x-travel: 3.500 mmy-travel: 2.600 mmz-travel: 1.000 mmControl: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mmdistance between columns: 2.300 mmrapid motion - x-axis: 15.000 mm/minrapid traverse: Y,Z 12.000 m/minfeed: 5.000 m/mintool taper: ISO 50 number of spindle speeds: 5.000 U/min/rpmmilling head -swivable: UAGA 3.000 U/min 45 Gradspindle drive: 22 kWtransmission ratio: 2 table weight: 15.000 KgTools changer: 30 fach/toolshandwheel: HEIDENHAIN HR 410 air pressure: 6 bartotal power requirement: 44 kWweight of the machine ca.: 25 tdimensions of the machine ca.: m- Auto Indexing Head 2, 5º /2.5º- Automatic Support in the right side for Head UAGA- Direct Output Head.- Automatic Head Changer- Automatic tools changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 175 mmtable width: 110 mmgrinding wheel diameter: 500 mmtotal power requirement: 1 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 315 mmy-travel: 180 mmz-travel: 320 mm: 5 : 14 mm: ISO 40 DIN 2079 : 45 - 1950 U/minflute distance: 10 - 170 mm/minno. of flutes: 4 m/mindistance between table/spindle: 1,4 tdiameter of rotary table: 3 x 2,7 x 1,8 mtotal power requirement: 5,1 kW- Robust/powerful universal milling machine- HEIDENHAIN digital display- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 5500 mmy-travel: 3000 mmz-travel: 1500 mmtable-size: 3000x5000 mmtable load: 15 t/m2taper ISO: ISO50 spindle turning speed range: 10-3000 U/minengine output: 17,5 kWControl: FidiaM20 Spindle power: 22 tool magazin:: 24 Rotating speeds: 600-24000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 5.000 mmy-travel: 3.100 mmz-travel: 1.200 mmControl: HEIDENHAIN TCN 530 HSCI table surface area: 5.000 x 2.000 mmT-slots: 11 T - slots - width: 22 mmtable weight: 30.000 Kgrapid traverse X-axis: 20.000 mm/minrapid motion - y-axis: 30.000 mm/minnumber of spindle speeds: 6.000 U/min/rpmSpindle power: 32 kWtaper ISO: Kegel ISO 50 Tools changer: distance between columns: 2.800 mmInternal cooling system: 20 bartotal power requirement: kWweight of the machine ca.: 65 tdimensions of the machine ca.: 15.100x6.200x6.250 mmHead UAD II positioning 0.1º / 0. 1ºSpeed ranges 2Tool clamping HydraulicHead 2 – Vertical mandrilATC positions 302 longitudinal chip conveyors1 cross chip conveyorPortable handwheelLaser tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 5.850 mmy-travel: 1.200 mmz-travel: 2.000 mmcontrol: HEIDENHAIN TNC 430 D table-size: 6.120 x 1.000 mmtable weight: 20.000 Kginternal coolant system feed: 20 barChip coveyor: inkl. handwheel: HEIDENHAIN HR-410 Tools changer: 60 fach/toolstaper ISO: ISO 50 engine output: 30 kWworking speed: 5.000 mm/minrapid taverse: 12.000 mm/minNumber of revolutions: 20 - 3.000 rpmtotal power requirement: 41 kWweight of the machine ca.: 31 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4.300 mmy-travel: 1.200 mmz-travel: 1.500 mmcontrol: Heidenhein TNC 426 PB table-size: 6.120 X 1.000 mmtaper ISO: ISO-50 Number of revolutions: 20 - 3.000 rpmwork speed: 5.000 mm/minhandwheel: HEIDENHAIN HR-410 table weight: 20.000 KgTools changer: 40 fach/toolsrapid traverse: 12.000 mm/mintotal power requirement: kWweight of the machine ca.: 28 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 6000 mmy-travel: 3500 mmz-travel: 1500 mmControl: 840 D table load: 12 theight over floor: 6300 mmtable dimension - longitudinal: 5000 mmtable dimension - cross: 2500 mmtool change unit: 200- fach weight of tools max.: 30 kgtool taper: HSK A 100 tool diameter: 250 mmtool length - max.: 500 mmspindle speed:: 5 -6000 U / minc-axis: -10 bis 370 °b-axis: 5 bis -95 °column daylight: 3000 mmtotal power requirement: kWweight of the machine ca.: 161 tdimensions of the machine ca.: 20,5 x 11 x 6,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 10000 mmy-travel: 1500 mmz-travel: 2700 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 7.000 mmy-travel: 2.000 mmz-travel: 1.250 mmControl: Heidenhain iTNC 530 Internal cooling system: 15 barmilling head: Automatisch 0,001spindle turning speed range: 4.500 U/minspindle drive: 37 kWtaper ISO: 50 tool change unit: 60 Chip coveyor: Inkl. rapid traverse: 20/10 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-CTS 15 bars-Controlled milling head (pos. Accuracy 0,001)-60 tools-37 kw spindle motor-rapid 20/10 m min-4500 rpm-iso50-Renishaw RPM60-chip conveyor-extra milling head (spare)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4.300 mmy-travel: 1.500 mmz-travel: 1.800 mmControl: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mmT-slots: 9 T-slot - distance: 250 mmT-slot - width: 28 mmrapid traverse: 15.000 mm/minfeeds: 10.000 mm/minmilling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpmtransmission ratio: 2 spindle drive: 28 kWInternal cooling system: 20 barchip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kWweight of the machine ca.: 40.1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3.400 mmy-travel: 1.250 mmz-travel: 2.000 mmControl: TNC-430PA table-size: 4.700 X 1.200 mmV- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Gradmain drive: 37 kWChip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos.milling head: Automatic Head 45º weight of the machine ca.: 35 t- Automatic Head 45º INCLUDED- Automatic Head 45º 0.001º/0.001º- Head 45º Max. Speed 3.000 rpm- 45º Head Taper ISO-50- Twist Head Contiuous INCLUDED- Twist Head Max Speed 3.000 rpm- Twist Head Taper ISO-50- Ram with Quill - Quill Diameter 150 mm.- Quill Taper ISO-50- Pick up station AITEK for 45º and Twist Heads- Rotary Table ZEATZ Ø 1200 INCLUDED- RENISHAW MP 16+SP2/1The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
