Manufacturer:
(Category: 104)
grinding length: 600 mmgrinding width: 400 mmworkpiece height: 500 mmtotal power requirement: 10 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center height: 150mm, max. grinding diameter: 300mm, distance between centers: 620mm, max. workpiece weight: 120kg, grinding head spindle swivel range: +45°/-15°, table adjustment: +/-8.5°, travel X/Z: 160mm/756mm, grinding wheel dimensions X/Y/Z: 400mm/63mm/127mm, grinding wheel speed: 45m/s, workpiece spindle speed: 700rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1850mm, weight: approx. 3000kg. Including LTA extraction system and SBS wheel balancing device. The workpiece drive is disassembled and its completeness is unknown. Documentation available. An on-site inspection is possible.
Tripet TST201CNC nr 3520.17.137 BJ.1987
Key data: 600 mm, 375 mm
ELB Optimal 6375 SPS, year of construction 1995, grinding area 600 x 375 mm, the machine has been overhauled by us currently, the guide tracks are scraped in tolerance of a new machine, the bearings of the grinding spindle have been changed, accessories: Electric Perm magnetic clamping plate 600 x 350 mm, automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter. The machine is functionally tested and can be viewed at our premises under power, we are also happy to take over the installation and training on site, as well as the service in the future
grinding wheel dia. x width: ca. 200 x 25 mmmagnetic clamping plate: ca. 450 x 170 mmcross feed of the table: 200 mmrevolutions of grinding spindle: 3000 U/mingrinding wheel hole diameter: 51 mmweight: ca. 1300 kg: 0,001 - 0,013 mmgrinding length: 600 mmSurface grinding machineIncludes extractor1 additional grinding wheel holderMachine was in occasional use until recentlyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 1000 mmgrinding width: 750 mmworkpiece height: 700 mmControl: SIEMENS, SIMATIC S 7-1500 table surface area: 1050 x 640 mmtable height over floor: 1000 mmtable speeds: 3.000 - 30.000 mm/mincross feed of table continual: 5 - 5.000 mm/mincross feed of table intermittent: 0,1 - 65,0 mmvertical adjustment, 1 graduation: 0,002 mmrapid traverse vertical: 0,25 m/mingrinding spindle speed: 50 - 2.500 U/mingrinding wheel size: ø 400 x 50 x ø 127 mmworkpiece weight: max. 1.000 kgtable load: max. 1600 kgtotal power requirement: 33,2 kWweight of the machine ca.: 9,3 tdimensions of machine L x W x H: 4,50 x 2,37 x 2,65 m- complete electronic / electric renewed in 2018Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...
dia. of draw-in collets: 4 - 24 mmmax. radius to grind: 12 mmgrinding range: 4 - 24 mmgrinding wheel-diameter: 100 mmtotal power requirement: 0,4 kWweight of the machine ca.: 100 kgdimensions of the machine ca.: 1 x 0,6 x 0,4 mFunction: ready for operation: Electric 380 Volt: Base with drawer: Diverse collets: Draw-off device: Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1250 mmtank diameter / tank height: 1000 / 350 mmturning speed range: 920 / 1415 U/minvoltage: 380 Vvolumn: 125 Literpower requirement: 1,9 kWweight of the machine ca.: 600 kgdimensions: 1,4 x 0,9 x 1,5 mComplete vibratory finishing system with conveyor unitSee imagesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1500 mmtank diameter / tank height: 1500 / 500 mmturning speed range: 1500 U/minvoltage: 380 Vpower requirement: 18 kWvolumn: 300 Literweight of the machine ca.: 1,2 tdimensions: 1,5 x 1,6 x 1,6 mVibration dryerSee picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: mmgrinding width: mmworkpiece weight: kgworkpiece height: mmtotal power requirement: 22 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mQ U O T A T I O NWe are pleased to offer you ex our stock, subject to prior sale, and error in technical data :DISKUSDouble Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cyclemodel DDS 600 RAMyear 1972 / 2002 modernized Serial no 6967 _____________________________________________________________Grinding wheels Ø, each 600 mmGrinding wheels bore x height, approx. 75 / 150 mmGrinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s)Grinding spindle drive, each 30 kWWorkpiece dimensions:Grinding width (or workpiece diameter) approx. 20 - 120 mmGrinding (workpiece) height max ...
grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 260 mmgrinding wheel dia. x width: 500x80 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding dimensions X/Y/Z: 500mm/300mm/350mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76.2mm, magnetic table dimensions X/Y: 500mm/200mm, pole pitch: 5mm, machine dimensions X/Y/Z: approx. 3050mm/1600mm/2400mm, weight: approx. 3000kg. Including coolant system, paper band filter, sine table, digital display, and grinding wheel flange. Documentation available. An on-site inspection is possible.
