Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 103-207)

TOS 1
milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 128342092

used

check Seller: EnTeHa GmbH & Co.KG
Location: 64625 Bensheim, Schwanheimer Straße 144 Land-de

add to watchlist

No. 3934: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 1, with active digital display ARB.-ber.: 300 x 160 x 340 mm, power: 1,5 kW Accessories: universal table hydraulic machine vise Tool Cabinet Other: Toolholder SK 40 RPM 2000 RPM

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 150412915
New in: 1988

used

check Seller: EnTeHa GmbH & Co.KG
Location: 69517 Gorxheimertal Land-de

add to watchlist

No. 3287: 1 gebr. Universal toolmilling machine Fabr. DECKEL, type FP 1, Bauj. 1988 with active digital display Arb.-Ber.: 300 x 160 x 340 mm, drive power: 1.5 kW Accessories: rigid angular table Table size 210 x 600 mm Universal table Counterholder Other: Speed range 2000 rpm Tool holder SK-40

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162397858
New in: 1979

used

check Seller: Plum & Partner Werkzeugmaschinen GmbH
Location: Bünde bei Bielefeld Land-de

add to watchlist

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmspindle taper: ISO 40 spindle turning speed range: 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1200 mm/mincreep feed: 4 mm/mincontrol: Heidenhain TNC 113 total power requirement: 1,6/2 kWweight of the machine ca.: 570 kgdimensions of the machine ca.: 1,2 x 1 x 1,75 mVideo available on our website.: Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 600 x 210 mmTaper: Opposite bearing for horizontal milling unit: Bellows with slats of aluminium: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of L ...

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 161716296
New in: 1976

used

check Seller: Plum & Partner Werkzeugmaschinen GmbH
Location: Bünde bei Bielefeld Land-de

add to watchlist

x-travel: 400 mmy-travel: 220 mmz-travel: 400 mmspindle taper: ISO 40 spindle turning speed range: 25 - 2500 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1200 mm/mincreep feed: 4 mm/mincontrol: Heidenhain TNC 113 total power requirement: 2 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: mCondition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 700 x 330 mmTaper: diverse Bellows with slats of aluminium: Protection cabin: bottom tray: Machinefeets: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / Universal Tool-Milling Machines
date: 11.04.2024 add to watchlist
approved
dealer
item-No.: 163786675
New in: 1981

used

Location: Land-de

add to watchlist

Machine Type: NC Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 3 A Year of construction: 1981 Condition: very good Offer Type: Used Machine Specifications: Control: CNC 2101 Positioning Track Control Table: 800 x 460 mm Travel range: x = 500 mm y = 300 mm z = 400 mm Speed range: 25 - 2500 rpm. Spindle holder: SK40 with automatic tool clamping Propulsion: 2.0 / 4.0 kW Remark: NC and conventional operation possible, with handwheels in all axles, Drilling quills in vertical and horizontal, Central lubrication Machine light Weight: 1700 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162944829
New in: 1979

used

Location: Land-de

add to watchlist

x-travel: 490/500 mmy-travel: 290/300 mmz-travel: 370/380 mmturning speeds: max. 2500 U/minfeed: 10-500 mm/minrapid traverse: 1500 mm/minquill stroke: 100 mmtool taper: Sk 40 x S 20 x 2 drive motor: 3,0 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: mMechanic: good: Optical condition: good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 central lubrication: 3 Achs Aktiv Heidenhain Digitalanzeige Zentralschmierung Abstreifer und Faltenbälge wurden getauscht Vertikalkopf Sk 40, Kühlmitteleinrichtung Spänewanne fester Winkeltisch 800 x 420 mm ca. 10 Spannwerkzeuge nach Wahl LED-Leuchte - auf Wunsch neuBedienungsanleitung, Ersatzteilliste, Schaltplan, BedienschlüsselMaschine ist werkstattgeprüft und mit elektrischem Prüfprotokoll !Maschine ist auf Wunsch bei Auslieferung an die Maschinenrichtlinien angelehntund dann mit einem verr ...

