Manufacturer:
(Category: 101)
Ref. -No.: 10566Manufacturer: MATSUURAYear of construction: 2003Type of control: CNC-SteuerungControl: Matsura G-Tech 16iStorage location: HalbestadtCountry of origin: JapanSerial no.: 3021XXXX X-Travel: 600 mmY-Travel: 600 mmZ-Travel: 600 mmB-Axis: 360 °Max. Workpiece Weight: 250 kgMax. Tool Weight: 10 kgMax. Tool Length: 350 mmMax. Tool Diameter: Ø 150 mmMax. Size Of Workpiece Lxwxh: Ø 650 x 750 mmTool Taper: SK-40 Tool Piece Magazine With: 50 Pcs./pcs.Spindle Speed: 12000 RPMMachine length: 5000 mmMachine width: 3000 mmWeight Of The Machine Ca.: 7,5 tFurther information:The machine can be viewed under power by arrangement.
Ref. -No.: 10581Manufacturer: HEDELIUSYear of construction: 2008Type of control: CNC-SteuerungControl: HEIDENHAIN iTNC 530Storage location: HalberstadtCountry of origin: GermanyX-Travel: 945 mmY-Travel: 800 mmZ-Travel: 600 mmC-Axis: 360.000 x 0,001 °Spindle Taper: ISO 40 Table Load: 600 kgTool changer: 30 fach Spindle Speed: 10 - 8000 RPMDrive Capacity - Spindle Motor: 27 kWTotal Power Requirement: 55 kWWeight Of The Machine Ca.: 16 tA-axis (swivel axis): +10 / -90 °Table clamping area: 800 x 630 mmFurther information:- Pendulum machining with swivel rotary table and fixed machine table- Coolant system, chip conveyor- Complete housingThe machine can be viewed under power by arrangement.
Ref. -No.: 10587Manufacturer: POSMILLYear of construction: 2017Type of control: CNC-SteuerungControl: Heidenhain 530Storage location: HalberstadtCountry of origin: GermanyMachine-No.: 2017XXXX X-Travel: 640 mmY-Travel: 820 mmZ-Travel: 600 mmC-Axis: 360 °Tool Taper: HSK - A63 Numbers Of Tools In Magazin: 96 Turning Speeds: 18000 RPMMachine length: 3500 mmMachine width: 5000 mmMachine Height: 4150 mmWeight Of The Machine Ca.: 20 tA-axis (swivel axis): + / - 120 °spindle running time: 11200 HTable Diameter: 800 mmload capacity: 1200 kgOperating hours: 20227 HFurther information:- POS including a Meusburger zero-point clamping plate and a Cimatron programming stationThe machine can be viewed under power by arrangement.
Ref. -No.: 10588Manufacturer: HEDELIUSYear of construction: 2000Type of control: CNC-SteuerungControl: Heidenhain TNCStorage location: HalberstadtCountry of origin: GermanyMachine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm)X-Travel: 3200 mmY-Travel: 720 mmZ-Travel: 600 mmTable Height: 900 mmNumber of T-slots: 5 Max. Workpiece Weight: 3000 kgMax. Tool Length: 330 mmClamping Area: 3900 x 650 mmT - groove width: 18 mmT - slot spacing: 125 mmTool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPMMax. Torque: 102 x 240 NmFeed Speeds X/Y/Z Axis: 30000 mm / minRapid Travel X/Y/Z: 30 / 30 / 30 mm / minTotal Power Requirement: 50 kWBorehole Diameter: 28 x 44 mmMax. Feed force: 9000 / 9000 / 9000 kNDistance between spindle nose and table: 140 - 740 mmNumber of tools: 30 PcsTool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x ...
