other metal working machines used for sale (11,034)

mobile; equipped with TF 400 H feed-through device; (rejected)

Measuring range 35-60 mm

Lubrication pump Delivery pressure 12Kgf/cm² Fuel tank capacity 2l see pictures

Lapping machine manufactured in 1990. This MYLAP 700 features a power of 7.5 kW and operates at a voltage of 380 V. If you are looking to get high-quality lapping capabilities, consider the MYLAP 700 machine we have for sale. Contact us for further details.

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm

spindle diameter:150 mmx-travel:3.000 mmy-travel:2.000 mmspindle stroke:700 mmdimension of the ram:340 x 340 mmram stroke:700 mmcolumn travel:1.500 mmhigh speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/mintable surface area:2.000 x 2.500 mmmax. table load:25.000 kgrapid traverse speed:5/10 m/minfeed speeds:1 - 1.500 mm/minfaceplate speeds from - to:3,2 - 140 U/mindimensions of the machine ca.:8,4 x 6,8 x 5,9 mweight of the machine ca.:57 ttotal power requirement:100 kWFull B-axisAerostatic guidesCoolant system with IKZ

Diameter: 76.1 × 2.5mm. (1x) bundle a' 37 pieces.

4 plastic boxes with metal bases (round, square, etc.) incl. threaded rods

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kgTechnical description :6-axis industrial robot.Payload according to model.Including electrical cabinet operating panel and cable.More KUKA robots in quantities available i.e.# KUKA KR 150# KUKA KR 210# KUKA KR 240# KUKA KR 360

x-travel:1.250 mmy-travel:880 mmz-travel:800 mmspindle turning speed range:1 - 10.000 U/minhigh speed spindle taper ISO:50 table-size:1.250 x 1.000 mmmax. workpiece weight: 2.000 kgfeed speeds infinitely variable:1 - 30.000 mm/minrapid traverse speed:40 m/minweight of the machine ca.:16 tdimensions of the machine ca.:7,2 x 4,4 x 2,9 m

Product is unused in the original packaging

Best. Continuous chain conveyor approx. 1,000 mm wide, manual feed station, 1 washing station approx. 1,000 mm, 2 rinsing stations each 1,000 mm, 1 drying station approx. 1,000 mm, 1 reject station, control system, bottom drip tray, Technical data, Technical data Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Connection fuse max. 400 A depending on the laid supply cable Maximum current consumption approx. 250 A Maximum power consumption approx. 85.4 kW Washing zone Pump type Lowara SVI 1603/07S30T Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Tank capacity 1050l Pump motor power 3 kW Pump delivery 390 l/min Heating capacity 45 kW (5x9 kW) Flushing zone 1 Pump type Lowara SVI 1603/07S30T Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Tank capacity 1050l Pump motor power 3 kW Pump delivery 390 l/min Heating capacity 36 kW (4x9 kW) Flushing  ...

different makes, Diameter: 160mm, 80mm, 80mm; for more details see photos of the nameplates

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kgTechnical description :6-axis industrial robot.Payload according to model.Including electrical cabinet operating panel and cable.More KUKA robots in quantities available i.e.# KUKA KR 150# KUKA KR 210# KUKA KR 240# KUKA KR 360

turning diameter over bed:340 mmturning diameter over slide rest:190 mmturning length:700 mmspindle bore:50 mmshaving-spindle speed range:40 - 3.000 U/mindimensions of the machine ca.:2 x 1 x 1,6 mtotal power requirement:6 kWweight of the machine ca.:1,2 t

Technical data Exterior measurements: Mounting on Stage Mount:0–600 mm Pick-up in the tip block: 0–200 mm Interior measurements: With small internal measuring brackets: 10–400 mm With large internal measuring brackets: 30–370 mm With electrical contact measuring device and support arm: 1–60 mm With electrical contact measuring device and universal measuring bracket: 14–112 mm Thread measurements external thread: Flank diameter up to 200 mm Pitches 1–6 mm Thread measurements internal thread: With small internal measuring brackets from 11 mm core diameter With large internal measuring brackets from 31 mm core diameter Pitches 0.5–6 mm Measuring equipment: Abbe measuring element, measuring range 100 mm Scale value 0.2 μm Measuring force 0 / 1.5 / 2.5 N Difference measuring device with electric fine indicator Measuring range ±25 scale parts Scale values 20 / 10 / 5 / 2  ...

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Various sizes

This 4-axis SCHÜCO Profilbearbeitungscenter was manufactured in 2001. It features a travel range of 6,300 x 600 x 405 mm, continuous 180° A-axis rotation, and a high-speed capability of 24,000 rpm. Equipped with an HSK-40E tool holder and an 8+1 tool magazine, it ensures efficient machining. Consider the opportunity to buy this SCHÜCO Profilbearbeitungscenter. Contact us for more information about this machine.

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

turning diameter over bed:570 mmturning diameter over slide rest:365 mmturning length:2.000 mmfeed per revolution:0,06 - 58/ 0,03 -28 mmspindle turning speed range:11,2 - 2.240 U/minspindle bore:62 mmspindle head:8 nach DIN 55022 total power requirement:15 kWdimensions of the machine ca.:4,5 x 1,5 x 1,4 mweight of the machine ca.:4,8 t

Lapping machine manufactured in 1983. This MYLÄP 400 features a lapping plate diameter of 400 mm, suitable for precision lapping applications. If you are looking to get high-quality lapping capabilities, consider the MYLÄP 400 machine we have for sale. Contact us for further details.