subcategories
(3rd category level)
Manufacturer:
(Category: 103)
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories-Tensioning tool: clamping bracket, various designs-Norm: according to TGL30--Bores: Ø 14/20/22/24/26 mm-Thread sizes: M10 / M16 / M20-Dimensions: Individual part pictures with dimensions can be sent-Price / fee: complete-Weight: 32 kg
Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing apparatus, dividing head, rotary indexing table Hydraulic rotary coupling -Manufacturer: Romheld, hydraulic reversible clamp with rotary coupling type 9284-003 711 -Number: 2x clamping unit available -Price per piece -Dimensions: 700/335/H430 mm -Weight: 113 kg/pc.
Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Clamping table: milling machine table T-slot table-Table surface: 400 x 250 mm-Y-axis: 95 mm movable, hand crank with fine adjustment, see photos-T grooves: groove width 16 mm, groove spacing 63 mm-Total dimensions: 455/400/H140 mm-Weight: 40 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg
Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection,-Width: 730 mm-Extendable to: 1600 mm-Number: 2x covers available-Price: complete for 2 pieces-Dimensions: 1600/730/165 mm-Weight: 34 kg/piece
Clamping table, clamping angle, milling machine table-Clamping angle: for workpiece clamping-Table surface: 995 x 197 mm, height 995 mm -Wall thickness: 39 mm-Bores: M20-Clamping grooves: 172 x 21 mm-Dimensions: 995/197 / H995 mm-Weight: 160 kg
Year: 2016 - technically efficient, ready to work – after full service - motor: 3 kW/400V - milling diameter: 250 mm - milling width: 305 mm - material stop can be rotated in both directions up to 20° - vertical and horizontal pneumatic profile clamping - compressed air preparation station - cooling and lubrication system
Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad ...
x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmdigital readout: 3 Achsen HEIDENHAINspindle taper ISO: 40 DIN 69871Aspindle turning speed range: 50 - 4000 U/mintable-size: 800 x 400 mmtable load: 400 kgfeeds -stepless-: max. 2000 mm/minrapid traverse: 5 / 4 m/minpower capacity - milling spindle: (S1) 10,5 kWquill stroke: 80 mmcoolant: voltage: 400 Vtotal power requirement: 17,5 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 2,00 x 2,76 x 2,05 m- Serial-No.: 90395- Digital display HEIDENHAIN ND780- electr. handwheel- mechanical handwheels- stepless speed control- stepless feed drives- horizontal milling spindle- coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 500 mmz-travel: 400 mmtable-size: 900 x 530 mmcontrol: Heidenhain TNC 355 tool adaptor: ISO 40 | |turning speed range: 40- 4000 U/minrapid speed: 5 / 6 m/minfeed speeds: 2 - 3000 | mm/min |power requirement: 6 kWtable load: 350 kgdimensions: 2,6 x 1,8 x 2,2 mweight: 2,6 tUnivers. milling machine 3 axis- external electric handweel- housing- universal headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.
3 Axis Digital Display FAGOR Year of Make: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Universal table 660 x 380 mm clamping surface Vertical milling head Extendable drill quill Milling cutter protective housing Machine Light Various tool holders SK 40 Chip tray Coolant Setup 4 pcs machine shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION
CATEGORY — 5 Axis MANUFACTURER — DMG MORI MODEL — DMU 85 MONOBLOCK STOCK NUMBER — ONY100000587 MODEL YEAR — 2013 CONTROL PANEL — SIEMENS 840 D SOLUTIONLINE AXIS STROKE — X 935 MM / Y 850 MM / Z 650 MM ROTARY AXIS MOVEMENTS — A +/- 120 ° / C 360 ° SPINDLE SPEED — 18.000 MIN/-1 POWER CAPACITY-MAIN SPINDLE — 35 kW (40% ED) MAX. TORQUE — 135 Nm (40% ED) TOOL HOLDERS — SK 40 NUMBER OF TOOLPOSITIONS — 30 TABLE SURFACE AREA — 1.000 X 750 MM ( d 850 X 750 MM) MAX. TABLE LOAD — 1.000 KG TOTAL POWER REQUIREMENT — 46 KVA WEIGHT OF THE MACHINE — 13.500 KG DIMENSIONS OF THE MACHINE — 3.15 X 3.92 X 3.21 M
used
GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110° ...
