Die-Sinking Spark Erosion Machine Tools used for sale (28)

Die-sinking EDM machine Manufacturer: Exeron Type: 312 Year of Make: 2004 Control MF10 Travel paths X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working container: 900 x 520 mm Distance table / quill: 150 / 450 mm Max. electrode mass: 30 / 150 kg Max. workpiece weight: 800 kg Filling height work basin: 300 mm 20-fold tool changer Generator current: 60 A Power supply: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/ H approx.: 1,910 x 1,798 x 2,300 mm

With electrode changer and Hirschmann tool holder Auction-ID: A7-46939-16

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

CNC Wire EDM Machine Charmilles Robofil 310 Travel X: 400 mm Travel Y: 250 mm Travel Z: 400 mm Max. workpiece weight: 500 kg Electrical connection: 380 V Machine weight: 2500 kg Dimension length: 1800 mm Dimension width: 1600 mm Dimension height: 2230 mm Max. workpiece size: 850 × 500 × 400 mm Travel U/V: 400 / 250 mm Auction-ID: A7-47048-4

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Technical data Basic machine Layout space (sqm): 12.3 Length (m): 3,5 Width (m): 3.5 Height (m): 3.0 Total weight incl. dielectric (kg): 6500 Connected load - 45/90 A generator (kVA): approx. 6/9 Connection voltage (V): 380 Connection: RST/MP/S Fuse - 45/90 A Generator (A): 25/35 Working current according to the generator (A): 45/90 Workpiece and electrode Permissible workpiece dimensions (mm): 900 x 900 Workpiece clamping area (mm): 900 x 900 Maximum permissible table load (kg): 1000 Max. permissible Electrode weight. with pneumatic clamp (kg): 100 Max. permissible Electrode weight. directly to quill (kg): 250 Min. distance between table and electrode holder (mm): 220 Max. distance between table and electrode holder (mm): 620 Work tank Mirror height of table (mm): 450 Width - inside (mm): 900 Length - inside (mm): 900 Max. capacity (l): 415 Clamping plate Length (mm): 900 Width (mm): 90 ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Machine type: CNC Die Sinking EDM Manufacturer: Sodick Model: AM35L Control: Sodick LN / LN1 control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 600 x 400 mm Axis travel (X/Y/Z): approx. 350 / 250 / 250 mm (typical for model) Process type: Die sinking EDM Generator: Sodick generator Tank: Integrated dielectric tank Control system: Sodick LN1 control with external monitor (KME) Data input: Floppy disk (2DD) interface Cooling system: External oil temperature regulator (Kanto Seiki Oilmatic) Pump system: Integrated dielectric pumps Accessories: Oil temperature unit, dielectric system, control unit Remarks: Machine in used condition. Control boots (system loading visible). Typical signs of use and dirt/oil residues. Equipped with external oil temperature control unit and dielectric system. Own mass: approx. 3,500 kg Dimensions (LxWxH): approx. 2,000 x 1,800 x 2, ...

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps.  ...

Type: Die-Sinking EDM Machine (Spark Erosion) Brand: Sodick Model: AQ55LR Control: Sodick LN1 Controller Application: Precision die-sinking EDM for mold & tool making Equipment: - Dielectric tank with working table - Z-axis head with electrode holder - CNC control unit with screen & keyboard - Manual control pendant - Integrated dielectric filtration system - Machine enclosure / splash guards Technical Data: - Axes: X / Y / Z (CNC controlled) - Control: LN1 Condition: Used Auction-ID: A7-45993-67

Key data: 500 mm, 400 mm

Roboform 350 + Erowa Robot Compackt 44-Fold Electrode Changer This die-sinking EDM machine offers precise machining with a wide range of features. Details: Year 2006 Travels: X/Y/Z 350 x 250 x 300 mm Minimum power consumption: 5 kVA Maximum electrode weight: 25 kg Accessories: incl. Erowa zero-point clamping system on table WITHOUT electrode holder

Make: Sodick Type: CNC Die Sinking EDM Machine Model: AQ35LR Control: Sodick LN1 Controller model: LQ3 Technical data: - Axes: 3 (linear) - Working tank: Die-sinking EDM - Table size: approx. 600 x 400 mm (estimated) - Z-axis display visible on control Equipment: - Sodick LN1 CNC control with keyboard & monitor - Integrated dielectric system - Tooling system (Walker-Hagou fixture visible) - Electrode changer / tool rack - Pressure gauges and flushing system - Manual control pendant Condition: Used Auction-ID: A7-45993-52

