Technical data: Manufacturer: HanseLifter Type: HIW1.0EU-230V-02 Year of Make: 2021 Load capacity: 0.5 t Stroke: 820 mm Lifting speed with/without load: 55 mm/s Lowering speed with/without load: 40 mm/s Engine Power supply: 230 V / 50 Hz Lifting motor: 0.75 kW Power: 200 W Dimensions and weight Loading area L/W: 1,300 x 800 mm Height lowered: 190 mm Height (mast extended): 1,010 mm Weight: 160 kg Condition Condition: Used Functional: Tested and fully functional
131 € add to watchlist
Rack cannot be disassembled size 370 x 56 x 150 cm Auction-ID: A1-46783-196
Kaltenbach Saw Column Drilling Machine Alzmetall Welding machine Kemppi Pulse welding machine
Due to stock closure I ask to sell the following: 1x NC rotary table 3x rotary jaws 1x refrigeration compressor 2x Oil mist separator 3x current constant 1x power cabinet 1x rotary cycle machine 8x rivet feeder 1x Large water pump 8x measuring feet 1x torque tester 1x car climate refill unit 1 x Double honing machine 1x paint mixer, new 1x exhaust gas suction unit 1x hydraulic tank with pump 1x coolant system The price is net. Viewing possible by appointment.
Mobile marking station Marking of metal parts - was used in Faurecia Machine checked - fine, ready for use
35.000 € add to watchlist
To participate in the auction it is necessary to pay 3500.00 euros as a deposit to guarantee the payment and fulfilment of the obligations indicated in the notice of sale, to be considered accepted and signed from the moment you place a bid on this auction. Ask the contact person matteo.tosin@surplex.com for the bank details for the transfer. Please carefully consult the documents attached to this auction announcement, as follows, as participation in the auction includes full acceptance of the terms: LG 24_2026_bando vendita.PDF notice LG 24_2026_autorizzazione GD.PDF LG 24_2026 oscurata.PDF appraisal General terms and conditions of sale. The timing for carrying out the total take-away is 30 days from the final award or in any case no later than the terms indicated in the notice of sale. For further information on participation, timing, payment methods, take-away methods and more ...
2.900 € add to watchlist
Vibratory dryers See pictures Tank outer diameter 1500 mm Container diameter/ container height 1500 / 500 mm Speed range 1500 rpm Operating voltage 380 V Drive power 18 kW Volume 300 litres Machine weight approx. 1.2 t Dimensions L x W x H 1.5 x 1.6 x 1.6 m Auction-ID: A7-48095-427
200 € add to watchlist
Special system from vehicle construction Hydraulics from Rexroth incl. tools from Lehmförder see pictures Auction-ID: A7-48095-546
500 € add to watchlist
ALBA Roll Feed Leveler RM2-9-400 ALBA Recoiler S114-3-300-2 Year of Make: 1996 System consisting of straightener, reel and control panel Max. material width: 300 mm Material thickness max.: 4.0 mm Material cross-section max.: 1200 mm² Feed speed: up to 80 m/min 9 leveling rollers 2 transport rollers Reel load capacity: 2000 daN Reel expansion mandrel Ø: 460–520 mm Reel outer diameter max.: 1500 mm Control panel and electrical components available Sale expressly as a spare parts carrier or for the production of spare parts Functionality untested Signs of wear, age-related condition Scope of delivery according to photo documentation Auction-ID: A1-47153-1056
100 € add to watchlist
Double Head Chamfering Machine/Face Processing Machine for Round Material Equipped with two opposing processing units Suitable for chamfering, deburring and face machining of rods, bolts and tubes Solid industrial design on steel frame Hitachi geared motors installed Workpiece holder and feed unit available Coolant supply installed According to the previous owner, the machine is functional before storage Current functional status unchecked Traces of use according to age and use present Loading possible for an extra charge and by prior appointment Auction-ID: A1-47153-1044
500 € add to watchlist
BEM 20-83 Double Head Chamfering Machine Double-head processing unit for round material Suitable for chamfering, deburring and face machining of shafts, bolts and round material Two opposing machining spindles available Pneumatic workpiece clamping installed Coolant supply available Protective cabin with safety glazing Tool and clamping device holder integrated Robust industrial design for series production According to the previous owner, the machine is functional before storage Current functional status unchecked Traces of use according to age and use present Loading possible for an extra charge and by prior appointment Auction-ID: A1-47153-1049
500 € add to watchlist
BEM MONOmaster 20-1 Double Head Chamfering Machine Automatic end and end machining of round material Two opposing machining spindles available Pneumatic workpiece clamping installed Digital control and positioning unit available Coolant supply integrated Full protection cab with safety glazing Suitable for chamfering, deburring and face machining of shafts, bolts and tubes Robust industrial design for series production According to the previous owner, the machine is functional before storage Current functional status unchecked Traces of use according to age and use present Loading possible for an extra charge and by prior appointment Auction-ID: A1-47153-1050
