used Thread Rolling Machines for sale

Inv. Num. : 8649 Type: R16A-II Producer: TSUGAMI Generated: Parameters: Rolling force: 160 kN Max. diameter: 75 mm Max. length: 150 mm Weight: 2500 kg

Roll pressure infinitely adjustable from: 117 kNfeeds - fine adjustment: 0,5-45 mm/minturning speeds: 0-80 U/minSwivel angle of the roller heads: 11 °Diameter of the roller spindles: 69,85 mmStroke - Roller screw slide: 0-150 mmmin. dist. - roller screws: 138 mmmax. dist. - roller screws: 285 mmmin. diameter - Rolling tools: 230 mmmax. diameter - Rolling tools: 135 mmmin. dia.: 2 mmmax. diameter: 55 mmthread length at plunge operation: 200 mmthread length at continiuous operation: 2000 mmmaximum thread pitch: 4 mmtotal power requirement: 14 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,0 x 2,5 x 1,9 mRolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm He ...

Thread rolling machine UPW 25.1

ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, 2009 = YOM, Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes

MAX CAPASITY 63 T, DIAMETER ROLLING 110

Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

ROLL DIAMETER 70

Thread rolling machine, ESCOFIER H20Z, 2-roll, 2 moving heads (in sync), 2 - 20 Ton rolling pressure, workpiece diameter: 75mm max., tool diameter: 140-200 mm, Max plunge width 160 mm, Shafts dia: 69.95, Swivelling: +/-6°,, New: 2003, under power in our warehouse, M i M u machine tools

Inv. Num. : 7925 Type: UPW 25.1 Producer: VEB Created: 1988 Parameters: Rolling force: 25 t Cylinder width: 250 mm Shaft diameter: 80 mm Rise: 0.5-5 mm Weight: 2900 kg Equipment: Support ruler Boundary rings Set of threading cylinders Infinitely adjustable spindle speed

pressure: 20 - 300 kNadjustment of rolling slide: 50 mmdiameter of rolling spindle: 120 mmroll spindle height over machine bed: 200 mmControl: SIN 840 taper length of the roll spindle: 200 mmrolling spindle turning speeds: 0 - 50 1/mintorque per rolling spindle: 2700 Nmpower capacity: 2 x 8,4 kWdistance between rolling spindles: min. 271 / max. 368 mmrolling tool outer diameter: max. 300 mmtotal power requirement: 26 kWweight of the machine ca.: 7,1 tdimensions of the machine ca.: 9,70 x 4,50 x 3,80 mCNC machine for gear cold rollingPromot loader cellComplete housingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX CAPASITY 20 T

Thread rolling machine ORT RP18 B 2-roll, overhauled, LOW PRICE The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.

pressure: 0,2-40 tmax. workpiece diameter: 70 mmthreading length: 120 mmControl: total power requirement: 29 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Thread rolling machine ORT RP30U, 2-roll, 30 ton, swiveling heads, variable speed drive, #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2

ORT RP18B overhauled

CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)

Laminating pressure: 70 Kn, Ø Pieces: 2mm min; 30mm max, Passed: 3mm max, Grooving step: 1.75mm max, Roller width: 50mm max, Ø roller: 73mm min; 110mm max, Speed of roller shafts: 90 rpm, Ø roller bearing shaft: 40mm standard, Wheelbase: 80mm min; 135mm max, Work career: 5 min max, Advance: from 0.5mm/s to 3mm/s, main engine: 3 Kw, Electrical power consumed: 3.18 Kw, Tank capacity: 80 L, Weight approx.: 670 Kg

Laminating pressure: 70 Kn, Ø Pieces: 2mm min; 30mm max, Passed: 3mm max, Grooving step: 1.75mm max, Roller width: 50mm max, Ø roller: 73mm min; 110mm max, Speed of roller shafts: 90 rpm, Ø roller bearing shaft: 40mm standard, Wheelbase: 80mm min; 135mm max, Work career: 5 min max, Advance: from 0.5mm/s to 3mm/s, main engine: 3 Kw, Electrical power consumed: 3.18 Kw, Tank capacity: 80 L, Weight approx.: 670 Kg

Laminating pressure: 100 kN, Ø Pieces: 2mm min; 40mm max, Passed: 3.5mm max, Grooving step: 1.75mm max, Roller width: 70mm, Ø roller: 80mm min; 120mm max, Speed of roller shafts: 32 51 95 150 rpm, Ø roller bearing shaft: 40 standard, Wheelbase: 80mm min; 165mm max, Work career: 7 min, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, main engine: 3 Kw, Electrical power consumed: 4.68 Kw, Tank capacity: 80 L, Weight approx.: 750 Kg

Laminating pressure: 220 kN, Ø Pieces: 3mm min; 70mm max, Passed: 6mm max, Grooving step: 2.25mm max, Roller width: 160mm max, Ø roller: 133mm min; 170mm max, Speed of roller shafts: 24 30 38 45 62 72 90 114 rpm, Ø roller bearing shaft: 54mm standard; 69.85 special, Wheelbase: 135mm min; 230mm max, Work career: 15min max, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, main engine: 5.5 Kw, Electrical power consumed: 8.6 Kw, Tank capacity: 130 L, Weight approx.: 2100 Kg

Laminating pressure: 220 kN, Ø Pieces: 3mm min; 70mm max, Passed: 6mm max, Grooving step: 2.25mm max, Roller width: 160mm max, Ø roller: 133mm min; 170mm max, Speed of roller shafts: 24 30 38 45 62 72 90 114 rpm, Ø roller bearing shaft: 54mm standard; 69.85 special, Wheelbase: 135mm min; 230mm max, Work career: 15min max, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, main engine: 5.5 Kw, Electrical power consumed: 8.6 Kw, Tank capacity: 130 L, Weight approx.: 2100 Kg

Laminating pressure: 160 kN, Ø Pieces: 3mm min; 50mm max, Passed: 5.5mm max, Grooving step: 2mm max, Roller width: 100mm max, Ø roller: 133mm min; 165mm max, Speed of roller shafts: 32 40 51 59 81 95 118 150 rpm, Ø roller bearing shaft: 54mm standard; 69.85mm special, Wheelbase: 135mm min; 205mm max, Work career: 15min max, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, Inclination of roller-carrying axes: +/- 5º, main engine: 5.5 Kw, Electrical power consumed: 7 Kw, Tank capacity: 130 L, Weight approx.: 1700 Kg

pressure: 10 - 200 kNmax. workpiece diameter: 4 - 50 mmControl: Siemens C7 roll diameter: 5 - 105 mmpressure: 0-200 kNfeed stepless: 0-50 mm/sspindle diameter: 69,85 mmspindle distance: 125 - 255 mmspindle stroke: 130 mmroll diameter -toolpieces: 130 - 200 mmroll spindle turning speed range: 3000 - 5000 U/mintotal power requirement: 16 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 0 mEquipped with:- Control Siemens Simatic C7- Hydraulic UnitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.