Ref. -No.: 10596Manufacturer: HELLERYear of construction: 2017Type of control: CNC-SteuerungControl: Siemens 840 DStorage location: HalberstadtCountry of origin: GermanyMachine-No.: 56XXX X-Travel: 630 mmY-Travel: 630 mmZ-Travel: 630 mmB-Axis: 0,001 °Table Load: 500 kgMax. Tool Length: 350 mmMax. Tool Diameter: 160 mmTool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPMTool changer: Doppelgreifer Max. Workpiece height: 850 mmMax. Torque: 95 NmRapid Travel X/Y/Z: 60 mm / minRapid Traverse X-Axis: 80 m / minRapid Travel Y-Axis: 80 m / minRapid Traverse Z-Axis: 90 m / minDrive Capacity - Spindle Motor: 40 kWInternal cooling: 50 barNumbers Of Pallets: 2 Size Of Pallet: 400 x 500 mmspindle running time: 1000 HOperating hours: 3000 HWorkpiece interference circuit max.: 720 mmMedia interface: 5 - fach Further information:- Equipped with NC rotary table.- State-of-the-art ...
Ref. -No.: 10598Manufacturer: HELLERYear of construction: 2011Type of control: CNC-SteuerungControl: Siemens 840 D slStorage location: HalberstadtCountry of origin: HermanyMachine-No.: 50XXXX X-Travel: 800 mmY-Travel: 800 mmZ-Travel: 1000 mmWork spindle torque (25% ED): 242 NmTool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs.Turning Speeds: 10000 RPMDrive Capacity - Spindle Motor: 17 kWHigh-Pressure Pump: 50 barSpeed range - main spindle: 10000 RPMNumbers Of Pallets: 2 Size Of Pallet: 630 x 500 mmWeight Of The Machine Ca.: 13000 tspindle running time: 7000 HOperating hours: 14000 HPreparation area: 4 x 90° hydraulic pressure: 200 barFurther information:- The machine has been measured- The geometry is in excellent condition- The spindle runs a little rough- Clamping towers and cutting tool holders are also included- 2 additional clamping towers- 2 re ...
Ref. -No.: 10604Manufacturer: UNIONYear of construction: 2004Type of control: CNC-SteuerungControl: SINUMERIK 840 D PowerlineStorage location: HalberstadtCountry of origin: GermanyX-Travel: 2000 mmY-Travel: 1250 mmZ-Travel: 1000 mmW-Axis: 550 mmTable Height: 1050 mmSpindle Diameter: 110 mmTable Dimensions (Lengthxwidth): 1600 x 1250 mmNumber of T-slots: 10 Max. Workpiece Weight: 6000 kgClamping Area: 1250 mmT - groove width: 22 mmT - slot spacing: 125 mmTool Taper: ISO 50 Max. Torque: 1639 NmFeed Speeds X/Y/Z Axis: 6000 mm / minRapid Traverse X-Axis: 15000 m / minRapid Travel Y-Axis: 15000 m / minRapid Traverse Z-Axis: 15000 m / minFeed Capacities X/Y/Z: 16000 x 16000 x 20000 Nswivel angle: 360 °Further information:Includes angle head 0,001°The machine can be viewed under power.
Ref. -No.: 10621Manufacturer: PAMAYear of construction: 2008Type of control: CNC-SteuerungControl: SIEMENS SINUMERIK 840 D PLStorage location: HalberstadtCountry of origin: ItalyX-Travel: 3500 mmY-Travel: 2500 mmZ-Travel: 2200 mmW-Axis: 800 mmBore Spindle Diameter: 160 mmTable Load: 12000 kgTool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPMMax. Torque: 2.765 NmRapid Travel X/Y/Z: 25000 mm / minDrive Capacity - Spindle Motor: 46 kWInternal cooling: 15 / 45 barExternal cooling: 50 / 4 barTable surface: 1600 x 2000 mmSpindle speed gear stage 1: 2.120 1 / minSpindle speed gear stage 2: 2.765 1 / minFurther information:Automatic tool changer SK50 DIN 69871, 80 positions.Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm.Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm.Automatic accessory changer, 2+1 units.Touch probe ...