x-travel: 550 mmy-travel: 305 mmz-travel: 460 mmtable-size: 820 x 320 mmtool adaptor: BT 40 turning speed range: 10000 U/minpower requirement: 11 kWControl: Sinumerik Steuerung 828D rapid traverse Z-axis: 1500 mm/minrapid traverse X- and Y-axis: 1500 mm/minworkpiece weight: 300 kgno. of tools in the magazine: 12 Stückdimensions: 2164 x 1860 x 2200 mmweight of the machine ca.: 2800 kg immediately available- Siemens Sinumerik control 828D with 15.6 inch touch display- Heavy-duty design- High productivity- High reliability- Heavily ribbed, torsion-free machine base- Profile rail with roller recirculation in all axes for high payloads- High-torque servo drives, directly connected to the ball screw in all three axesthree axes- Precision-ground, preloaded high-performance recirculating ball screw (á 40mm x P16 x C3) for high rapid traverse speeds in all axes- Telescopic guideway cover on all ...
x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmc-axis: 360 °B-axis (table): -50 / + 110° mmturning speeds: 10.000 U/minspindle taper ISO: 40 DIN 69871 Control: Heidenhain TNC 620 total power requirement: 13 / 9 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 6 x 3 x 3 mOptions:- 30-pocket magazine with double gripper- Production package with Internal Coolant + chip conveyor- 360 L coolant tank- Blow-off air- Coolant gun- Electronic handwheel- HEIDENHAIN TS 649 infrared probe- Direct measurement systemNew motor spindle in 2022The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.
x-travel: 1.150 mmy-travel: 710 mmz-travel: 710 mmb-axis: +30 / -120 °surface area: 1.500 x 795 mmmilling head: universal, stufenlos spindle: 28 kWturning speeds: 20 - 18.000 U/mintool changer: auto. number of tools: 60 Control: HEIDENHAIN iTNC530 weight of the machine ca.: 12 tdimensions of the machine ca.: 6 x 3,2 x 3,4 mCNC universal milling machine in a very stable ‘monoBLOCK’ design, ideal for single-part andsmall-batch production with swivel spindle, NC dividing head and tool magazine.• NC-swivel milling head hydraulically clampable, with HSK-A63 spindle taper and 18,000rpm motor spindle• LEHMANN vertical NC dividing head mounted on the machine table for 5-axissimultaneous machining with tailstock• DMG ERGOline® Control with 19 screen and HEIDENHAIN iTNC530 3D contouringcontrol• Production package with RotoClear viewing window, 600-litre coolant tank, chip flushingin ...
max. wheel diameter: 500 mmgear width: 400 mmmax. module: 10 mmControl: SIEMENS Sinumerik 840D sl max. workpiece diameter: 500 mmMax. Distance from table to counterholder: 1.120 mmMax. Distance table to center of milling spindle: 585 mmMin./max. center distance between milling spindle: 50/475 mmtable diameter: 420 mmtable hole - depth: 150 mmTable equipped with hydraulic clamping device: : milling spindle: : milling spindle speeds: 48- 480 1/min stufenlosmilling head swivelling angle: +/- 50 A-Achse Gradtool taper: SK 40 Tangential path of the milling carriage: 200 mmmilling cutter diameter: 170 mmMax milling width: 250 mmelectrical supply data: : voltage: 400 Voperating frequency: 50 Hzconnecting power: 55 kVAweight of the machine ca.: 10,5 tdimensions of the machine ca.: 6,2 x 4,2 x 3,e mEquipment and Accessories• High-performance CNC gear hobbing machine LIEBHERR LC502, particula ...
Used machine Vertical machining center Machine type: DMG DMC 635 V/P Control: Heidenhain iTNC 530 Year of Make: 2013 TECHNICAL DATA: Travels: X-axis: [mm] 635 Y-axis: [mm] 510 Z-axis: [mm] 460 Speed range: [1/min.] 10,000 Tool holder: SK 40 Tool Changer Tool positions: 30 Pallet system Number of pallets: 2 Table size: [mm] 560 x 790 Features: No internal cooling (IKZ) Electronic handwheel Probe TS649 Tool breakage detection table switches Chip rinsing gun This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 TECHNICAL DATA: 5. Axis 3 + 2 axes non-simultaneous X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 520 Rapid traverse: (X/Y/Z) [m/min.] 30 Max. speed: [1/min.] 12,000 Drive power: [kW] 13 Torque: [Nm] 82 Tool holder: HSK63 Tool positions: 60 NC swivel rotary table B-axis -10° / +95° C-axis 360° Table size: [mm] 800 x 620 Max. table load: [kg] 350 Space requirement (LxWxH): [m] 5.35 x 4.14 x 3 Machine weight: [kg] 4,700 Features: Chip conveyor Internal cooling (IKZ):40 [bar] Tool breakage detection Heidenhain TS 27 R Probe Heidenhain Blum Lasers for Tools Direct Path Measurement System Electronic handwheel Machine preparation for DMG MORI PH 150 - Automatic lifting door on the right - Robot interface (DMG MORI standard) - ...
Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...
Used machine Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 #001312 Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor ...
Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
