Manufacturer:
(Category: 102)
This 6-axis DMG MORI CLX 450 V6 was manufactured in 2021. It features a maximum turning diameter of 400 mm, X-axis travel of 276 mm, Y-axis travel of ±60 mm, and Z-axis travel of 755 mm. The machine is equipped with a 12-position VDI 40 turret and a powerful spindle with a maximum speed of 4,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CLX 450 V6 machine we have for sale. Contact us for further details.
This 3-axis DMG MORI CLX 550 V3 was manufactured in 2023. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a powerful spindle capable of 3,250 rpm and a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details.
control: FAGOR 8055 TC workpiece weight: 10.000 kghandwheel: inkl. Chip coveyor: inkl. centre height: 500 mmgreates pass round over bed: 1300 mmSwing diameter face slide: 1000 mmcentre distance: 5000 mmtravel of cross-slide: 680 mmrapid traverse x + z axis: 8 m/minbed width: 900 mmspindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpmspindle bore: 104 mmspindle diameter in front bearing: 180 mmturning speed range:: Anzahl 4 main drive: 37 kWTorque: 10.000 Nm: Sauter 300 x 300 diameter of quill: 180 mmquill stroke: 300 mmHeight: BIS ZUR FLACHFÜHRUNG 805 mmtotal power requirement: 45 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mEquipment-4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was created with ...
turning diameter: 660/275 mmturning length: 1498 mmcontrol: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mm9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Islands and pocket program ...
turning diameter: 570 mmturning length: 1000 mmcontrol: MANUALplus 620 swing diameter over face slide: 340 mmspindle bore: 93 mmspindle turning speed range: 1 - 3000 U/mintransmission ratio: 2 rapid power traverse in X-and Z direction: 7 / 10 m/minmax. workpiece weight -without tailstock: 500 kgmax. workpiece weight between centres: 1000 kgworkpiece weight in steadies max.: 1250 kgmain drive motor: (100/60% ED) 20 / 25 kWDimensions (LxWxH): 2,94 x 2,20 x 1,96 mmax. torque on the spindle: ca. 1400 Nmweight of the machine ca.: 3,4 t HEIDENHAIN MANUALplus 620 control system- Control system expansion for ICP and DIN programs, incl. thread repair Automatic 8-station SAUTER turret with driven stations, VDI shank D=30 mm,mounted in front of the turning center (limits achievable turning diameterand tailstock operations, reduces turning length) 2-speed planetary gearbox, automatic shifting Main s ...
turning diameter: 260 mmcontrol: Fanuc Oi-TC x-axis: 170 mmz-axis: 335 mm- path correction: turning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc Oi-TC12-fold revolverdriven toolsC-axischip conveyortail stockcoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 550 mmmax. Drehdurchmesser / max. turning diameter 260 mmX-Weg / X-travel 170 mmZ-Weg / Z-travel 335 mmmax. Stangendurchlass / max. bar diameter 51 mmDrehzahl / spindle speed 4500 UpM /rpmDrehzahl angetr. WKZ /speed of driven tools 5000 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesEilgang X / rapid feed X 36 m/minEilgang Z / rapid feed Z 36 m/min.Gewicht der Maschine ca. / weight ca. 3280 kgTechnische Daten, Zubehör und Beschreibung ...
: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sliding headstock CNC lathe, year 2002, CNC Tsugami-Mori MSC-501. Used machine. More info & price on IndustrialBuyer.
Key data: 370 mm, 665 mm
cpl. Workstation with NTX 1000 turning-milling center, UNO Microset tool presetter, Solidworks/ Solidcam programming station (with 4-axis post-processor) and tools NTX 1000 Bj 2011 (CTX alpha 450 TC) new controller 2016/17, total switch-on hours since 2011 = 7600 hrs, total spindle hours 3600 hrs CNC control: Siemens 840D with control extension by 2nd control channel Turning length mm: 665 Max. turning diameter mm: ø Ø370 Turning-milling spindle: Travel X-axis mm: 380 Y-axis travel mm: ±105 Travel of Z-axis mm: 450 direct travel system B-axis degree: ±120 (0,001º) Spindle speed: 20,000 Drive power kW: 7.5 Tool magazine Magazine slots: 38 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Turret: X-axis travel mm: 160 Travel of the Z-axis mm: 730 Number of tool slots pcs.: 2 x 12 Main spindle: Spindle speed: 6,0 ...
TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Version convertible long/short turning Controlled axes 9 Tool Carrier WRV Top X/Y/Z Dualdrive Sub-spindle with lower WRV, separate drive Rear unit with drive Nominal voltage 400 V, 3~, N, PE · 50 Hz Connected load 28 kVA, pre-fuse 63 A Supply cable recommended 16 mm² to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, type 3 small - Cooling lubrication with cutting oil — internal supply 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment plant with belt filter (ELBARON) - Mist extraction and smoke extractor - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Work ...
GENERAL Project No.: 906048 Quantity: 1 pcs. Manufacturer: MAIER Type: ML 26 C5-Y2 Control: Fanuc 31i B Year of Make: 2019 Condition: Used machine Approx. (hrs): 31850 Spindle Approx (hrs): 13519 Program run approx. (hrs.): 28672 DESCRIPTION TURNING Axles 7 Max. turning diameter 26 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle Passage Main Spindle 32 mm Axes on the main spindle unit C (5° indexing)/Z Workpiece spindle stroke main spindle 450 mm Max. rapid traverse speed in X/Y/Z Main spindle unit 32 m/min Partial hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 5.5/3.7 kW Spindle pass-through sub-spindle 26 mm Axes on the sub-spindle unit C (5° indexing)/Z/Y Blowing air through the sub-spindle Workpiece ejection through the sub- ...