Ref. -No.: 10627Manufacturer: AUERBACHYear of construction: 2005Type of control: CNC-SteuerungControl: Heidenhain 530Storage location: HalbrstadtCountry of origin: GermanyX-Travel: 3200 mmY-Travel: 2000 mmZ-Travel: 1600 mmB-Axis: 360 °C-Axis: 360 °Spindle Taper: SK 50 Rotary Table (Lxw): 2500 x 2000 mmTable Load: 20.000 kgTool Piece Magazine With: 100 Pcs./pcs.Operating hours: 75.377 HSpindle hours: 28.246 HMachine length: 7300 mmMachine width: 7700 mmMachine Height: 4350 mmWeight Of The Machine Ca.: 28 tFurther information:- with H / V headMachine can be viewed under power by arrangement
Ref. -No.: 10628Manufacturer: AUERBACHYear of construction: 2008Type of control: CNC-SteuerungControl: HeidenhainStorage location: HalberstadtCountry of origin: GermanyX-Travel: 3200 mmY-Travel: 2000 mmZ-Travel: 1600 mmRotary Table (Lxw): 2500 x 2000 mmNo. Of Working Stations: 60 Machine length: 7300 mmMachine width: 7700 mmMachine Height: 4350 mmWeight Of The Machine Ca.: 28 tFurther information:- with -H / V- headMachine can be viewed under power by arrangement
Ref. -No.: 10631Manufacturer: DECKEL MAHOYear of construction: 2022Type of control: CNC-SteuerungControl: Siemens Sinumerik 840 DStorage location: HalberstadtCountry of origin: GermanyX-Travel: 1600 mmY-Travel: 1400 mmZ-Travel: 1100 mmB-Axis: 210 °C-Axis: 360 °Table Load: 3000 kgMax. Workpiece Weight: 3500 kgMax. Tool Weight: 15 kgMax. Tool Length: 650 mmMax. Tool Diameter: 110 mmClamping Area: Ø 1400 mmTool Taper: SK 50 Numbers Of Tools In Magazin: 240 Turning Speeds: 2300 RPMSpindle Turning Speed - Stepless: 20 - 10.000 RPMMax. Torque: 14840 NmFeed Speeds X/Y/Z Axis: 60000 mm / minMetric thread feeds: Ø 100 mmRapid Travel X/Y/Z: 60 mm / minDrive Capacity - Spindle Motor: 100% ED 25,00 kWWeight Of The Machine Ca.: 55 tDimensions Of The Machine Ca.: 12,5 x mSpindle speed gear stage 1: 0 - 12000 1 / minSpindle speed gear stage 2: 0 - 800 1 / minHolding torque: 14840 NmMax. rotation of ...
Ref. -No.: 10633Manufacturer: ANAYAKYear of construction: 2002Type of control: CNC-SteuerungControl: HeidenhainStorage location: HalberstadtCountry of origin: Germanyserial number: M200XXX X-Travel: 2000 mmY-Travel: 1500 mmZ-Travel: 1500 mmNo. Of Working Stations: 90 Control: 106.253 Hmachine: 93.170 HProgram run: 41.859 HHead and turntable: 1600 x 1450 mm
Ref. -No.: 10636Manufacturer: TOS VARNSDORFYear of construction: 2013Type of control: CNC-SteuerungControl: Heidenhain 530Storage location: HalberstadtCountry of origin: Czech RepublicX-Travel: 3500 mmY-Travel: 2000 mmZ-Travel: 1250 mmW-Axis: 800 mmB-Axis: 360 °Table Load: 15.000 kgTool Taper: SK 50 Turning Speeds: 1400 RPMSpindle Speed: 2000 RPMTable size: 1800 x 2200 mmFurther information:- The control system was converted to a HEIDENHAIN 530i in 2013.- All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013.- Accessories:- 3D probe - Heidenhain, large spindle support- 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine.- Newly packaged spare parts, covers from the machine.- All bearings have been replaced on the machine in recent years.- Tools and milling cutter heads are available.The machine is ...
