used Portal Milling Machines for sale

BG-Cam Pro ATC, Year of construction 2019, Control Fagor 8055, Travel X/Y/Z 2000/1500/200 mm, Speed up to 24,000 rpm, Recording ISO 30, 8-fold carousel tool changer, tool Ø 63 mm, 8 zones vacuum table, Machine bed additionally reinforced and tempered, Pop-Up Pins, electr. Suction foot,

x-travel: 1800 mmy-travel: 800 mmz-travel: 500 mmtotal power requirement: 55 kWweight of the machine ca.: 55 tdimensions of the machine ca.: 3 x 8 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6078 Type: DIGI 1720 Producer: COMAGRAV Created: 2014 Parameters: 3D control system: PILOT TDP Operating System: Windows IoT Enterprise Table length: 1700 mm Table width: 2000 mm speed: 1150 mm/s Weight: 1170 kg Equipment: Vacuum pump Becker Z Sensor High-speed Interface 6 vacuum zones Tool holder U1 Camera Noise absorbers Electrically oscillating knife Wheel control

x-travel: 5000 mmy-travel: 3100 mmz-travel: 1200 mmControl: total power requirement: 20/27 kWweight of the machine ca.: 65 tdimensions of the machine ca.: 15x6,2x6 mStock number 1110051Machine type CNC Portal milling machineMake CORREARapid type 50Year of manufacture 2004Control type HEIDENHAINTable size (mm) 5000 x 2000 mmX out (mm) 5000 mmY-off (mm) 3100 mmZ-off (mm) 1200 mmTable load Max 15 tonSpeed (RPM) Max 18,000Tool holder HSK 63Gesamtleistung(kW) 20/27Length (mm) 15000Width (mm) 6200Height (mm) 6000Weight 65 ton Additional informationTool changer for 24 tools5-axis gesteuerd The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mmy-travel: 3300 mmz-travel: 1300 mmTable load: 50000 kgcolumn daylight: 2600 mmworkpiece height max.: 1700 mmTable dimensions: 5000x2000 mmcontrol: Heidenhain type: ITNC530 : angular milling head: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wurde überholtmachine is retofitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mmy-travel: 2500 mmz-travel: 1200 mmangular milling head: Table load: 60000 kgcolumn daylight: 2700 mmworkpiece height max.: 1700 mmTable dimensions: 5000x2250 mmcontrol: Heidenhain type: 430 : total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wurde überholtmachine is retofitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The FFZ 30/60 CNC is a gantry milling machine with a table width of 3000mm and an X-axis travel distance of +/- 6000mm Technical specifications: DIMENSIONS OF THE MACHINE Length [mm] 13 200 Width [mm] 6 000 Height [mm] 9 800 PORTAL PASSAGE Height [mm] x width [mm] 3 200 x 3 370 Distance between clamping surface and bottom edge of milling head min./max. [mm] 0000 / 2500 Workspace X-axis travel machine table [mm] +/-6000 Y-axis travel milling unit [mm] 4 100 Z-axis pestle [mm] 1 500 Cross beam adjustment [mm] 1 500 MACHINE TABLE Length [mm] 6 000 Width [mm] 3 000 MACHINE BED Total length approx.[mm] 13,000 MACHINE CONSTRUCTION Machine frame 2 stands, beams, traverse Cross beams height-adjustable Machine bed 1 Machine table L [mm] x W [mm] 6 000 x 3 000 max. workpiece weight (6400 kg / m2) [kg] 115 000 CNC Control Heidenhain 430 Tool changer, number o ...

Description: control: ,SIEMENS Sinumerik 840 D year of manufacture: ,2000 major overhaul: ,2014 travels: X-axis: ,5500 mm Y-axis: ,2600 mm Z-axis: ,1000 mm A-axis: 180° C-axis: 180° table dimensions: ,5000 x 2000 mm clearance between columns: ,2600 mm max. distance between spindle and table: ,1400 mm  , spindle speed range: 10 - 6000 rpm toolholder: ISO50 main engine power: ,29 kW  , installation dimensions: 11000 x 9000 x 4800 mm  , the machine is equipped with 2 chip receivers and an automatic tool change magazine offer does not include other machines and parts which are visible on the photos but not belong to the machine tool holders, tools and additional tables are not a part of the offer  , please also have a look at the videos of this machine z-motion: 1,000 mm, Distance spindle - table max.: 1,400 mm, x-motion:  ...

x-travel: 6000 mmy-travel: 3500 mmz-travel: 1900 mmsurface area: 6000x2500 mmcontrol: Siemens type: 840D Tool changer: 40 chip conveyor: Richter b-axis: +/- 110 °c-axis: 360° 0turning speeds: 30.000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 4500 mm Y-axis: 2500 mm Z-axis: 1000 mm Year: 1986 Voltage: 380 V Power: 80 kW Weight: 63000 kg Size: 9500x9800x6100(h) mm

Specification LM-2616 LM-3116 LM4116 X-axis travel 2600-3100 4100 Y-axis travel 1600 1600 1600 Z axis travel 800 800 800 Distance from spindle center to table surface (mm) 200-1000 200-1000 200-1000 Table dimension (mm) 2500 x 1500 3000 x 1500 4000 x 1500 Maximum table load (kgs) 9000 10000 12000 Rapid traverse (m/min) 24/24/15 24/24/15 24/24/15 Cutting feedrate (m/min) 10 10 10 Spindle speed (rpm) 6000 6000 6000 Spindle nose BT 50 BT 50 BT 50 Spindle motor (kw) 16.3 16.3 16.3 Tool changer 32 disc 32 disc 32 disc Machine dimension (mm) 8400 x 5100 x 4570 9200 x 5100 x 4570 10500 x 5100 x 45710 Machine weight (kgs) 23800 25000 28000

LK EU-1000 Traverse paths: X/Y/Z 1050/800 / 600 mm Spindle speed: 18,000 rpm with 25kW power Table dimensions 1120x600mm, 24 tools HSK-A63, BT50 express ducts X/Y/Z 40/40 / 30 m / min Control Siemens 828D, Fanuc, Mitsubishi

Description: PIETRO CARNAGHI Gantry Unimill 35CA CNC portal milling machine from 2004 series no. 4623 Please pay attention to the availability period, a reservation is possible with deposit. Working range X-axis: 10.000 mm Y-axis: 4.500 mm Z-axis: 1.500 mm W-axis (grid 200mm) 1.000mm passage between columns 3.500 mm spindle distance over table: min. 0 mm max. 2.500 mm Control Siemens Sinumerik 840D Clamping plate pallet size 10.000 x 3.000 mm max. Load 10 to/m² Working areas (partition) 2 Tooling system Tool magazine 120 places Tool holder HSK100 A Machining heads Short standard head , Extended straight head (approx. Ø 195 mm) Angled head All information regarding the machining heads can be found in the technical documentation. Main drive Drive power 52 kW Speed range 1 - 4.000 min-1 Additional equipment Internal coolant supply 50 bar Workpiece measurement Renisha ...

Description: serial number: 312049 table dimensions: 2250 x 2200 mm , with machine vice , jaw width: 150 mm , travel of the slide: approx. 3800 mm , with 12-fold tool changer , tool holder: probably SK 25 The machine is equipped with a vacuum pump and an ALFRED JÄGER high-frequency spindle. ,table surface area l x w : 2250 x 2200 mm, weight approx.: 10,000 kg, dimensions (l x w x h) approx.: 4,500 x 3,000 x 2,700 mm

Description: serial number: 311048 table dimensions: 3950 x 2600 mm tool holder: SK 20 / SK 25 (information without guarantee!) 7-fold tool changer travel of the gantry: approx. 3750 mm The machine is equipped with: vacuum pump cooling system JÄGER Attention: No guarantee for function and completeness can be given!table surface area l x w : 3950 x 2600 mm, weight approx.: 10,000 kg, dimensions (l x w x h) approx.: 4,500 x 3,300 x 210 mm