GENERAL Project No.: 906047 Quantity: 1 pcs. Manufacturer: TORNOS Type: EvoDeco 32/10 Control: Fanuc 31i B5 plus Year of Make: 2022 Condition: Used machine Approx (hrs): 17435 Spindle Approx (Hrs): 10233 DESCRIPTION TURNING Axles 10 Max. turning diameter 32 mm Max. speed main spindle 8000 1/min Axes on the main spindle unit C/Z Workpiece spindle stroke main spindle 260 mm Max. speed sub-spindle 8000 1/min Axes on the sub-spindle unit C OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Scraper Chip Conveyor Coolant Setup Coolant temperature control Preparation for CO2 fire extinguishing system Parts Discharge Belt Precast removal device Bar Feeder/Bar Loader ROBOBAR SBF-532 "3M"" Max. rod diameter 32 (36) mm Max. rod length 3200 m ...
This 3-axis MURATA MZ60 CNC Lathe was manufactured in 2000. It features a high-speed spindle with a maximum speed of 6,000 rpm and a tool capacity of 12 tools. The X-axis travel is 125 mm, and the Z-axis travel is 120 mm. If you are looking to get high-quality turning capabilities, consider the MURATA MZ60 machine we have for sale. Contact us for further details.
KNUTH Basic Plus L&Z Lathe /Year 2011 -Tip height 150mm -Max turning diameter 300mm -Max turning diameter over support 178mm -Max. turning diameter without bridge 430mm -Tip width: 810 mm -Spindle bore: Ø 38 mm -Spindle speed: 60–1,550 rpm, 9 steps -Automatic longitudinal/plane feeds -Spindle mount: Camlock D1-4" -Tailstock cone: MK 3 -Quill stroke: 100 mm -Bed width: 180 mm -3-axis digital display -Multifix quick-change holder with insert -Electric lining protection -Work light -Rotating center punch tip -3-jaw chuck -2x bezels -Documentation Dimensions: LxWxH 1.6x0.7x1.2 meters / Weight 520Kg
Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm / Stepless speed adjustment -Coolant pump -Lining protection -Three-jaw chuck -Quick-change holder Multifix & insert -Documentation Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg
This 4-axis SPINNER TC800 110MCY was manufactured in 2016. It features a Siemens control system, operating at a voltage of 400 V and a frequency of 50/60 Hz. The machine has a full-load current of 63 A and a nominal current of 80 A. If you are looking to get high-quality turn-milling capabilities, consider the SPINNER TC800 110MCY machine we have for sale. Contact us for further details.
This 3-axis Murata MW100 Horizontal Twin-Spindle CNC Turning Center was manufactured in 2012. It features a maximum spindle speed of 4,500 rpm and a tool capacity of 2 × 8 positions. With a compact design and included chip conveyor, this machine is ideal for efficient turning applications. If you are looking to get high-quality turning capabilities, consider the Murata MW100 machine we have for sale. Contact us for further details.
turning diameter: 320 mmturning length: 305 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 4000 mmturning diameter over slide rest: 3500 mmturning length: 30000 mmcentre height: 2000 mmworkpiece weight: 160 tbed width: - mmbed height over floor: - spindle turning speed range: 0,5 - 80 U/minmain drive motor: - kWfaceplate diameter: - mmControl: Siemens 840D total power requirement: - kVAweight of the machine ca.: 160 t2006 modernized/Overhauled and equipped with:- 4-guides bedway- CNC Control Siemens 840D- Face Plate- Counter StayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 385 mmmax. turning diameter: 620 mmturning length: 958 mmcontrol: MSD 501 II Mori Seikigreates pass round over bed: 710 mmSwing dia. over traverse guideway: 738 mmcentre distance: 1.125 mmMain spindle:: turning speed range - main spindle: 10 - 1.600 min/-1power capacity - main spindel: 30 / 22 kWspindle bearing diameter: 180 mmspindle bore: 130 mmspindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mmz-axis: 995 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 60 mmturret change time: 0,4 sec.Tailstock:: tailstock adjustment: 850 mmdia. of quill: 110 mmtaper of center: MK 5 quill stroke: 150 mmfeeds:: rapid traverse: X: 20 / Z: 24 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 64 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,0 x 2,5 x 2,5 mDocuments: Chip conveyor: Tail ...
turning diameter: 620 mmturning length: 2000 mmcontrol: MSX 501 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HAAS ST-10 CNC turning center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine is designed for the production of precision parts used in various industries. It enables the efficient turning of workpieces with a maximum diameter of 305 mm and a length of 406 mm. Machining is performed using a spindle with a maximum rotational speed of 6000 rpm. The HAAS ST-10 works in two axes, X and Z, with feeds of 200 mm and 406 mm respectively. The turret allows for the use of different tools during machining and enables their rapid exchange. All this is complemented by a compact, highly rigid design. The ST-10 CNC lathe is operated using an intuitive HAAS CNC controller with access to numerous advanced functions. The machine is also equipped with a measuring probe and a chip conveyor designed to automatically remove chips from the work area. The total weight of the ma ...
A center lathe with 2-axis digital readout is offered. Tool holder, coolant supply and transparent guard. Inspection possible by prior arrangement.
A CNC lathe is offered. Equipped with three-jaw chuck, tool turret and hydraulic unit. Control: TRAUB SYSTEM TX 8. Inspection possible by prior arrangement.
A lathe with CNC control is offered. Equipped with three-jaw chuck, tailstock, tool holder, cutting fluid supply and machine enclosure. Control: HEIDENHAIN. Inspection possible by prior arrangement.