Table dimensions X/Y: 400mm/800mm, max. workpiece height: 300mm, grinding wheel diameter: 300mm-350mm, weight: approx. 2000kg. An on-site inspection is possible.
grinding length: 6000 mmgrinding width: 2200 mmworkpiece height: 2000 mmcolumn daylight: mmtable surface area: 6000 x 2200 mmtable speed -stepless-: 2 - 50 m/minworkpiece weight: 15 tadjustment speed of cross-rail: 560 mm/mingrind. wheel dimensions for face grinding: 63...200 mmgrind. wheel dimensions for peripheral grind.: 315x50x76 mmgrind. wheel dimensions for peripheral grind.: 400x40x127 mmadjustment range - horizontal: 500 mmswival range +/-: 60 °total power requirement: 86 kWtotal wight: 130 tdimensions of the machine ca.: 22x7x4 mweight of the machine ca.: 56 t- Digital Read OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 7500 mmgrinding width: 1400 mmworkpiece height: 1700 mmcolumn daylight: 1850 mmtable surface area: 7705 x 1250 mmworkpiece weight: 15 ttable speed -stepless-: - m/mingrinding motor: - kWturning speeds: - U/mintotal power requirement: - kWweight of the machine ca.: 72 tdimensions of the machine ca.: - mMachine is equipped with:- Double grinding head-- Grinding wheel on the right and left of the main spindle-- Each side can be swivelled through 90°-- Thanks to the special grinding head, there is no need to change or profile the grinding wheel when prism or V-groove grinding- Separate underhand grinding support- Automatic grinding wheel dressingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
the machine can lap and polish. There are a lot of accessories, including 3 lapping discs, various polishing felts, many masks for samples, many fluids, etc.
Subject to prior sale - errors possible Internal reference number: D-1143-6
Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate sp ...
max. grinding diameter: 200 mmgrinding length: 450 mmworkpiece length: / mmworkpiece height: 220 mmtotal power requirement: 1,14 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,7 x 1,6 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 400 mm, 200 mm
Ziersch & Baltrusch FS 2040 - Surface Grinding Machine - Magnetic clamping plate 400 x 175 mm -Hydraulic - Coolant device -Bandpass filter - Automatic transverse stroke not functional - Year of construction 1988 Specifications - Grinding area: 400 x 200 mm - Height adjustment: 410 mm - Magnetic table: 400 x 175 mm - Grinding wheels: 200 x 25 x 51 mm - Grinding wheel speed: 1420 / 2840 rpm - Motor power: 1.5 kW - Dimensions WxHxD: 1700 x 2100 x 1500 mm - Weight: approx. 1100 kg
Wampfler GS 21-05/1812/04ML/LT Slip Ring Assembly GS 21 Technical details: • Manufacturer: Wampfler • Type: GS 21-05/1812/04ML/LT • Year of construction: 2003 • Degree of protection: IP54 • Version: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Use: Slip ring assemblies for the safe transmission of energy and signals in rotating applications, including in: •Cranes • Lifting and conveying technology •Wind turbines •Mechanical engineering Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
4-position tool grinding machine Fabr. SOLID Type DS 3 CD incl. cooling device and base with adjustable tables Grinding wheel pre-grind C: 200 x 50 x 51 mm Table: 400 x 150 mm Grinding wheel regrinding C: 200 x 50 x 51 mm Table: 400 x 150 mm Grinding wheel lap cut diamond: 125 x 12.5 x 51 mm Table: 400 x 150 mm 1 grinding wheel: 100 x 8 x 51 mm 2 engine speeds: 1400 / 2800 rpm. Drive power: 0.6 kW Dimensions L x W x H/: 1120 x 1000 x 1300 mm Weight: approx. 330 kg
Control: Siemens 840 Dweight of the machine ca.: 13,5 tdimensions of the machine ca.: 7m x 4m x 2,75m mAccessories:Coolant tankGrinding wheelsVarious spare partsOperating and maintenance instructionsCE conformityDimensions: 7x4x2.75 m ( LxWxH)TECHNICAL DATA:Workpiece data:max. outer diameter: 250 mmwith max. grinding wheels Ø 450 mmmax. diameter to be machined over table: 375 mmProfile depth for dressable grinding wheels: 40 mmmax. workpiece length: 3,600 mmmax. distance between centers (1): 2,800 mmmax. bevel angle: +/- 90°Number of teeth of the workpiece: 1 - 999max. weight of the workpiece: 250 kgWorking area:Center distance between workpiece and tool spindle: 355-170 mmRadial travel: 185 mmAxial travel: 3,000 mmSwivel angle: +/- 90°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1000 mmgrinding length: 8000 mmswing diameter: 1200 mmcentre height: 600 mmmax. workpiece weight between centres: 10000 kgworkpiece weight max.: 20000 kgworkpiece turning speeds: 5 - 60 U/mingrinding slide speed stepless: 22 - 2240 mm/minrapid travel - grinding head longitudinal: 3500 mm/minturning speed range - grinding spindle: 450 - 1610 U/mingrinding wheel size: 425 /710 x 63 x 305 mmtailstock adjustment: max. 6000 mmworkpiece-drive: 20 kWgrinding motor: 30 kWcrowning with reference to bobbin radius: 0,01 - 1,5 mmtotal power requirement: 85 kWweight of the machine ca.: 35,4 tdimensions of the machine ca.: 13,1 x 3,3 x 2,35 mRoller grinding machine with movable grinding spindle carriage- Hollow and crown grinding device- Telescopic covers- Coolant system- Position tolerance 0.005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0600 mm: 300 mm: 382 mm: 700x340 mm: 355x38x127 mm: 1500 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0600 mm: 300 mm: 382 mm: 700x340 mm: 355x38x127 mm: 2400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A centerless round and polishing belt grinding machine Loeser (RPS 376/2+2), retrofitted in 2024, is available. Stations grinding/polishing: 2/2, grinding range: 10mm-120mm, belt dimensions X/Y: 3000mm/200mm, feed rate: 15m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.
Centerless grinding machine, ROSSI MONZA 410 Monzesi, Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation, auto plunge, overhaul - retrofit - PLC under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel ...
