sheet metal working used for sale (3,261)

IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...

BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...

used Coil-Tec Mounted Cross Shear 1000 x 1.0 with hold-down and dispenser, mobile, with connecting tabs to the workbench "Modular" Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 1000 mm Sheet thickness max. steel: 1.00 mm Weight: 120 kg Colour: anthracite grey Dimensions: 1320 x 1500 mm Coil weight: 250 kg

Key data: 3000 mm, 10 mm

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Key data: 3200 mm, 6 mm

Hydraulic swivel bending machine, hydraulic dynamic crowning, touch screen, pressure regulation of the upper beam, mot. Back gauge (1000mm), electr./hydr. Adjustment of the bending beam

open-circuit voltage: 280 - 320 VDCcurrent intensivity: 30 - 80 Aoutput voltage: 140 VDCcutting medium: Air / Nitrogen total power requirement: ca. 11,2 kWweight of the machine ca.: 40 kgdimensions of the machine ca.: 0,90 x 0,35 x 0,50 mPlasma Cutting MachineHYPERTHERM - Hypertherm Powermax 1100incl.HYPERTHERM RT 80 hand torch- Recommended cutting capacity: 22 mm- Maximum cutting capacity: 29 mm- Severing capacity: 38 mm- Gas: Air or nitrogen- Gas inlet pressure: 6.1 bar- Gas flow rate: 189 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Decoiler Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW

Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible.

sheet width: 3200 mmplate thickness: 3.0 mm STthickness at Niro-steel: 2.0 mmOpening width / upper beam: 300 mmspeed: OW 40.0 mm/secBending beam adjustment: 80.0 mmspeed: BW 90.0 Grad/secwork height max.: 900 mmcontrol: MULTIBEND 5000 back stop - adjustable: 10 - 1550 mmaccuracy +/-: 0.1 mmair pressure: 5.0 barNumber of working hours: ca. 1.000 htotal power requirement: 2x 4.0 kWvoltage: 400 Vweight: 4400 kgrange L-W-H: 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours () good condition () Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=VP6emx4HTYM! Maximum flexibility when bending cassettes, boxes and profiles! High flexibility in bending part design! High productivity and throughput! Easy to useEquipment:- motorized universal swivel bending machine RAS 73.30 high-precision mechanics with  ...

This 3-axis Bystronic BySpeed 3015 was manufactured in 2006. It features a maximum sheet size of 3000 x 1500 mm and is equipped with a powerful 4400 watt CO2 resonator. With recent upgrades including a W-axis replacement in 2025 and a blower replacement in 2023, this machine is well-maintained. The machine includes a ByTrans Extended. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 3015 machine we have for sale. Contact us for further details.

Key data: 250 t, 4100 mm

6 Axis Byvision / Laser Guards

This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine.

This 3-axis ACCURL CPL 2040 plasma cutting machine was manufactured in 2019. It features a cutting width of 2000 mm and a length of 4000 mm. It utilizes a Hypertherm Powermax 125 source, capable of cutting mild steel up to 36 mm, stainless steel up to 20 mm, and aluminum up to 18 mm. Consider the opportunity to buy this ACCURL CPL 2040 plasma cutting machine. Contact us for more information.

This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

This 3-axis LVD Phoenix FL 3015 was manufactured in 2019 and features an 8 kW IPG laser source, capable of handling sheet sizes up to 3000 × 1500 mm. It boasts a rapid positioning speed of 140 m/min and can support a maximum sheet weight of 900 kg. If you are looking to get high-quality cutting capabilities, consider the LVD Phoenix FL 3015 machine we have for sale. Contact us for more information.

This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine.

This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for sale.Contact us for more information.

Plasma cutting machine manufactured in 2021. This Hypertherm HPR170 machine features a sturdy construction capable of handling up to 100 mm material thickness and high-quality linear guides for precision. With digital, maintenance-free AC servos, it offers impressive speeds of up to 40,000 mm/min. Consider the opportunity to buy this Hypertherm HPR170 plasma cutting machine. Contact us for further details.

This 3s Finn-Power C5 + Compact Express CNC punching machine was manufactured in 2007. It features a working area of 2500 × 1250 mm and a punching force of 30 tonnes. With 20 tool stations and a maximum tool diameter of ~89 mm, it offers efficient operation. Consider the opportunity to buy this Finn-Power C5 + Compact Express CNC punching machine. Contact us for further details.

This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information.

This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details.

Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details.

This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited CO₂ laser, capable of cutting various materials with a maximum sheet size of 3000 × 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details.

This 3s TRUMPF TruLaser 3030 Fiber cutting machine was manufactured in 2014. It features a powerful 3,000 W TruDisk 3001 solid-state fiber laser, with a maximum cutting capacity for mild steel up to 20 mm. The machine offers impressive positioning speeds and a spacious working area, making it suitable for various applications. Consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber cutting machine. Contact us for further details.

This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine.

This Hesse AD-S 30175 press brake was manufactured in 2017. It features a robust 3050 x 175 TON capacity, a stroke of 265 mm, and operates on a supply voltage of 3 x 400 Volt. Weighing 10830 kg, it ensures stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the Hesse AD-S 30175 machine we have for sale. Contact us for more information.

This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information.

This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine.

This 4-axis DMG Lasertec 40 laser engraving machine was manufactured in 2009. It features a picosecond laser with an average power of 50W and a wavelength of 1064 nm. The machine offers a travel range of X=400 mm, Y=300 mm, and Z=500 mm, with maximum feed rates of 15 m/min for X and Y axes and 12 m/min for the Z axis. Consider the opportunity to buy this DMG Lasertec 40 laser engraving machine. Contact us for more information.

This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine.