄCKLE Schweiß- und Schneidtechnik GmbH Type: Plasma 70 S Factory No.: 21830410 Connection voltage: 400 V, 3 phases, 50/60 Hz Cutting current: 20–70 A Duty cycle: 60% at 70 A / 108 V; 100 % at 50 A / 100 V Max. cutting thickness: 20 mm quality cut, 25 mm separation cut Compressed air supply: 5.5 bar / 160 l/min Dimensions: 530 × 610 × 810 mm Weight: 95 kg Configuration Mobile plasma cutter with extensive cable and hose accessories. Operating instructions as well as accessories/consumables case available. Auction-ID: A1-50026-42

• Working range: 6000 × 2000 mm • Speed: 40 m/min • Accuracy: ±0.05 mm/m • Z-stroke: 100 mm • Plasma: up to ±400 A • CNC: touch screen + network • including Donaldson extraction system Auction-ID: A1-47360-97

X shaft 4000 mm Y shaft 2000 mm Z shaft 400 mm 9 mtr loading space needed, machine already dismantled Auction-ID: A1-48649-22

Equipped with new control model: Hypertherm Edge Connect TC (2022) where the servodrives + motors have also been replaced; including Modesta extraction (excluding pipes); Equipped with Truehole option Auction-ID: A1-49836-4

Auction-ID: A1-49836-31

Capacity Steel/Stainless steel/Aluminum plasma up to 25mm. Hypertherm Powermax 1100, Harris Autogenous propane 3-200mm. Cutting/nesting software CR-electronic. Cutting table is not included Auction-ID: A1-40982-145

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact Weight: 6.9 kg Dimensions: 375X155X300 Auction-ID: A1-40898-1008

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50092-334

Includes toolbox with parts; computer, plasma unit; CNC program; cutting range 4000x2000mm; with chuck; working disassembled! Auction-ID: A1-47363-9

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact Auction-ID: A1-40314-125

Plasma cutter with: Digital display. Surge protection. Plasma torch. Underground cable. Reducing valve with moisture separator. Equipped with IGBT technology Welding current 15 - 40 A Cutting capacity 1 - 16 mm Open-circuit voltage 96 V Compressed air connection min. 4 bar Connected load 3.6 kW Connection voltage 230 V Weight 9.0 kg Dimensions LxWxH 371 x 153 x 232 mm Condition: never used / new (5) Auction-ID: A7-50084-134