Ref. -No.: 10648Manufacturer: HAITIANYear of construction: 2026Type of control: CNCControl: FANUC 0i-MFStorage location: HalberstadtCountry of origin: ChinaX-Travel: 1000 mmY-Travel: 600 mmZ-Travel: 600 mmSpindle Taper: SK 40 Table Dimensions (Lengthxwidth): 1200 x 600 mmTable Load: 800 kgMax. Tool Weight: 8 kgMax. Tool Length: 300 mmMax. Tool Diameter: 80 mmNumbers Of Tools In Magazin: 24 Turning Speeds: 8000 RPMRapid Traverse X-Axis: 36 m / minRapid Travel Y-Axis: 36 m / minRapid Traverse Z-Axis: 36 m / minDistance between spindle nose and table: 150 - 750 mmMachine length: 2800 mmMachine width: 3550 mmMachine Height: 2700 mmWeight Of The Machine Ca.: 6,5 tTool-tool change time: 2,5 secFeed rate X-axis: 15 m / minFeed rate Y-axis: 15 m / minZ-axis feed rate: 15 m / minPositioning accuracy: 0,008 / 0,006 / 0,006 X/Y/ZRepeatability: 0,005 / 0,004 / 0,004 X/Y/ZT-slot in the table: 5 x 18 ...
Ref. -No.: 10651Manufacturer: CHIRONYear of construction: 2006Type of control: CNCControl: SIEMENS SINUMERIK 840 D - Safety IntegratedStorage location: HalberstadtCountry of origin: GermanyMachine-No.: 498-XX X-Travel: 2000 mmY-Travel: 500 mmZ-Travel: 640 mmTotal Power Requirement: 29 kWWeight Of The Machine Ca.: 9,6 tFurther information:3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas.Tool Interface: SK40Working Area:X-axis: 2,000 mm (can be divided into 2 × 850 mm)Y-axis: 500 mmZ-axis: 640 mmEquipment:Screw chip conveyor with discharge to the left sideStand-alone Knoll coolant system for tool coolant supply and machine sump flushingThe machine can be inspected under power.
Ref. -No.: 10658Manufacturer: SCHARMANNYear of construction: 1973Type of control: CNCControl: HeidenhainStorage location: HalberstadtCountry of origin: GermanyMachine-No.: 162XXX X-Travel: 3.000 mmY-Travel: 2.000 mmZ-Travel: 1.250 mmSpindle Diameter: 140 mmSpindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mmTable Load: 15000 kgTurning Speeds: 2,3 - 810 RPMSpindle stroke: max.800 mmTotal Power Requirement: 30 kWTable size: 2.000 x 1.500 mmMachine length: 7300 mmMachine width: 5600 mmMachine Height: 4000 mmWeight Of The Machine Ca.: 31 tFurther information:- Faceplate with NC face slider and NC rotary table- Heidenhain digital readout- Various tool holders- Various clamping devicesThe machine can be viewed while powered on by prior arrangement.
Ref. -No.: 10659Manufacturer: DECKEL MAHOYear of construction: 2012Type of control: CNCControl: Haidenhein iTNC 530Storage location: HalberstadtCountry of origin: GermanyMachine-No.: 1541XXX X-Travel: 835 mmY-Travel: 510 mmZ-Travel: 510 mmNumber of T-slots: 5 Max. Tool Weight: 6 kgMax. Tool Length: 250 mmMax. Tool Diameter: 80 mmTool change time: 1,6 sT - groove width: 14 mmT - slot spacing: 100 mmTool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPMMax. Torque: 130 / 87 NmTurning Speed Range - Stepless: 30 mm / minTotal Power Requirement: 35 kWDimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 mWeight Of The Machine Ca.: 5 tChangeover time chip - chip: 6 secFeed rate: 1 - 20.000 (X / Y / Z)High pressure cooling: 20 barFurther information:The machine can be inspected while powered on by prior arrangement.