Description: SCHIESS 50 FZG 14-450 5-Axis Double-Portal Machining Center with plate field and 4.5 m Turntable suitable for vertical turning. Please pay attention to the availability period, a reservation is possible with deposit. , , Highlights 5-axis milling heads Gantries were overhauled by Dörries Scharmann Technologie ,in 2007/2009 The overhaul included among others: , - New SIEMENS Sinumerik 840D control system - New control cabinets with cable harnesses , - New drives - In addition to the existing heads, 3 new angular heads and 3 straight heads ,  ,  ,  , were purchased Working area Portal passage width max.: 5,500 mm Turning diameter in middle position max.: 5,500 mm , ,  , , ,  , , ,  , , ,  , , ,  , Face plate diameter: 4,500 mm Table load face plate: 80 t Plate field dimensions  ...

Clamping surface of the table 950x3000 mm Bed length 6000 mm Table movement 2750 mm Passage between stands 1260 mm Machine weight 34 000 kg

: 2100 mm: 2000 mm: 800 mm: 2000x1800 mm: SK 50 DIN 69781 : 4000 U/min: 20/25/26 kW: 2100 mm: 32 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3100 mm: 2300 mm: 800 mm: 3000x1500 mm: SK 50 DIN 69781 : 10.000 U/min: 24/30 kW: 1700 mm: 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial no: SF-0440 Control : Heidenhain iTNC 530 Spindle hours: 10850 Working area: Longitudinal travel (x): 3100 mm Cross travel (Y): 2000 mm Vertical travel ,(Z): 800 mm Max. Spindle speed : flat guided: 6000 rpm linear guided: 10000 rpm Spindle motor: 22 kw Max. table load: 10000 kg Tool magazin with 32 places Spindle- and spindle gear cooling system Chip conveyor Air-conditioned control cabinet Automatic central lubrication system for guide railsz-motion: 800 mm, x-motion: 3,100 mm, y-motion: 2,000 mm, control: HEIDENHAIN iTNC530, table surface area l x w : 3000x1800 mm, tool taper: ISO 50, rapid motion: 24 m/min, weight approx.: 28,000 kg, dimensions (l x w x h) approx.: 9,620 x 5,850 x 4,150 mm

x-travel: 9700 mmy-travel: 3500 mmz-travel: 640 mmw-axis: 3000 mmControl: Siemens type: 840D PL spindle diameter: 200 mmSpindle capacity: 85 Kwsurface area: 9000x2800 mmTable load: 40000 kghigh speed spindle taper ISO: 50 chip conveyor: coolant: total power requirement: kWweight of the machine ca.: 193,8 tdimensions of the machine ca.: 22,4x10,2x8,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- X: 4050 mm - Y: 2050 mm - Z: 250 mm - Clamping area: 4200 x 2150 mm - Speed range: 12 kW - 36,000 rpm - Spindle holder: HSK E40 - Control: MDSI 6.0 on XP computer - Tool changer: 10-fold - Tool diameter max.: 13 mm - Switching hours: 23589 h - Spindle On: 7736 h - Total power: 15 kW - Machine weight: 4900 kg - Space requirement (W x D x H): 6.7 x 3.12 x 2.6 m Details Tool length scanning, spindle type: Reckerth type MSPF-125/36-12/FBLP/HSK-F40, frequency converter company Berges type SWPK 400150 H12, vacuum pump company Busch type RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: company Depureco type T22/100, cooling pump: company Chilly 25-5 Accessories overhauled replacement spindle Reckerth with acceptance protocol, 10 holders with collets, 15 more collets, documentation

Clamping table 8,000 x 3,000 x 250 mm Travel X 8,000 mm Travel Y 3,500 mm Travel Z 2,500 mm A-axis 110 ± degrees C-axis 360 ± degrees Spindle holder HSK A63 Spindle speed 25,000 rpm. Spindle drive 45 kW Tool magazine 80 quantity Weight approx. 95,000 kg Equipment: - Milling head VH20-2 axes - Probe m&H - Laser tool measurement and tool breakage control system Blum - Milling head measurement Kinematic Opt. - Minimum quantity lubrication - Blowing air unit - Connection for Cold Air Gun - Workspace cover - Tool changer chain magazine 80-fold -Conveyor - Workspace cover