subcategories
(3rd category level)
Manufacturer:
(Category: 103)
- Y Travel with head 180 = 3700- Y from floorplate to spindle middle = 4200 mm- Chain ATC Tool changer 80 positions- Rotary table 1500 x 1500 with V-Axis 1500 mm- Table load 15.000 Kg- Optional Box table 3500 x 1000 x 1000 mm- Under power - Spindle hours 9300 H
A self-built CNC milling machine by Klein GmbH is available. Travel X/Y/Z: 980mm/415mm/90mm, machine dimensions X/Y/Z: approx. 2200mm/1550mm/3000mm. An on-site inspection is possible.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With path control MILL PLUS iT Year of Make: 2006 Travel: X 800 Y 800 Z800 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar Conveyor Rotoclear Tool Measurement BLUM Laser 3 D Probe Heidenhain TS 641 Operating mode 3 + 4 Electronic handwheel 3-Piece Height Adjustable Machine Shoes Transport device Operating instructions
- Head Pick up Station- CNC Indexing Micro Head 0.001 Gr- Spindle extionsion- Internal coolant system- ATC Chain Tool changer 60 Positions- Under power
x-travel: 4000 mmy-travel: 1350 mmz-travel: (Vert.) 1600 mmControl: Heidenhain iTNC 530 table surface area: 4200 x 1150 mmtable load: 13 ttool taper: ISO 50 spindle turning speed - stepless: 0 - 3000 U/mintransmission ratio: 2 spindle motor: 28/38 kWfeed range: 5000 mm/minrapid traverse: (X/Y) 12 m/minrapid traverse: (Z) 10 m/minweight of the machine ca.: 37 tdimensions of the machine ca.: 12,9 x 6,53 x 3,79 mJanuary 2025: The milling head was overhauled (new bevel gears and bearings). Costs 38.000,- Euro.Working hours (dated 31. July 2025):Machine on: 38.483 hAuto cycle: 12.798 hSpindle hours: 11.645 h CNC-control HEIDENHAIN iTNC 530 Electronic handwheel 50-position tool changer Controlled universal milling head, indexable 2.5 / 2.5 deg. Coolant device Cooling through the spindle 2 chip conveyors Oil cooler Measuring probe Machine documentationThe data for this ad was created with Modul ...
x-travel: 400 mmy-travel: 320 mmz-travel: 450 mmControl: Haidenhain TNC 124 drive of main spindle: 3 kWnumber of spindle speeds: 63-3150 u/mintool taper: SK 40 stroke of quill vertical: 60 mmfeed speeds: 5-2000 mm/minrapid traverse: 2 m/minwork table:: 800x320 mmcoolant: 20 l/mintotal power requirement: 5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 2,2x2,4x1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Factory no. 021172, table dimensions 6000x2200 mm, feed x 6000 mm, feed y 2200 mm, feed z 1000 mm, spindle speed 0-6000/min, tool magazine 40 pcs, tool weight 25 kg, power 65 kW, weight 47570 kg, Results from the geometric measurements of this machine.
x-travel: 10000 mmy-travel: 3000 mmz-travel: 1500 mmControl: Heidenhain TNC 430CA milling head -swivable: 360.000 posspindle turning speed range: 10 - 3000 U/minTools changer: 40 pos.feed: 5000 mm/minRapid Travel X / Y / Z-Achse: 10 / 15 / 15 m/minspindle motor: 37 kWtotal power requirement: 80 kVAweight of the machine ca.: 40 tdimensions of the machine ca.: mTraveling column milling and boring machine- Control Heidenhain TNC 430CA & HR 410- autom. Tool changer with 40 places (SK 50)- Huron Universal milling head, automatic Positioning (A-/B-Axis each 0,001°) - Chip conveyor- OPTIONAL: Rotary Table 3000x3000mm - 30t (W-Axes: 2000mm), with independentFAGOR CNC ControlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical Specifications - Bridgeport Series I Table Size / Work Surface 9" × 49" (≈ 299 mm × 1245 mm) T-slots 3 pieces, spacing 2.5" (≈ 64 mm), groove width 0.625" (≈ 16 mm) Travel X (Transverse) without Power Feed: 36" (≈ 914 mm) with power feed: 33" (≈ 838 mm) Travel Y (Transverse to Feed) 12" (≈ 306 mm) Quill Stroke (Drilling Spindle Stroke) 5" (≈ 127 mm) Knee Lift (Z-Axis of Table) 16" (≈ 406 mm) Ram Adjustment (Head Stem on Ram Slide) 12" (≈ 306 mm) Min. / Max. distance spindle axis to table nose (spindle/table nose distance) min: 2.5" (≈ 64 mm) Max: 18.25" (≈ 463 mm) Min. / Max. distance spindle to column front (minimum/maximum internal width) min: 6.75" (≈ 171 mm) max: 18.75" (≈ 476 mm) Spindle / Quill Spindle Diameter: 1.875" (≈ 48 mm) Quill Diameter: 3.375" (≈ 86 mm) Spindle holder (standard): R-8 Spindle motor / power 30 minute ...
