subcategories
(3rd category level)
Manufacturer:
(Category: 103)
x-travel: 500 mmy-travel: 200 mmz-travel: 400 mmtable surface area: 700 x 300 mmtool taper: SK 40 - S20 feed: 8 - 400 mm/ minrapid traverse: in X und Z 1200 mm / minturning speeds: 40 - 2000 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 1400 kgdimensions of the machine ca.: 1500 x 1200 x 1600 mmIncludes 2-axis digital display HeidenhainThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...
Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment.
GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Tool changer planehorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm ...
Key data: 1000 mm, 450 mm, 600 mm
Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T
Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
x-axis: 6.800 mmy-axis: 4.000 mmz-axis: 1.500 mmControl: iTNC 530 HSCI Heidenhaindistance between columns: max. 5.090 mmdistance spindle center to table: 1.825 mmMain spindle:: type: 175149A-0007 turning speed range - main spindle: max. 19.800 min/-1power capacity - main spindel: 20 kWmax. Torque: - Nmtool taper: HSK-A63 swivellable: B: +115° / -115 °rotatable: C: +/- 200 °Main spindle:: type: 178099-0005 turning speed range - main spindle: max. 10.020 min/-1power capacity - main spindel: 20 kWmax. Torque: - Nmtool taper: HSK-A100 swivellable: B: +115° / -115 °rotatable: C: +/- 200 °work table:: table surface area: 6.000 x 3.000 mmmax. table load: 50,0 theight over floor: 100 mmnumber of T-slots: 12 T-slot - width: 28H12 mmT-slot - distance: 250 mmTool-Presetter:: number of toolpositions: 62 (38+24) pos.number of toolpositions: HSK A63: 37+1 pos.number of toolpositions: HSK A1 ...
A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible.
Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement.
Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.
Heller MC16 Nr 31-43514 BJ. 2009 Spindle revolutions 1/min. 45-16000 Psbmlb Sswffd Ssaljrd SK40 Travel Distances mm X 630 Y 630 Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool diameter mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Dimensions pallets 400 x 500 Max. pallet load KG 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 73 ATL iTM400HP nr.14916 BJ.2009 Power kVA 30 Standard deburring chamber 400 / 400 mm Max. gas filling pressure 20 bar Siemens Multipanel with Windows CE operating system
Key data: 300 mm, 150 mm, 300 mm
Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG
Milling machine Deckel FP4 NC BJ 1987 Specifications •Travel: o X-axis: 560 mm o Y-axis: 500 mm o Z-axis: 410 mm • Includes tool cabinet and various tools (see photo)
x-travel: 560 mmy-travel: 300 mmz-travel: 420 mmtable-size: 1055 x 240 mmspindle taper ISO: Sk 40 spindle turning speed range: 40 - 1550 U/minquill stroke: mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,3 tdimensions: 1,6 x 1,5 x 1,85 mUniversal milling machine- Digital display- Chip guard- Coolant system- Machine light- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Milling machine from Reckermann: TYPE: DELTA1300 K X(Longitudinal)/Y(Transverse)/Z(Vertical): 1500x 500x 450 mm Tool holder DIN 2080: SK50 Works flawlessly
max. wheel diameter: 620 mmgear width: 90 mmmax. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Gradspindle taper: metr. 100 milling head speed: 28 - 56 U/minconnected load: 18 kVAControl: total power requirement: 14 kWweight of the machine ca.: 12 t2020 Retrofit with new control/electrical system)- CNC control NTC (Fanuc) (German/English)- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 525 mmz-travel: 500 mmtable surface area: 1000 x 543 mmspindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/minfeed X/Y/Z-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z axis: 18 / 18 / 15 m/mintable load: max. 350 kgcontrol: HEIDENHAIN MillPlus milling-head swivable +/-: 90 °total power requirement: 26 kVAweight of the machine ca.: 4,2 tdimensions of machine L x W x H: 2,95 x 2,1 x 2,26 mAccessories: various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 820/850 mmy-travel: 300/330 mmz-travel: 485/505 mmweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1670 x 1620 x 2500 mFurther techniscal detals please consider picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 400 mmz-travel: 320 mmtable-size: 900 x 420 mmcontrol: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/minquill stroke: ja mmtotal power requirement: 5,0 kWweight of the machine ca.: 1,45 tdimensions: 1,6 x 1,2 x 1,9 mFeatures:- Digital display- Coolant system- Milling head with quillThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8799 Type: FO-10 Producer: TOS Created: 1958 Parameters: Maximum gear diameter: 1000 mm Maximum module: 10 Machine dimensions: 3120 x 1870 x 2525 mm Machine weight: 9000 kg
A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible.
x-travel: 400 mmy-travel: 400 mmz-travel: 300 mmrapid traverse: 1,2 m/minfeed range: 5 - 500 mm/mincreep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mmtable - universal: ca. 620 x 320 mmtable vertical adjustable: 350 mmweight of the machine ca.: 1200 kgdimensions: mmMachine was used in a public facility and is in good condition.Machine can be viewed under power by prior appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible.
Dimensions (L/W/H): 1900x1250x1750 mmweight: 600 kgtotal power requirement: 6,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1250x1750 mmtotal power requirement: 6,5 kwweight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x1100x1500 mmWeight: 300 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 940x1250x1400 mmWeight: 250 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