Ref. -No.: 10660Manufacturer: DECKEL MAHOYear of construction: 2008Type of control: CNCControl: Siemens 840D mit ShopmillStorage location: HalberstadtCountry of origin: GermanyX-Travel: 835 mmY-Travel: 510 mmZ-Travel: 510 mmMain spindle drive power: 14 kWTable Dimensions (Lengthxwidth): 1000 x 560 mmTable Load: 800 kgTool Taper: SK 40 Numbers Of Tools In Magazin: 20 Turning Speeds: 10000 RPMMax. Workpiece Weight: 4,5 tFurther information:- Chip conveyor- HandwheelThe machine can be inspected while powered on by prior arrangement.
Ref. -No.: 10662Manufacturer: STARRAG HECKERTYear of construction: 2009Type of control: CNCControl: Siemens 840DStorage location: HalberstadtCountry of origin: GermanyMachine-No.: 221XXX X-Travel: 2200 mmY-Travel: 1600 mmZ-Travel: 1850 mmSpindle Diameter: 100 mmMax. Tool Weight: 35 kgMax. Tool Length: 800 mmMax. Tool Diameter: 250 mmClamping Area: 1000 x 1250 mmTool Piece Magazine With: 60 Pcs./pcs.Max. Torque: 25.000 NmTurning Speed Range - Stepless: 40000 mm / minRapid Traverse: 40 m / minNumbers Of Pallets: 2 pallet change time: 47 sWeight Of The Machine Ca.: 26,5 tPosition uncertainty P: 0,008 mmPosition deviation Pa: 0,006 mmPositional dispersion Ps: 0,005 mmMaximum table rotation: 10 RPMFurther information:- Design: Thermally symmetrical column design with optimal chip flow for machining castings.- Applications: Mechanical engineering, energy technology, and the machining of large ...
Ref. -No.: 10663Manufacturer: UNIONYear of construction: 2003Type of control: CNCControl: Sinumerik 840DStorage location: HalberstadtCountry of origin: GermanyX-Travel: 6000 mmY-Travel: 3000 mmZ-Travel: 1000 mmW-Axis: 700 mmV-axis: 1500 mmB-Axis: 360 °Bore Spindle Diameter: 150 mmNumber of gear stages: 2 Max. Tool Weight: 30 kgMax. Tool Length: 500 mmWorkpiece Diameter At Full Load: 125 mmWorkpiece Diameter With 2 Vacant Positions: 250 mmTurning Speeds: 2800 RPMMax. Torque On The Boring Spindle: 1751 NmMax. Torque: 2415 NmRapid Traverse X-Axis: 15 m / minRapid Travel Y-Axis: 15 m / minRapid Traverse Z-Axis: 15 m / minRapid Traverse (W-Axis): 15 m / minTable surface: 2000 x 2500 mmFurther information:The machine is currently in active production and can be inspected under power and in operation by prior arrangement.UNION PCR 150 CNC 840 D – horizontal boring and milling machine (floor ...
Ref. -No.: 10664Manufacturer: HEDELIUSYear of construction: 1998Type of control: CNCControl: Heidenhain 426Storage location: HalberstadtCountry of origin: GermanyX-Travel: 3500 / 2 x 1450 mmY-Travel: 1000 mmZ-Travel: 700 mmTool Taper: SK50 DIN 69871 Numbers Of Tools In Magazin: 30 Turning Speeds: 20 - 5000 RPMRapid Travel X/Y/Z: 30 mm / minSpindle power: 50 kWMinimum distance between spindle nose and table top: 190 mmFurther information:- NC software version: 28047629- PLC: bc80_426_3:07- Setup 286197 37The machine can be viewed while powered on by appointment.