CNC Floor Milling Machine for Bed CNC control Heidenhain iTNC 530 Controlled NC table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Travel X-axis 8000 mm Y-axis travel 2100 mm Travel Z-axis 1300 mm Travel W-axis 1000 mm C-axis swivel of the milling head body by 360° A-axis swivel of the milling head by 180° Spindle speed 36 - 6,000 rpm Spindle motor 42 / 30 kW Spindle holder DIN 69871-SK 50 Tools in Tool Magazine 48 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmtable-size: 205 x 800 mmT-slots: 4 x 45 14 H7speeds: 50 - 3150 U/mintool taper: 40 ISOquill stroke: 50,0 mmFeeds X + Z Axis: 5.0 - 1000 mm/minFeeds Y Axis: 5.0 - 670 mm/minrapid traverse: 2.4 / 1.6 m/mincontrol: Heidenhain total power requirement: 5.1 kWweight: 950 kgrange L-W-H: 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition ()Equipment:- MAHO universal tool milling/drilling machine- HEIDENHAIN TNC 135 positioning/path control 3-axis manual data input control Programmable by the machine operator Convenient and easy operation- Electric motor-driven feed rates in all axes (X/Z/Y) X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min- Tiltable milling head to both sides- Tiltable T-slot universal table- Vertical clamping range- Continuously ...
x-travel: 315 mmy-travel: 180 mmz-travel: 320 mmtaper in main spindle: ISO 40 table surface area: 600 x 250 mmT-slots: 5 Stk.turning speeds: 45.0 - 1950 U/minfeed stepless: 10 - 170 mm/minvoltage: 400 Vtotal power requirement: 5.1 kWweight of the machine ca.: 1300 kgrange L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained ()Features:- Robust electric motor universal milling machine- HEIDENHAIN 3-axis digital display- Rotatable universal milling head (right/left = 90°)- Manual milling spindle feed, with lock- Stable T-slot clamping table- Axis feed with rapid traverse in X+Z+Y axis Rapid traverse continuously adjustable - Swiveling machine light- Control cabinet, installed on the left- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 315 mmy-travel: 180 mmz-travel: 320 mmtaper in main spindle: ISO 40 table surface area: 600 x 250 mmT-slots: 5 Stk.turning speeds: 45.0 - 1950 U/minfeed stepless: 10 - 170 mm/minvoltage: 400 Vtotal power requirement: 5.1 kWweight of the machine ca.: 1300 kgrange L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained ()Features:- Robust electric motor universal milling machine- HEIDENHAIN 3-axis digital display- Rotatable universal milling head (right/left = 90°)- Manual milling spindle feed, with lock- Stable T-slot clamping table- Axis feed with rapid traverse in Y-axis Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis- Control cabinet, installed on the left- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtable-size: 700 x 280 mmcontrol: Heidenhain TNC 145tool adaptor: SK40 turning speed range: 40- 2.000 U/minrapid speed: 1,5 m/minfeed speeds: 1500 mm/minpower requirement: 2.2 kWquill stroke: 63 mmweight: 1,3 ttotal power requirement: 2,2 kWweight of the machine ca.: 1,5 tdimensions: 1,4 x 2,1 x 2,0 mFeatures:- New TFT screen- Coolant system- Hydraulic tool clamping- Milling head with spindle sleeve- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper HSK-A 63Toolchanger with set up station for tool loadingNumber of tools 30Clamping System HSK-A 63IoTconnectorIoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)NETserviceNETservice Qualified support by Internet-based remote diagnosticsMessenger V4Messenger V4 Clear presentation of the machine live status.Service AgentService Agent Overview ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range- 5000 rpmDrive power (40% DC)32 kWMax. torque (40% DC)360 NmC-Axis Speed-5000 rpmTorque of C-Axis (holding torque)2 ...
Specifications Working range 250 × 700 mm Copying table size 430 × 600 mm Stroke / working area longitudinal (X) approx. 322 mm Stroke / working area transverse (Y) approx. 200 mm Spindle drive / power approx. 1.5 / 1.7 kW Spindle speed (spindle speed) approx. 80 – 20,000 rpm Copy scale ratio (enlargement / reduction) 1:1 to 1:4 Overall dimensions (approx.) 2,000 × 2,000 × 2,000 mm Weight approx. 1,650 kg
Inv. Num. : 8715 Type:- Producer: VOLTER Created: 2022 Parameters: Work table length: 2200 mm Work table width: 1610 mm Spindle drive power: 7.5 kW Maximum vertical spindle speed: 24000 1/min Lifting height: 160-180 mm Machine length: 3300 mm Machine width: 2100 mm Machine weight: 1200 kg Equipment: 4-zone vacuum table T-slot clamping system Spindle air cooling Semi-automatic tool clamping Laser starting point indication Wireless remote control CAN SW ISO 30 Terminals T12 Terminal Set Workpiece Probe
x-travel: 870 mmy-travel: 370 mmz-travel: 400 mmtable-size: 310 x 1370 mmdistance vertical spindle / table: 50 - 450 mmfeed - longitudinal/cross: 20 - 800 mm/min: 9 - 355 mm/minrapid traverse longitudinal and cross: 3000 / 1375 mm/minspindle taper: SK 50 spindle turning speed range: 40 - 1750 U/minspindle speed:: 12 Stücktotal power requirement: 5,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,9 x 2,0 x 1,5 m- Powerful CNC universal milling machine- Includes Fanuc control system- Kneading milling head- Automatic feeds on X/Z/Y axes- Central lubrication system- Coolant system- Pivoting machine light- Splash guard tray- Separate transformerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Milling center with 8 tool changer. Functional areas are still being built. Comes from research facility and is relatively little used.
