subcategories
(3rd category level)
Manufacturer:
(Category: 109)
2 boxes of clamping pads, in different designs ( round , square ) , with threaded hole , see photos for more details
Contents consisting of various sizes of steel plates in and with plate rack
number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW
Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W
Range of Stop Angles , of different sizes and makes, see photos for more details
Machine number: 473678Delay time: 69 msSafety distance for hand control tool: 110 mmTable dimensions: 700 x 525 mmReference: Walter - Lot 17
With 100A Split Core CT and programmable ID. Unused in box.
Equipped with input power: 7.6 kVA; input voltage 1-phase 230 V AC 50 Hz; duty cycle 45%; protection class: IP21S; Max cutting thickness: 12mm steel; Unused in box
Höfler Probe Arm with Stylus in Holder Ø Ball: 1.0 mm - Ø Mounting shaft: 6 mm , - Length of mounting shaft: 20.6 mm , - Total height: 124 mm , - Length of delivery: 84 mm , - Measuring radius: 72.5 mm , unused, scope of delivery according to photos
Coil size : 0.40 x 50.00 mm Weight : 1604 Kg complete with 4x ditto coil
Coromant Capto - CoroChuck 970 ISO: 970-C8-40-161 Product data: - Tapping range, max. - M30 - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Fastening type cutting insert - S: clamp with screw through hole - Axial runout adjustment - ER collet (DIN6499-B) for tapping -ER40 - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric exit - Coolant pressure - 80 bar - Mounting diameter - 80 mm - Holder diameter, workpiece side - 40.8 mm - Functional diameter - 40 - 55 mm - Function length - 143.7 mm - Body diameter length 1 (LB1) - 125.1 mm - Length body diameter 1 (LB2) - 155.1 mm - Speed, max. (-81, -82: Maximum speed) - 8,000 1/min - Mass (weight) - 3,448 kg per piece
Frequency 50Hz Current (a) 2.0a Air pressure 6-7barc
Fork clamp beveled, DIN 6315 B, slot width×whole length: 24x315 mm >> Technical description >> --> Slot width: 24mm --> full length: 315 mm --> for tension screws: M22; M24 --> Height: 40mm --> Width: 64mm --> Type: 6315 B --> Product Type: Clamp -> Weight: 3.80kg per piece
T-Max P Turning Cutting Head ISO: SL-PCLNR-40-16HP Product data: - Adjustment angle - 95 deg - Main cutting edge angle - 5 deg - Mounting type cutting insert - P: clamp with pin through hole Part 2 of the Tool Interface Identifier(CUTINT_MASTER) CNMG 120408 - Adapter interface machine direction - SL head (screw mounted) -size 40 - Immersion angle, max. - 0 deg - Bore diameter, min. - 56 mm - Body angle, workpiece side - 0 deg - Body angle, machine side - 0 deg - Maximum cantilever length - 42 mm - Cutting direction - R - Code for coolant supply - 1: axial concentric entry - Coolant leakage - 7: axial inclined focused exit with nozzle - Coolant pressure - 80 bar - Pick-up diameter - 40 mm - Function length - 42 mm - Functional width - 27 mm - Functional height - 0 mm - Orthogonal rake angle - -6 deg - Tilt angle - -10 deg - Torque - 5 Nm - Tool design - steel - Mass (weight) - 0.218 ...
Automated production plant for the production of carbon prepregs (1500 x 1500 mm), footprint 22,000 x 1,300 x 3,000 mm, energy supply 400 V 50 Hz max. 15 kW, compressed air 8 bar DN 8 mm, production system consisting of storage, gripping cutting unit, feed table and safety equipment, rejection belt The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be inquired by the buyer himself
Without tools and clamping devices Lot 7 - Pick-up date: 19.08 - 20.08
V-blocks with clamps, which can be used as a tool for holding cylindrical workpieces can be used for measurements or processing. The V-blocks shown are available in different sizes and are used as Set offered. Each block has a U-shaped clamp with a threaded spindle, to fix the workpiece. They are typically used in metalworking and metrology.
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672
A total of 20 dial gauges in various makes and designs and , see photos for more details
Incl. various dies WITHOUT dies Pick-up date: 10.08 - 12.08