Ref. -No.: 10668Manufacturer: HELLERYear of construction: 2011Type of control: CNCControl: Siemens 840D solution lineStorage location: HalberstadtCountry of origin: GermanyX-Travel: 1.000 mmY-Travel: 1.000 mmZ-Travel: 1.000 mmTool Taper: HSK-A100 nach DIN 69893 Numbers Of Tools In Magazin: 50 Turning Speeds: 8.000 RPMMax. Workpiece height: 1200 mmSpindle Speed: 8000 RPMMax. Torque: 822 NmFeed Speeds X/Y/Z Axis: 1-50.000 mm / minRapid Traverse: 50.000 m / minDrive Capacity - Spindle Motor: 43 kWInternal cooling: 70 barRapid Traverse: 50000 mm / minnominal voltage: 400 Vfrequency: 50 HzSpeed range - main spindle: 8000 RPMNumbers Of Pallets: 2 Size Of Pallet: 630 × 630 mmpallet change time: 13 sFurther information:Additional Equipment / Optional Features5-port media interface for workpiece clamping (60 bar hydraulic pressure)Additional 630 × 630 mm palletFast drill breakage detectionComfo ...
Ref. -No.: 10669Manufacturer: STARRAG HECKERTYear of construction: 2005Type of control: CNCControl: Siemens Sinumerik 840DStorage location: HalberstadtCountry of origin: GermanyX-Travel: 625 mmY-Travel: 650 mmZ-Travel: 650 mmMax. Tool Weight: 10 kgMax. Tool Length: 350 mmMax. Tool Diameter: 80 mmTool Taper: HSK-A63 nach DIN 69893 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 50-10.000 RPMNumbers Of Pallets: 2 Max pallet load: 400 kgSize Of Pallet: 500 x 400 mmpallet change time: 8/5 scoolant reservoir: 1100 L.Machine length: 5800 mmMachine width: 4800 mmWeight Of The Machine Ca.: 12,8 tSpindle power: 24 / 37 kWFurther information:EquipmentPallet changerChain-type tool magazine with 60 tool positionsKNOLL coolant system with fleece filterInternal and external emulsion coolingRenishaw probing systemTool breakage detection in the tool magazineChip conveyorSound shower (n ...
Ref. -No.: 10670Manufacturer: STARRAG HECKERTYear of construction: 2002Type of control: CNCControl: HEIDENHAIN TNC 426Storage location: HalberstadtCountry of origin: GermanyX-Travel: 750 mmY-Travel: 750 mmZ-Travel: 700 mmMax. Tool Weight: 10 kgMax. Tool Length: 400 mmMax. Tool Diameter: 160 mmMax. Size Of Workpiece Lxwxh: 85 mmTool Piece Magazine With: 80 Pcs./pcs.Spindle taper: HSK63 Spindle Speed: 15.000 RPMMax. Torque: 350 Nmaxes: 4 Rapid Traverse: 40 m / minInternal cooling: 50 barNumbers Of Pallets: 2 Max pallet load: 500 kgSize Of Pallet: 500 x 500 mmpallet change time: 9 sMachine width: 4000 mmMachine Height: 3300 mmWeight Of The Machine Ca.: 15 tFurther information:The machine is currently in active production and can be inspected under power and in operation by prior arrangement.
Ref. -No.: 10671Manufacturer: TOS VARNSDORFYear of construction: 1998Type of control: CNCControl: Heidenhain TNC 426 PBStorage location: HalberstadtCountry of origin: Czech RepublicFurther information:The machine is currently in active production and can be inspected under power and in operation by prior arrangement
Key data: 100 mm, 1600 mm, 1120 mm
TOS W100A - Horizontal Boring & Milling The W100A is one of the most successful models from TOS Varnsdorf and represents the last version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile and easy to operate and maintain. Ideal for individual and small series production with high reliability and comparatively low costs. - Classic construction with fixed column - Extendable working spindle - Transversely movable, rotatable work table - Integrated plan support in the headstock - Possibility of using long drill rods with support by drilling support - Hardness-guided guideways - Central lubrication - Position indicator The machine is suitable for drilling, milling, face and thread turning, as well as general machining tasks on large workpieces. Technical data Headstock: - Working spindle Ø: 100 mm - Spindle mount: IS ...
Drilling capacity 40 mm with stepless speed adjustment from 60 - 1600 rpm and with thread device
vertical machining center, year 2008, CNC MAX Control. Used machine. More info & price on IndustrialBuyer.
vertical machining center, year 2003, CNC 840 D. Used machine. More info & price on IndustrialBuyer.