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163560153

used

check Seller: WMT GmbH & Co. KG
Location: Velen-Ramsdorf (46342)

add to watchlist

x-travel: 500 mmy-travel: 300 mmz-travel: 380 mmturning speeds: 40 - 2000 U/mincontrol: konventionell quill stroke: 100 mmspindle drive: 3,0 kWtool taper: SK 40 table-size: 420 x 800 mmtotal connection load: 4,5 kVAweight of the machine ca.: 1,25 tdimensions of the machine ca.: 1,4 x 1,0 x 1,9 mUniversal milling machine- Coolant system- SK40 tool holder- Rapid traverse- some tools see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 150412916
New in: 1982

used

check Seller: EnTeHa GmbH & Co.KG
Location: 69517 Gorxheimertal Land-de

add to watchlist

No. 4427: 1 gebr. Machine milling machine Fabr. DECKEL, type FP 4 L, Bauj. approx.82 with 3-axis digital display (1 digital display) Arb.-Ber.: 1200 x 400 mm, Accessories: Rigid angular table Div. Recordings SK 40 Other: Weight approx. 3.5 to Space requirement 3 x 2 x 2 m

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162855112
New in: 1988

used

check Seller: WeMa A. Pigge GmbH
Location: Goldenstedt Land-de

add to watchlist

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmdigital readout: Heidenhain 3 Achsen spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/mintable-size: 650 x 375 mmweight of the machine ca.: 1,5 tdimensions: ca. mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162855111

used

check Seller: WeMa A. Pigge GmbH
Location: Goldenstedt Land-de

add to watchlist

x-travel: 800 mmy-travel: 400 mmz-travel: 300 mmdigital readout: Heidenhain table surface area: 1000 x 520 mmturning speed range: 40 x 2000 U/minspindle taper: SK 40 total power requirement: 2,2 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 1700 x 1600 x 1800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / Universal Tool-Milling Machines
date: 13.11.2023 add to watchlist
approved
dealer
item-No.: 158500218

used

check Seller: Zölch GmbH & Co. KG
Location: Land-de
Price: 1.890 € add to watchlist

Tool changer for DMC60 U with 120 tools. . Probably also fits DMU 60P, 80P, DMU 125.

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 128342098
New in: 2004

used

check Seller: EnTeHa GmbH & Co.KG
Location: Land-de
Price: VB 4.500 € add to watchlist

No. 4293: 1 gebr. Universal tool milling machine Fabr. EPPLE, type UFM 100 Digi,. Bu. 2004 with 3-axis digital display ARB.-ber.: 620 x 250 x 440 mm, Accessories: table 1120 x 260 mm Universal milling head Other: Spinedel SK 40 Spindle speed 40 - 1600 min-1 Weight 1600 kg

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163643410
New in: 1997

used

check Seller: Emuk Werkzeugmaschinen GmbH
Location: Malsch

add to watchlist

x-travel: 600 mmy-travel: 450 mmz-travel: 400 mmControl: Heidenhain 430 ITNC tool taper: SK 40 spindle turning speed - stepless: 13465 U/minvoltage: 400 Vcontrol voltage: 24 Vweight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / Universal Tool-Milling Machines
date: 03.10.2023 add to watchlist
approved
dealer
item-No.: 160331654
New in: 1990

used

check Seller: WMH24
Location: 73563 Mögglingen Land-de

add to watchlist

Control HeidenhainTNC355 Travel X/Y/Z: 600 x 400 x 420 mm Clamping surface 900 x 458 mm Spindle holder SK 40 Dividing apparatus

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 150412918
New in: 1984

used

check Seller: EnTeHa GmbH & Co.KG
Location: 69517 Gorxheimertal Land-de

add to watchlist

No. 1909: 1 gebr. Universal milling machine Fabr. HURON, type MU-55, Bauj. 1984 with 3-axis active digital display TNC-114 Arb.-Ber.: 1300 x 1000 x 550 mm, drive power: 9 kW Accessories: Table clamping surface 1635 x 700 mm, coolant device, Universal milling head infinitely adjustable feeds via DC drive Other: Speed range 30-2060 rpm Spindle holder SK-40 Space requirement approx. 3.5 x 4.5 x 1.75 m, weight approx. 4.8 tons.

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 128342126
New in: 1995

used

check Seller: EnTeHa GmbH & Co.KG
Location: 64625 Bensheim, Schwanheimer Straße 144 Land-de

add to watchlist

: 4471 No.1 gebr. Universal milling machine Fabr. IBERIMEX, type U 1000, b. 1995 with digital display Visulesta 4 ARB.-ber.: 1000 x 540 x 430 mm, power: 5.5 kW Accessories: table size 1500 x 360 mm Documentation Other: ISO 50 spindle adaptor Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 to

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156214073
New in: 1972

used

check Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Location: Metzingen Land-de

add to watchlist

x-travel: 300 mmy-travel: 350 mmz-travel: 150 mmtotal power requirement: 2,5 kWweight of the machine ca.: 700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 155415490
New in: 1988

used

check Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Location: Metzingen Land-de

add to watchlist

x-travel: 310 mmy-travel: 340 mmz-travel: 170 mmtotal power requirement: 2,5 kWweight of the machine ca.: 900 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 153915691
New in: 1984