x-travel: 550 mmy-travel: 400 mmz-travel: 400 mmControl: INGERSOLL ANDRONIC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAGNUM YAMA SEIKI BT-1300 CNC bed milling machine was built in 2007 in Taiwan by Magnum Machinery CO., Ltd. The machine, distinguished by its very rigid design and good kinematics, is an excellent choice for precision machining of heavy workpieces. The machining process is performed inside an enclosed workspace, which includes among others a large work table with a length of 1300 mm and a reliable spindle. Feed in the X and Y axes is performed by the work table, while in the Z axis it is performed by the spindle, which moves along precise vertical guides. All this is complemented by the installed MITSUBISHI CNC control, thanks to which the offered YAMA SEIKI BT-1300 CNC bed mill is extremely easy to operate. Technical specifications of the MAGNUM YAMA SEIKI BT-1300 milling machine - CNC controller: MITSUBISHI MELDAS 60S - work table length: 1300 mm - T-slot number: 5 - power: 22 k ...
DUGARD EAGLE 850 VMC CNC vertical machining center was built in 2007 in Taiwan by C Dugard Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. All machining processes, i.e. milling, drilling and threading, are performed fully automatically by a reliable high-speed spindle. A large, 24-position magazine selects the shortest possible access path to the cutting tool, thus significantly reducing production cycle times. All this is complemented by an advanced CNC control with many useful functions, which minimises the need for the operator to operate the machine. The EAGLE 850 VMC CNC machining center weighs 5500 kg. Technical specifications of the DUGARD EAGLE 850 VMC CNC milling machine - CNC controller: FANUC 0i-MC - feed in the X/Y/Z axis: 850/520/510 mm - rapid traverse in the X/Y/Z axis: ...
x-travel: 800 mmy-travel: 300 mmz-travel: 350 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 222 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 6500/13150 mmy-travel: 4000 mmz-travel: 1250 mmw-travel: 2250 mmcontrol: Sinumerik 840 D table surface area: 5500/12150 x 3000 mmdistance between columns: 3500 mmmax. distance between table and spindle-nose: 3000 mmmax. workpiece weight: 70000 / 105000 kgram head dimension: 480 x 510 mmspindle turning speed - stepless: 6,3 - 4000 U/minmilling spindle motor: 63 kWmax. torque on the spindle: 3300 Nmtool taper: DIN 39871 AD ISO 50 feed speeds: X/Y/Z= 24000 mm/mintotal power requirement: 120 kVAweight of the machine ca.: 245 tdimensions of the machine ca.: 29 x 7,7 x 8,1 mThe Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro!Equipment/accessories:- automatic tool magazine for 153 tools- automatic milling head magazine for 6 milling heads- machining modules/ milling heads: 1. machining module -straight - straight long - ...
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg
Key data: 1400 mm, 440 mm, 450 mm
Year of manufacture: 1978/ GÜ: 2007 Table dimensions ... 2000x425mm Axis X ... 1400mm Axis Y ... 440mm Axis Z ... 450mm Main engine power ... 11kW Machine weight ... 5170kg L x W x H ... 3920x2520mm The machine is in good condition, possible to test under power.
- Double guideway two box way construction- Head changer for Multi-Face machining off larger compontents- ATC tool changer for Horizontal and vertical milling head swivabel- Distance table spindle nose 213 - 1093 mm- Distance table spindle center 130 - ...mm- Indexing Horizontal head 5 Degrees x 72 positions- HeidenHain iTNC530 with HR410 handwheel- Spindle torq 1018 Nm ISO50 - Universal Huron type milling head
KIMLA BPF 2131 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large work table by means of a powerful, high-speed spindle. The offer also includes a set of tool holders. The KIMLA CNC milling machine weighs 3100 kg. Technical data of the KIMLA BPF 2131 milling machine - machined materials: mild metals, wood, wood-based materials, plastics, etc. - CNC controller - work table dimensions (L x W): 3100 x 2100 mm - air pressure: 8 bar - power: 14 kW - power supply: 400 V; 50 Hz - weight of the BPF 2131 machine: 3100 kg
