subcategories
(3rd category level)
Manufacturer:
(Category: 103)
This 3-axis RECKERMANN VMC 850 was manufactured in 1999. It features an internal coolant supply and is equipped with a Heidenhain TNC 430 control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the RECKERMANN VMC 850 vertical machining centre we have for sale. Contact us for further details.
This 3-axis Hurco VM20i was manufactured in 2014. It features an X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 400 mm. The machine includes a table size of 1,170 x 507 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VM20i vertical machining centre we have for sale. Contact us for further details.
This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details.
This 5-axis SPINNER U5-1530 was manufactured in 2021. It features an impressive X-axis travel of 1530 mm, Y-axis travel of 530 mm, and Z-axis travel of 465 mm. The machine includes a fixed rigid table combined with a 2-axis rotary/tilt table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-1530 vertical machining centre we have for sale. Contact us for further details.
This 3-axis Hurco VMX24 vertical machining centre was manufactured in 2004. It features an impressive X-axis travel of 610 mm and Y-axis travel of 508 mm, with a maximum spindle speed of 10,000 RPM. The machine includes advanced control options such as synchronous tapping and advanced velocity control. If you are looking to get high-quality machining capabilities, consider the Hurco VMX24 vertical machining centre we have for sale. Contact us for further details.
This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details.
x-travel: 3.500 mmy-travel: Quer 1.300 mmz-travel: Senkr. 1.600 mmtable-size: 3.800 x 1.200 mmT-slots: 7 x 22 H12 T-slot - distance: 140 mmMain drive: ED, 43 kWspeeds: 20 - 4.000 U/minTorque: 900 Nmtool taper: ISO 50 DIN 69871 feeds: 16.000 mm/minrapid traverse feeds: 35.000 mm/minControl: HEIDENHAIN TNC 640 handwheel: HR 510 milling head -swivable: 2,5 x 2,5 GradMain drive: 43 kWInternal cooling system: 5/20 barchip conveyor: Scharnierband Inkl.: 40 fachMachine on: 11.584 Spindle hours: 4.222 htotal power requirement: kWweight of the machine ca.: ca. 24 t tdimensions of the machine ca.: mSORALUCE TR 35 – HEIDENHAIN TNC 640Like-New Condition – Only 4,222 Spindle HoursHigh-quality CNC bed milling and boring center featuring extensive equipment and the latest HEIDENHAIN TNC 640 control system.Technical SpecificationsTravels: X 3,500 / Y 1,300 / Z 1,600 mmTable Size: 3,860 × 1,200 mm ...
WIEPOFAMA ZFB-50 gear hobbing machine was manufactured in 1970 in Poland by Wielkopolska Fabryka Urządzeń Mechanicznych-Poznań. The machine is used for the precision hobbing of spur and helical gears. Machining is performed by means of the hobbing method, in which the teeth are gradually formed around the entire circumference of the workpiece. The use of this method ensures high dimensional accuracy and repeatability of the produced parts. The ZFB 50 gear hobbing machine enables the machining of gears with a maximum module of 10 mm and a diameter of 700 mm. The set of interchangeable wheels included in the offer enables flexible adjustment of working parameters to a specific type of tooth profile. All this is complemented by a robust design that ensures high stability even during the most demanding challenges. All of this makes the WIEPOFAMA ZFB 50 gear hobbing machine the best cho ...
This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Two Chiron units in combination with two x Fanuc M - 20iA (2011)
This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine.
This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information.
This 5-Axis QUASER MV204-CU/12 vertical machining center was manufactured in 2007. It boasts X, Y, and Z-axis travels of 700 mm, 660 mm, and 480 mm respectively, with a table diameter of 500 mm and a 32-position tool magazine. The machine features a SK 40 spindle taper, coolant inside the spindle, and rapid traverse rates of 30 meters/min. Ideal for intricate milling tasks, the QUASER MV204-CU/12 machine we have for sale ensures high precision and efficiency. Contact us for further details.
This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information.
This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details.
This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details.
This 3-axis CHIRON DZ 18 W MAGNUM was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 630 mm. The machine includes a table size of 1250 × 850 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ 18 W MAGNUM vertical machining centre we have for sale. Contact us for further details.