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition

milling machines / Universal Tool-Milling Machines
date: 15.02.2024 add to watchlist
approved
dealer
item-No.: 163227155

used

check Seller: Zölch GmbH & Co. KG
Location: Land-de
Price: 6.500 € add to watchlist

Key data: 310 mm, 170 mm, 340 mm

Built in 1990, with 3-axis digital display. Spindle holder ISO 40, travels 310 x 170 x 340 mm, 16 spindle speeds from 40 - 2000 rpm, 16 feeds from 9 - 450 mm/min, motor power 1.2/1.8 kW, weight 700 kg. The machine is in good condition.

milling machines / Universal Tool-Milling Machines
date: 12.03.2024 add to watchlist
item-No.: 163560968

used

Seller: Maschinenhandel Nord
Location: 17034 Neubrandenburg Land-de
VS

add to watchlist

Universal Tool Milling Machine Make: MAHO Model: MH 1000 Technically flawless Accessories: - 3-axis digital display - Universal table 1,250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. Quill feeds 0.02/0.03/0.05/0.08/0.12/0.20 mm/rpm - Central lubrication, manually operated - Coolant device -Operating instructions The machine is open to the public. Ready for immediate use Delivery possible throughout Europe

milling machines / Universal Tool-Milling Machines
date: 22.01.2024 add to watchlist
approved
dealer
item-No.: 143114198
New in: 1978

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: 65197 Wiesbaden, Flachstr. 11 Land-de

add to watchlist

Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

milling machines / Universal Tool-Milling Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163400163

used

check Seller: WeMa A. Pigge GmbH
Location: Goldenstedt Land-de

add to watchlist

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmrapid traverse: 1,2 m/minfeed stepless: 0 - 500 mm/minweight of the machine ca.: 1750 kgdimensions: ca. 1450 x 1800 x 1710 mmincluding hydraulic machine vice with turntableaccessories: various holders and cutters (see photos) as well as various milling toolsMachine was used in a public facility and is in good condition.Machine can be viewed under power by prior appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 150412913
New in: 1972

used

check Seller: EnTeHa GmbH & Co.KG
Location: 69517 Gorxheimertal Land-de

add to watchlist

No. 1859: 1 gebr. Universal toolmilling machine Fabr. MAHO, type MH 800, Bauj. 1972 Arb.-Ber.: 700 x 450 x 450 mm, Accessories: Universal recessed round table 1050 x 627 mm, Pinole feed gearbox 0.02-0.2 mm/U. Other: Spindle ISO-40, speed range 32-1600 rpm, Feeds 5-500 mm/min, rapid speed 1.4 (0.7) m/min. Table cross shift by hand 225 mm, Rotational movement of the table top 360° Table swivel/tilt each +- 30°. Space requirement approx. 2 x 3 x 3 m, weight approx. 3.3 tons.

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 151304730
New in: 1973

used

check Seller: EnTeHa GmbH & Co.KG
Location: 69517 Gorxheimertal Land-de

add to watchlist

No. 2456: 1 gebr. Universal toolmilling machine Fabr. MAHO, type MH 800, Bauj. 1973 with 3-axis digital display Mitutojo Arb.-Ber.: 700 x 450 x 450 mm, drive power: 4 kW Accessories: Universal recessed round table 1050 x 627 mm Pinole feed gearbox 0.02 - 2 mm/U Other: Spindle ISO 40, speed range 32 - 1600 rpm, Feeds 5-500 mm/min, rapid speed 1.4 (0.7)m/min Table cross shift by hand 225 mm, Rotational movement of the table top 360° Table swivel/tilteach +- 30° Space requirement approx. 2 x 3 x 3 m, weight approx. 3.3 tons.

milling machines / Universal Tool-Milling Machines
date: 27.11.2023 add to watchlist
item-No.: 145454514
New in: 1989

used

Seller: KS Maschinenservice
Location: Land-de

add to watchlist

Macho MH400 SK40 Used • Built: 1989 • Display: 3 axes digital display with control TNC135 • Speed: 50 - 3150 rpm • Feed: 5 - 670/1000 mm/min • Rapid speed: 1000 mm/min • Drive power: 5.1KW at 2500rpm. • Travel distances max. X/Y/Z: 400/375/250 mm • Equipment: Vertical & horizontal spindle with hydraulic feeder SK40 DIN 2080 • Vertical pinole: extendable - 60 mm • Angular table 550 x 260 mm T groove 14mm • Equipment: machine light, counter holder • Available optional equipment: Universal table / Round table / Partial apparatus / Counter bearing / Shock head etc. • Dimensions; LxWxH approx. 1,680 x 2,300 x 1,810 meters • Weight: approx. 850 KG Figure: Machine so, or similar

