Manufacturer:
(Category: 101)
As well as vice Auction-ID: A1-50251-188
2 axles Travel X: 70mm Travel Y: 70mm Auction-ID: A1-40982-79
Loose 4th axle. Auction-ID: A1-40982-10
Tapping machine, drilling and tapping Auction-ID: A1-40982-81
incl. NC rotary table, with 9 slots, incl. the tool holders located in the tool changer as well as chip conveyor and coolant unit Attention: the machine can be transported on a standard truck.Attention: the vices visible in the photos are not included in the scope of delivery!Additional technical specifications:• nominal current: 80 A
Incl. 60-fold tool changer, NC rotary table, incl. tool holders located in the tool changer, incl. chip conveyor and coolant system.Attention: without the machine vise shown in the photos!Additional technical specifications:• nominal current: 100 A• Path measuring system resolution: 0,001 mm• Input resolution in X/Y/Z: 0.001 mm• Position tolerance in X/Y/Z: 0.010 mm• max. tool diameter with free adjacent places: 160 mm• tool length from spindle nose without tool breakage monitoring: 350 mm• with tool breakage monitoring: 315 mm• max. tool weight at automatic tool change: 10 kg• max. total tool weight in magazine: 200 kg• Distance of T-slots: 63 mm• Number of T-slots: 9/14 pcs• Center bore: 50 mm• max. rotation of the table top: 20 rpm• Feed: 3600°/min• Resolution of the measuring system: 0.001°
Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system.Attention: The machine can be transported on a standard truck!Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm
Attention: the tapping head seen in the photos is not included in the scope of delivery!Additional technical specifications:• Drilling units: three• table with one slot
Additional technical specifications:• Drilling machines: a total of six drilling machines• Vices: three vices• jaw width: 150 mm
Attention: the hydraulic clamping systems visible in the photos are not included in the scope of delivery!Attention: the machine can be transported on a standard truck!Additional technical specifications:• Year of manufacture: presumably 2006• Slots: 9 pieces• Swivel head: 360°• incl. protective enclosure
Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer!Attention: without the machine vises seen in the photos!Attention: the machine can be transported on a standard truck!
Attention: The machine can be transported on a truck up to 3000 mm wide!Additional technical specifications:• table with 5 slots• with mounted plate, plate dimensions: 900 x 550 mm• incl. vise, jaw width: 125 mm
• Drilling units: four• table with one slot• vise, jaw width: 80 mm
Spindeldrehzahl: von 220 bis 2500 U/min, Spindelaufnahme: MK 2, Motorleistung: 550 kW, Betriebsspannung: 400 V, Tischabmessungen: 200 x 200 mm
Attention: the machine can be transported on a truck up to 3000 mm wide! Incl. the tool holders located in the tool changer.Additional technical specifications:• Setup mode X/Y/Z: 20 - 2000 mm/min• Position measuring system X/Y/Z: 0.001 mm• with in total 32-tool changer (2 x 16 places)• Max. tool diameter with fully places magazine 1: 130 mm• Max. tool diameter with fully places magazine 2: 80 mm• max. tool weight at automatic tool changing: 8 kg• Max. total tool weight in magazine: 160 kg• NC rotary table built into the rigid table.• Number of T-slots: 14/H 12 mm• Aligning slot/one: 14/H 7 mm• T-slot spacing: 63 mm• Permissible load of work tables: Rotary table: 500 kg
Incl. NC rotary table, also a simple pallet changer system, incl. the SK 40 tool holders located in the changer as well as chip conveyor and coolant unit.Attention: the machine can be transported on a standard truck!Additional technical specifications:• nominal current: 80 A• Distance between clamping holes: 100 mm• Number of clamping holes: 33 mm• Center bore: 50 mm• Max. rotation of the table top: 13.6 rpm• Feed: 3600°/min
Attention: the machine can be transported on a truck up to 3000 mm width!Additional technical specifications:• Feed rate in X/Y/Z: 20 - 15,000 mm/min• Setup mode X/Y/Z: 20 - 2000 mm/min• with in total 32-station tool changer (2 x 16 places)• max. tool diameter when all slots in magazine 1 are occupied: 130 mm• max. tool diameter when all slots in magazine 2 are occupied: 80 mm• max. tool length from spindle nose: 315 mm• max. tool weight at automatic tool changing: 8 kg• max. total tool weight in magazine: 160 kg• T-slot spacing: 63 mm
REXON SB 25/16 G Column Drilling MachineManufacturerREXONModelSB 25/16 GYear1990ConditionuntestedLocation72589 Westerheim DELot167
WABROTECH DJ-16 E Magnetic Core Drilling MachineManufacturerWABROTECHModelDJ-16 EConditionuntestedLocation73529 Schwäbisch Gmünd DELot25
Maschinennummer: 00874, Betriebsspannung: 220 V, Frequenz: 50 Hz, Anschluss: 315 W, Tischdurchmesser: 250 mm
Drehzahl: von 200 - 2800 U/min, Bohrtiefe: bis 100 mm
Quick tool change, OKUMA OSP-U100M control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-16
50 € 