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

Make: Sodick Type: CNC Die Sinking EDM Machine Model: AM3L Control: Sodick LN1 Technical data: - Working tank: Die sinking EDM - Table size: approx. 600 x 400 mm (estimated) - Axes: X / Y / Z - CNC control: Sodick LN1 Equipment: - Die-sinking EDM generator - Enclosed working area with safety guard - Control cabinet with monitor & keyboard - System 3R tooling interface - Oil unit (Oilmatic temperature regulator) - Dielectric filtration system Condition: Used Auction-ID: A7-45993-51

2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019

CONTROLS  CNC controls TECHNICAL SPECIFICATION  current generation (max): 3600 A  Table-size         : 660 mm  Table-size         : 540 mm  Working head: electr.clamping surf.: 375 mm  .. x: 545 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2200 mm  space requirements -front/back-: 2560 mm  total height: 2870 mmThe precision electrochemical metal machining (PECM) process is the further development of electrochemical countersinking. High-precision tools can also be machined from super alloys (Inconel, Hastelloy, etc.) and PM steels without process-related tool wear.Natural granite machine frameWorking area 800 mm x 640 mm (W x D)Machine table 660 mm x 540 mm (W x D)Maintenance-free precision work axis with direct driveFixture attachment via 6 T-slot rails (M10) in the machine tableReal-time system for process control and short-circuit detecti ...

Control PC-NC Dialog Travel X/Y/Z: 1000/1510/700 mm C-axis 30-fold electrode changer Hirschmann clamping system Bearing surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

table length: 840 mmtable width: 600 mmampere: 60-120 Atotal power requirement: 15-23 kVAweight of the machine ca.: 2,75 tdimensions of the machine ca.: 2760 x 1110 x 1840 mWith controlled C-axis and 16-position tool changer.WORKTABLETable size: 840 x 600 mmDielectric above table: 360 mmMaximum workpiece weight: 1000 kgT-slots: 4 x 10 mmDistance table to quill without chuck (max / min): 595 / 180 mmWORKHEADX - Y travel: 565 x 400 mmZ travel: 415 mmX - Y - Z resolution: 0.001 mmC-axis resolution: 0.001 deg.Rapid traverse speed: 800 mm/minMax. electrode weight without rotation: 100 kgMax. electrode weight with rotation: 15 kgDIELECTRIC SUPPLYTank volume: 400 litersPaper candle filters: 4 piecesGENERATORDimensions (height x width x depth): 1800 x 600 x 920 mmWeight: 300 kgRated current: 60 – 120 APower rating: 15 – 23 kVADimensions (height x width x depth): 2760 x 1110 x 1840 mmWeight:  ...

X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg

CONTROLS  CNC controls TECHNICAL SPECIFICATION  Case size: 860 mm  .. x: 620 mm  Adjustment of  x-axis: 350 mm  Adjustment of  y-axis: 250 mm  Erosion stroke: 350 mm  Max. dist. table-electr.clamp.surf.: 520 mmELECTRICAL SPECIFICATIONS  mains power supply: 8.3 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2700 mm  space requirements -front/back-: 1900 mm  total height: 2600 mm  total weight approx.: 3000 kgDescription- Work container can be lowered- C axis for rotation, indexing and erosion- AGIEVISION control incl. TECTRON, AGIESETUP 2D- USER SEQUENCE, SPACETRACK, AGIEPATH with GEOEDITOR- Electrode changer 28 times- Incl. EROWA pneumatic chuck

Key data: 572 mm, 400 mm, 32 A

Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m

CONTROLS  CNC controls WORKING RANGE -CUBIC-  X-axis travel: 250 mm  Y-axis travel: 160 mm  Z-axis travel: 250 mmTECHNICAL SPECIFICATION  Table-size         : 480 mm  Table-size         : 330 mm  Adjustment of  x-axis: 250 mm  Adjustment of  y-axis: 160 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm  space requirements -front/back-: 1200 mm  total height: 2500 mm  total weight approx.: 1000 kgEquipment:-Agietron Compact 1 30A/C-axis / DAI 1-P-AGIE Fuzzytron-14 color screen-Fire extinguishing system-3-compartment electrode magazine-Micro-machining variant-lots of accessories

Key data: 750 mm, 500 mm, 64 A

Inv. Num. : 5897 Type: Roboform 54P Producer: Charmilles Created: 2000 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg New Source

table length: 780 mmtable width: 500 mmampere: - AControl: Heidenhain 121 total power requirement: - kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 1564Die-sinking EDM machine HANSEN 750 Smax. workpiece weight 100 kgWorking area: 500 x 300 x 375Control: Heidenhain TNC-121 Eropuls NC-2000Table 780 x 500 mmSpace requirement approx. 2 x 1.5 mWeight approx. 3.7 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120

Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.

Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled