Manufacturer:
(Category: 101)
Drilling depth: up to 150 mmTable dimensions: 410 x 300 mmwith two groovesTraining workshop part 2 - Lot 9 Auction-ID: A7-46763-253
Machine number: 822441 TravelX-axis: 1,020 mmTravel Y-axis: 510 mm Travel Z-axis: 600 mmControl model: HEIDENHAIN TNC 410 PASpindle speed (max.): 6,000 rpmDrive power: 13 kWSpindle holder: BT 40Number of tool positions in tool changer: 22Rapid traverse X and Y axis: 40 m/minRapid traverse Z-axis: 30 m/minWork table Length: 1,150 mm,Width: 490 mmEQUIPMENT Note: The machine vices mounted on the work table as well as the tool holders installed in the tool magazine and in the spindle, including the tool, are not included in the sales and scope of delivery. The oil mist extraction, which may be seen in the photos, is not included in the sales and scope of delivery. Reference: Zabyx - Lot 52 Auction-ID: A7-46763-340
Table dimensions: approx. 410 x 360 mm (inside) with machine vice, jaw width: approx. 125 mmwith swivelling work tableReference: Hansmann - Lot 34 Auction-ID: A7-46763-58
Serial number: EB035487Nominal speed: 2400 rpmwith a swivelling work tableTable dimensions: approx. 170 x 170 mmSpeed range: 280 - 2350 rpmReference: Hansmann - Lot 12 Auction-ID: A7-46763-48
Table dimensions: 200 x 200 mmReference: Hüpometall - Lot 20 Auction-ID: A7-46763-100
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 660 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance from table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vice shown in the photos! incl. the tool holders located in the tool changer as well as touch probe and 4th axisReference: Schönichen - ...
Machine number: 22499Boring depth: up to 180 mmSpeed: from 25 to 3000 rpmTable dimensions: 400 x 300 mmwith two groovesincl. matching workshop cabinet with matching accessories for the machineTraining workshop part 2 - Lot 7 Auction-ID: A7-46763-250
Serial number: 1537001259AOperating voltage: 400 VFrequency: 50 HzConnection: 17 kVARated current: 35 AControl: HEIDENHAIN TNC 620Spindle speed: up to 12,000 rpmMax. spindle torque: 83 NmFeed speed in X/YZ: up to 20,000 mm/minRapid traverse in X/Y/Z: 30 m/minSetup operation in X/Y/Z: 20 - 2000 mm/min TravelX-axis: 635 mmTravel Y-axis: 510 mmtravel distance Z-axis: 460 mmDisplacement measuring system X/Y/Z: 1 μPositioning uncertainty X/Y/Z: 6 μTool holder: SK 40Table dimensions: 790 x 560 mmSpindle hours read with 5 grooves: approx. 5000incl. 20-fold tool changerAttention: all tool holders located in the tool changer are included in the scope of delivery! Reference: Schönichen - Lot 47 Auction-ID: A7-46763-284
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 k Travel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y-axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D Probe Reference: Schönichen - Lot 25 Auction-ID: A7-46763-272
Machine number: 22498Drilling depth: up to 180 mmSpeed: from 2 5 to 3000 rpmTable dimensions: 400 x 300 mmwith two groovesTraining workshop part 2 - Lot 11 Auction-ID: A7-46763-251
Power Input: 2050 Wmax. Attraction: 17,000 Nno - load speed: 0 - 350 rpmCore hole diameter: 18 mmfor further data see photographed nameplateincl. chuck and core hole drillin caseReference: Schiller - Lot 15 Auction-ID: A7-46763-187
Speed: from 250 to 2000 rpmTable dimensions: 460 x 360 mmwith two groovesReference: Pieper - Lot 62 Auction-ID: A7-46763-25
Machine number: 24755Drilling depth: up to 180 mmSpeed: from 25 to 3000 rpmTable dimensions: 400 x 300 mmwith two groovesTraining workshop part 2 - Lot 6 Auction-ID: A7-46763-249
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet Auction-ID: A7-47277-7