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 135070342

used

check Seller: EnTeHa GmbH & Co.KG
Location: Land-de

add to watchlist

No. 4614: 1 used Universal milling machine make MIkRON, type WF 31 SA, with HEIDENHAIN TNC 114 work range: 560 x 500 x 400 m Accessories: rigid angle table SK 40 Coolant system Other: Speed range 40-4000 RPM Weight 2450 kg

milling machines / Universal Tool-Milling Machines
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 147498952
New in: 1992

used

check Seller: EnTeHa GmbH & Co.KG
Location: 64625 Bensheim Land-de

add to watchlist

Feed drive Infinitely adjustable Electronic handwheel can be switched to 3-axis Hydr. Tool tension rigid angular table: 900 x 530mm Central lubrication automatically Vertical milling head Pinole vertically extendable 90mm stroke Chip catch bowl Coolant device Documentation Geometric acceptance protocol similar to DIN 8615 Speed geom. graded: 21 Speed range vertical/horizontal: 40-400 min-1 Tool holder: SK 40 DIN 2080 Weight: approx.2.300 kg Table load: 500 kg Painting: RAL 6011 green Dimensions: approx. 2.20 m x 2.20 m x 2.10 m Test log attached

milling machines / Universal Tool-Milling Machines
date: 26.11.2023 add to watchlist
approved
dealer
item-No.: 162866852

used

check Seller: Zölch GmbH & Co. KG
Location: Land-de
Price: 13.900 € add to watchlist

Key data: 420 mm, 250 mm, 350 mm

with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!

milling machines / Universal Tool-Milling Machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 160757561

used

check Seller: ETAP-Development and engenering
Location: 8000 Novo mesto Land-si

add to watchlist

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

milling machines / Universal Tool-Milling Machines
date: 22.01.2024 add to watchlist
approved
dealer
item-No.: 136334074

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Land-de

add to watchlist

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

milling machines / Universal Tool-Milling Machines
date: 18.03.2024 add to watchlist
item-No.: 159130416

used

Seller: Keetels Machines BV
Location: Land-nl
Price: 5.900 € add to watchlist

Displacement of the X-axis: 850 mm Displacement of the Y-axis: 300 mm Displacement of the Z-axis: 420 mm Spindle holder: ISO 50 Spindle speeds: 45 - 2,000 rpm. Digital display: Heidenhain 2-axis Table size: 1200 x 320 mm Feed X and Y: 14 - 900 mm/min. Feed Z:4 - 250mm/min. Rapid traverse X and Y: 2,800 mm/min. Rapid traverse Z:800 mm/min. Equipped with: - Cooling device - Machine clamp Country of origin: Czech Republic Spindle motor: 5.5 kW Machine weight: 3,300 kg Machine LxWxH:300 x 270 x 200 cm

milling machines / Universal Tool-Milling Machines
date: 28.03.2024 add to watchlist
approved
dealer
item-No.: 158290015

used

check Seller: FH-SMG
Location: 7547S Enschede Land-nl

add to watchlist

tags for table feed box

milling machines / Universal Tool-Milling Machines
date: 29.11.2023 add to watchlist
approved
dealer
item-No.: 162879715

used

check Seller: MVRG UG (haftungsbeschränkt) & Co. KG
Location: 99099 Erfurt Land-de
Price: VB 6.750 € add to watchlist

Item condition: well-maintained Availability: immediately Volts: 380 Heart: 50 Table length (mm) approx.:1120 Table width (mm) approx. 255 Milling paths: longitudinal (mm) approx.: 750/ 850 transverse (mm) approx.: 400 vertical (mm) approx:400 Upper arm movement (mm) approx.: 570 Quill movement (mm) approx.: 130 Standard Accessories - Hardened and ground guide paths - Central lubrication system - Coolant device - Variator head rpm approx. 60-40,000 infinitely variable - Motor approx. 2.2 kW

milling machines / Universal Tool-Milling Machines
date: 17.01.2024 add to watchlist
item-No.: 161549397
New in: 1977

used

Seller: PX-Maschinenhandel
Location: 73635 Rudersberg Land-de

add to watchlist

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information