10 € add to watchlist
Van Ingen Tube Puller / Heat Exchanger Maintenance Set Mobile Van Ingen service unit for work on heat exchangers, condensers and industrial coolers. Executed in a robust mobile transport box and equipped with pressure gauge, hoses and maintenance tools. Suitable for overhaul and maintenance work on shell & tube heat exchangers. Offered in used condition with normal signs of wear. Auction-ID: A1-47348-92
10 € add to watchlist
Arctool Hydraulic Pipe Puller / Tube Puller Professional hydraulic pipe puller for removing tubes from heat exchangers, condensers and coolers. The installation is designed as a mobile mobile unit with integrated hydraulic system, pressure gauge, valve block and hydraulic pulling head. Widely used within the petrochemical industry, power plants and maintenance companies specialized in overhaul of heat exchangers. Offered in used condition with normal signs of wear. Auction-ID: A1-47348-91
10 € add to watchlist
PEMA 250 H industrial welding positioner for controlled positioning and rotation of workpieces during welding work. The machine has a motorized turntable with variable rotation speed from 0.2 to 3.0 rpm and is suitable for workpieces up to approximately 250 kg. Equipped for a maximum welding current of 400 A and therefore suitable for various professional welding processes such as MIG/MAG, TIG and submerged arc welding. Widely used within construction companies, mechanical engineering and welding workshops. Offered in used condition with normal signs of wear. Auction-ID: A1-47348-80
10 € add to watchlist
Visible features Heavy duty machine frame mounted on pallet. Electric drive motor at the rear. Hydraulic hoses and connections available. Adjustable hydraulic bending head. Solid steel bending rollers. Guide rails for profile entry. Foot switch / control unit available. Suitable for various profile shapes. Hydraulic Profile Bending Machine / Ring Roller Machine Industrial hydraulic profile bending machine suitable for bending various steel profiles, tubes, tubes, strip steel and corner lines. Equipped with a robust steel machine frame, electric drive, hydraulic bending head and heavy-duty steel bending rollers. The machine is designed for professional use within construction companies, metal processing and mechanical engineering. Offered in used condition with normal signs of wear. Auction-ID: A1-47348-71
20 € add to watchlist
Swivel arm Post height 3100mm Arm length 4200mm Auction-ID: A3-43553-17020
8.000 € add to watchlist
1 piece gas-heated chamber furnace with air circulation and hearth trolley Type: KLWg 220/180/650 Gas-heated chamber furnace for unsupervised operation, designed for three-phase three-phase current 400 volts / 50 Hz. Suitable for temperatures up to 700°C and for natural gas \"H\". Technical data External dimensions approximately: Width: 3400 mm Width with control cabinet: 3800 mm Height: 3200 mm Length with retracted hearth carriage: 8000 mm Length with extended hearth carriage: 15500 mm Interior clear dimensions approximately: Width: 2400 mm Height above beams: 1800 mm Length: 6500 mm Volume: 25.7 m³ Max. batch dimensions approximately: Width: 2000 mm Height: 1500 mm Length: 6100 mm Max. weight: 20000 kg Equipment / Execution 4 Rule groups 8 burners Total burner power: 720 kW Burner air blower: 5.5 kW Circulating motors: 4 x 22 kW Bogie hearth drive: 5.5 kW Fuel absorption capa ...
100 € add to watchlist
Containment volume: 1000 L, load capacity: 1500 kg/m2, suitable for 2 x IBC containers (1000 L each). Without content! Auction-ID: A7-47533-54
100 € add to watchlist
Containment volume: 1000 L, load capacity: 1500 kg/m2, suitable for 2 x IBC containers (1000 L each). Without content! Auction-ID: A7-47533-52
100 € add to watchlist
Containment volume: 1000 L, load capacity: 1000 kg/m2, without content Auction-ID: A7-47533-56
1.800 € add to watchlist
Control: SIEMENS S7-200 PLC with TP177B Touch Panel, operating hours: approx. 37854 hrs., connected load: 6 kW, hydraulic oil capacity: 150 L, briquette diameter: approx. 60 mm Auction-ID: A7-47533-16
250 € add to watchlist
Speed: 2,900 rpm, air output / volume flow: approx. 2,000 m³/h, external pressing: approx. 1,800 Pa, filter area: approx. 10 m² Auction-ID: A7-47533-174
250 € add to watchlist
working width 2040 mm; capacity 3 mm; foot control; Auction-ID: A1-43902-249
56.250 € add to watchlist
Base price 75,000€ Minimum bid 56.250€ Lot consisting of: 1 - Specific machinery and systems 2 - Work vehicles 3 - Equipment 4 - Moulds 5b - Warehouse (raw materials) 5c - Warehouse (semi-components) 6 - Office furniture 7 - Electronic office machines Items sold in unverified status - Recommended viewing Auction-ID: A7-47113-2
36.010 € add to watchlist
To participate in the auction it is necessary to pay 3,600.00 euros, ask the contact person andrea.bruni@surplex.com for bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-47232-3