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: CHIRON Type: FZ 08 B/W Year of Make: 2000 Machine Type: CNC Vertical Machining Center Control: Siemens Sinumerik Operating voltage: 3/N/PE 400 V Frequency: 50/60 Hz Control voltage: 230/24 V Connected load: approx. 21 kVA Rated current: approx. 35 A Configuration Double clamping system / pendulum operation 2 clamping stations NC sub-unit Peiseler AWUP 100 Automatic tool changer Cooling lubricant system Extraction system Full fairing Compact design for series production Auction-ID: A7-47277-9
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production Auction-ID: A7-47277-6
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 SC3 Year of Make: 2007 Serial Number: 1820027 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Configuration Siemens CNC control Automatic tool changer Double station / multi-sided machining Chip conveyor Cooling lubricant system Full fairing Control cabinet Auction-ID: A7-47277-2
Core drilling motor with tripods for drilling with diamond bits 1 1/4\" mounting; heavily used; Auction-ID: A7-47086-37
First vertical machining center X-axis travel: 1,500 mm reach to 2000 mm Y-axis travel: 700 mm Z-axis travel: 600 - 700 mm Table dimensions: 1,700 x 700 mm Maximum Table Load: 1,200 - 1,500 kg Spindle Mount: BT-40 Total Machine Weight: approx. 9,000 - 10,000 kg Floor Dimensions (W x D): Approx. 4,200 x 3,000mm Maximum height: 2700mm Auction-ID: A7-47195-20
MORI SEIKI MH 40 FANUC horizontal machining centre X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Pallet size: 400 x 400 mm Table Rotation (B-Axis): 360° (with minimum division 1° or 0.001°) Spindle Mount: BT-40 Spindle Speed: 6,000 rpm Tool Changer (ATC): 40 Total machine weight: approx. 9,500 - 10,500 kg Floor Dimensions (W x D): Approx. 2,300 x 4,200 mm Height 2350 mm Auction-ID: A7-47195-21
TECHNICAL DATA SHEET WINTEC MV 45 Control: Fanuc Series 18-M X-axis travel: 800 mm Y-axis travel: 450 mm Z-axis travel: 500 mm Table dimensions: 900 x 450 mm Spindle Attachment: BT 40 Spindle speed: 8,000 RPM Tool Change: ATC 20/24 Position Rapid: 24 - 30 m/min Overall dimensions: 2400 x 2200 x 2550 mm Machine weight: 4500 kg Auction-ID: A7-47195-14
JUPITER JC-1000 DATA SHEET Control: Fagor CNC8055 MC Strokes (X, Y, Z): 1000 x 500 x 500 mm Table: 1200 x 500 mm Spindle: BT 40 - 8,000 RPM Tool magazine: 24 positions Rapid: 30 m/min Overall dimensions: 2900 x 2200 x 2600 mm Machine weight: 5000 kg Scope of delivery: remote handwheel, chip tank Chip Conveyor Complete with manual CE Certificate Auction-ID: A7-47195-8
Serial number H30163, complete with chip conveyor and manuals Auction-ID: A7-47195-36
vertical machining center YANG EAGLE 600 X-axis travel: 600 mm Y-axis travel: 410 mm Z-axis travel: 450 mm Table dimensions: 700 x 400 mm Maximum Table Load: 300 - 350 kg Spindle Mount: BT-40 / ISO-40 Total machine weight: approx. 3,200 - 3,500 kg Floor Dimensions (W x D): Approx. 2,000 x 2,200 mm Maximum Height: 2,450 mm Auction-ID: A7-47195-12
With 4 and 5 axles, chip conveyor VICES and TOOLS NOT INCLUDED Auction-ID: A7-47195-37
Selca 4045 PDH control X-axis (longitudinal): 1,650 mm Y-axis (Transverse): 600 mm Z-axis (Vertical): 640 mm Distance between Spindle Nose and Table: 120 – 760 mm Fast Feed (X/Y/Z): 60 / 60 / 60 m/min Spindle Specifications (Built-in) The system uses a direct drive electrospindle to eliminate thermal drift and vibrations typical of belt drives Maximum Speed: 12,000 rpm Power (S1 100% / S6 40%): 25 kW / 35 kW Maximum torque (S1 / S6): 110 Nm / 160 Nm Tool connection: ISO 40 - DIN Cooling: Liquid circuit with dedicated heat exchanger. Permissible Weights and Loads The fixed table allows high loads to be handled without affecting the dynamics of the axes. Table dimensions: 1,800 x 600 mm Maximum load allowed: 4,000 kg (distributed) T-slots: 18 mm (100 mm wheelbase) Floor space approx. 5,225 x 3,400 mm Maximum Height: 2,760 mm Worktop height: 900 mm (from the ground) We ...
Electrospindle power 7.5 kW, rotation speed 8000 rpm 4th and 5th axis rotary table 5-axis control Stroke X=450 mm Stroke Y=350 mm Stroke Z=400 mm Auction-ID: A7-47148-2
750 € 
