Manufacturer:
(Category: 102)
This 4-axis DMG MORI CLX 450 V4 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control and includes a turret with 12 stations, all with driven tools. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC turning center we have for sale. Contact us for further details.
This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 Ã 1600 Ã 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us.
This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details.
turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/minspindle: 1 kWgripping station: 42 mmturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders (see picture)5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 4 ...
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck- ...
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck ...
turning diameter: 450 mmturning length: 380 mmcontrol: Seicos 40L Multi max. machining diameter: 340 mmBar feed: 51 mmturning speed range - spindle: 30 ~ 5.000 U/mindrive capacity - spindle motor: 11 / 7,5 kWspindle nose: A2-6 spindle bore: 59 mmbearing diameter: 100 mmtravel -x axis: 215 mmtravel -z axis: 400 mmturret (x-stations): 16 feed: 0,001 ~ 500 mm/minrapid traverse: X/Z: 30 m/minShank diameter: 25 x 25 mmDrill shank diameter: 40 mmtail stock: taper of center: MK 5 tailstock adjustment: 300 mmtotal power requirement: 23 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,5 x 2,8 x 2,2 mDocuments: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC LatheHITACHI SEIKI - HiTec-Turn HT 20 RIIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.
Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindle nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMai ...
Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...
The machine is in good technical condition, testing is possible after prior agreement. The machine is offered without a divider.
Key data: 5000 mm, 17000 mm, 4000 mm
5-axis CNC Turning and Milling - Year of manufacture: 1970 (modernization: 1984, 2006 and 2015) - Control system: Siemens 840D - Table diameter: 5000 mm - Maximum turning diameter: 17,000 mm - Maximum working height: 4000 mm - Milling length: 8500 mm (movable table) - Table speed (max): 40 rpm (100 kW) - Maximum table load: 100 tons Accessories: - Milling head (800 rpm / 60 kW) - Universal milling head (630 rpm) - Front slider for diameters up to 1000 mm - Grinding equipment - Angle head 90 degrees (630 rpm) - Small 90-degree angle head (450 rpm) - Multiple tools.
Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.
Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.
Horizontal turning machine manufactured in 2006. This Johnford SL60 features a swing over bed of 580 mm and a spindle bore of 76.5 mm. It is equipped with a 12-station tool turret and a high-torque spindle motor capable of speeds up to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the Johnford SL60 machine we have for sale. Contact us for further details.
This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a bar capacity of 52 mm. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details.
swing diameter: 2200 mmcentre distance: 9500 mmturning diameter over bed: . mmturning diameter over slide rest: . mmturning length: . mmworkpiece weight: 70 tturning speeds: . U/min4-jaw-chuck diameter: 2100 mmcontrol: Siemens type: Sinumerik 850 T mmtransmission ratio: . total power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: mSingle CarriageTailstockHydrostatic BedChip ConveyorSerial Number: 27486The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on o ...
This 7-axis TRAUB TNC 65 DGY was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DGY horizontal turning machine we have for sale. Contact us for further details.
Multi-spindle turning machine manufactured in 1992. This Mazak Quick Turn 18 NSP features a maximum turning diameter of 260 mm and a turning length of 500 mm. It includes a tool turret with 8-fold / 16 positions and a spindle speed range of 36 - 3,600 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 18 NSP machine we have for sale. Contact us for further details regarding this machine.
Horizontal turning machine manufactured in 2022. This Feeler FTC 350 LMC features a maximum turning diameter of 235 mm and a turning length of 600 mm. It includes a rapid traverse of 30 m/min in both X and Z axes, along with a spindle speed of 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Feeler FTC 350 LMC machine we have for sale. Contact us for further details.
Parallel Lathe COLCHESTER type MASTIFF 1400 Between points: 2000 mm Maxi Ø on bench: Ø 535 mm Maxi Ø over saddle: Ø 380 mm Maxi diameter in brocken bed: Ø 815 mm Spindle diameter: Ø 90 mm Spindle speed: from 18 to 1400 RPM 3-jaws chuck Ø 310 mm Year of construction: 1985 Threadings: Metric + Whitworth 3 points Fixed Steady Tailstock: CM5 Scale: 2 axes NEWALL Square turret GOODSHAPE Accessories: 3 tool holders + few sets of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3600 x 1500 x 1700 mm Weight: approx 3 T
CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of Make: 2007 Internal machine no. 60 Travels: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360° W-axis: 1,550 mm Max. turning diameter: 710 mm Mount: HSK 63 Total tool stations: 40 locations Spindle speed: 38 – 3,800 rpm Equipment / Accessories - Chip conveyors - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper tape filter system 500l - One Touch IGF
MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 â 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...
This 3-axis HAAS SL-30 was manufactured in 2001. A robust horizontal turning machine featuring a 3400 rpm spindle, Ã76mm bore, and a 10 chuck. It includes a tailstock, 12 x VDI40 tool stations, a toolsetter, and a conveyor. If you are looking to get high-quality turning capabilities consider the HAAS SL-30 machine we have for sale. Contact us for more information.
This MNT 430 horizontal turning machine was manufactured in 2005. It features a maximum turning diameter and swing of 460 mm, with a turning length up to 1000 mm. Equipped with a Siemens SINUMERIK CNC control, it supports various systems for precise operations. The spindle speed can reach up to 3000 rpm, powered by a 22 kW motor. Contact us for more information about this machine.
This 4-axis DMG Gildemeister SPEED 32/10 linear was manufactured in 2008. It features a CNC Fanuc 310iS control, a main spindle with a bar capacity of 33 mm, and a maximum speed of 8,000 rpm. The machine offers robust multitasking capabilities with a total of 16 driven tool stations and a turret for efficient processing. If you are looking to get high-quality turning capabilities, consider the DMG Gildemeister SPEED 32/10 machine we have for sale. Contact us for more information.
This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine.
This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine.
greates pass round over bed: 640 mmswing diameter over face slide: 435 mmcontrol: Siemens SINUMERIK 810D pl turning speed range: 3 - 2.500 U/mincentre distance: 1.500 mmspindle bore: 70 mmspindle diameter in front bearing: 100 mmLathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 tiThe machine is in good condition and can be inspected under power at any time.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DUS630ti | DUS 630ti | DUS 630 tiThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 480 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: - mmturning speeds: 90 - 1120 U/mincentre height: 240 mmspindle bore: 52 mmtotal power requirement: 7,5 KWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 3,0 x 1,3 x 1,5 mEngine Lathe- 3-jaw chuck (200 mm)- Quick-change tool post- Steady rest- Machine lamp- Chip tray- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