This 4-axis Avia VMC 1000 was manufactured in 2017. It features a generous X-axis travel of 1000 mm, Y-axis travel of 540 mm, and Z-axis travel of 620 mm. The machine is equipped with a robust table size of 1200 x 540 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Avia VMC 1000 vertical machining centre we have for sale. Contact us for further details.
x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmtable surface area: 600 x 200 mmspindle taper: SK 30 spindle turning speed range: 80 - 2200 U/minfeeds X-axis: 50 - 550 mm/minfeeds Y-axis: 50 - 550 mm/minrapid traverse: 1500 mm/minquill stroke: 45 mmvertical head swivelling: +/- 90 °total power requirement: 1,4 kWweight of the machine ca.: 500 kgdimensions of machine L x W x H: 1,50 x 1,20 x 1,60 mAccessories: DRO on 3 axis HEIDENHAIN, solid table, vertical head with quill retraction, counter bearing, various short and long tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Universal Tool Milling Machine Fritz Werner Type 5130 Extremely robust and precise universal tool milling machine from the traditional German quality manufacturer Fritz Werner (model 5130) This conventional bracket milling machine impresses with its solid grey cast iron design and maximum reliability. It is ideal for workshops, toolmaking, repair shops, demanding do-it-yourselfers or training institutions. The machine has a swivelling vertical milling head with manual quill feed (perfect for additional drilling work) as well as a mechanical feed gear. An absolute highlight is the retrofitted premium safety spindle protection from Tecno Più Technical data at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Type: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with tightening rod) Table d ...
X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening ...
This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1998. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details.
This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details.
This 3-axis DMG DECKEL MAHO DMC 635V vertical machining centre was manufactured in 2007. It features a tool holder SK 40, a 32-position random tool changer, and a spindle speed of 10,000 RPM. The machine dimensions include a 790 X 560 mm table surface and a load capacity of approximately 600 kg. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine.
This Okuma MA-500HA was manufactured in 2004. A robust horizontal machining centre, it features a spacious X-axis travel of 700mm, Y-axis of 900mm, and Z-axis of 980mm. It includes a high-speed spindle capable of 20000 RPM and an efficient through coolant pump. For more information about this horizontal machining centre, please reach out to us.
Mikron WF 41C CNC Universal Milling and Drilling Machine Professional, extremely robust CNC universal milling and drilling machine MIKRON WF 41C Due to its stable design, the machine is ideal for workshops, prototype construction, maintenance or demanding toolmaking. The machine is equipped with the proven HEIDENHAIN TNC 155 web control system Thanks to plain text dialog guidance, it is extremely easy to program directly on the machine, masters graphical simulations and allows easy loading of external CNC programs via the serial interface (ideal for CAD/CAM use). Technical data at a glance CNC control Model: HEIDENHAIN TNC 155 Operating modes: manual operation (such as digital display), positioning with manual input, single set, sentence sequence, program test (graphic simulation) Interface: V.24/RS-232-C for data transmission Feed Drives & Travel Paths Travel ...
Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-groomed operation and impresses with the proverbial micron precision as well as the generous working range (up to 900 mm travel in X). It is ideal for toolmaking, prototyping, training or demanding repair shops. Technical data at a glance (manufacturer's specifications): Working range & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Working spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main Drive & Feed: Drive power spindle: 11 kW (at 44% ED) / 7.5 kW (at 100% ED) Feed speed (X, Y): 0 – 10,000 mm/min (programmable) Feed speed (Z): 0 – 8,000 mm/min ...
Incl. chip conveyor Dimensions: 3700x2270x2820mm Chip conveyor dimensions: 800x4000x1500mm Condition and details see pictures Year of manufacture 1996
CNC Bed Milling Machine KIHEUNG U1050 Control: Heidenhain iTNC 530 Year of Make: 2014 Internal machine no. 61 X-axis: 2,500 mm Y-axis: 1,050 mm Z-axis: 1,600 mm Tool holder: SK50 DIN ISO Tool magazine: 24-fold Facilities - Chip conveyors - Magnetic clamping plate - Handwheel HR410
This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm.
This Victor Vcenter-70APC Vertical Machining center was manufactured in the year 2007 in Taiwan. It is controlled by a Fanuc Series Ou-MC control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. This machine has head repaired, Z-Spindle, telescopic with new wiper blades and the grippers of the changing arm also repaired. Includes an internal cooling, new bearings and new tie rod springs.
