Manufacturer:
(Category: 104)
grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTeilüberholte Maschine mit Messprotokoll nach NeumaschinentoleranzNEUE Steuerung Eckelmann ENCmit BEMA SchleifsoftwareKEL-ASSIST für Kelco 90numerisch gesteuerte B-AchseInnnschleifrinrichtung Dia 80mmSchleifscheibe links Durchmesser 400mmSchleifscheibe rechts Durchmesser 300mmInnenschleifspindel HJN 828hydraulischer ReitstockMikroverstellungKEL SET MesssystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.
width of the strips: 50.0 mmband length: 940 mmband speed: 3.0 - 22 m/minturning speeds: 1450 U/mintube diameter: 16.0 - 114 mmradius: 180 °total power requirement: 4.75 kWweight of the machine ca.: 265 kgrange L-W-H: 1000 x 750 x 1300 mmFurnishing:- stationary pipe belt grinders- Automatic material feed with separate drive motor- Replacement sanding belts- Stepless speed adjustment- Manual adjustment of tube tension- Polish bent pipes up to 180 (angle).- Manual work possible without feed- CE mark / declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.
internal diameter: 99999 mmgrinding depth: 99999 mmswing diameter: 99999 mmgrinding diameter: 99999 mmgrinding length: 200 mmcentre height: 175 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC internal grinding machineB-axis 4 x 90°Q-axis for adjusting tapersUsed with minor maintenance2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm1 external grinding motor spindle Fischer MFVS1407 7,000 rpm-Pneumatic power clamping device with 20mm stroke-Dressing device with 2 swivelling arms, hydraulically foldable back-Grinding detection ring sensor Dittel on the workpiece headstock-Passive grinding detection with magnetic base-Paper belt filter 375 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions X/Y: 900mm/300mm, max. grinding length: 900mm, max. grinding width: 350mm, max. table to spindle center distance: 575mm, max. table load: 670kg, max. table longitudinal movement/cross movement: 859mm/300mm, grinding spindle speed: 2800rpm, grinding wheel outer diameter min./max.: 400mm/165mm, bore diameter for 400mm: 127mm. Machine dimensions X/Y: approx. 1100mm/1100mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.
internal diameter: 80 - 900 mmgrinding depth: 500 mmswing diameter: 1.000 mmControl: SIEMENS Sinumerik 802 solution linemax. external grinding diameter Ø: 900 mmworkpiece weight: 1.000 kgfinishing spindle: : spindle taper: 60 mmpower capacity: 15 kWturning speed range - grinding wheel: 1.500 - 3.500 1/mintotal power requirement: 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,7 x 2,9 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 125 mmmodule: 4 control: SIEMENS SINUMERIK travel -x axis: 105 mmtravel -y axis: 40 mmtravel -z axis: 500 mmworkpiece diameter: 17 - 39,5 mmworkpiece height: 6 - 15 mmGear Honing Machine | GLEASON-HURTH - ZH 125The machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ZH125 | ZH-125The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC gear rack grinding machine- Automatic grinding head- B-Axis Grinding head ca 20 gr swivel- ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200)- Pendel opperation ( double table)- Dresser automatic- Table dresser
Surface Grinding Machine Aba FFK High-quality, hand-operated surface grinding machine Magnet size: 250 x 150 mm Dressing device on top of the spindle Maximum stroke in X direction: 390 mm Maximum stroke in Y-direction 180mm Height from magnet to spindle center: 395 mm Large Vernier Rings Includes 5 flanges with grinding wheels Dot diamond for magnet A dust extraction system is also available.
On offer is a used Delta LF 350 vertical cup grinder The machine is in a well-maintained and functional condition. It is ideal for precise surface and cup grinding of metal parts – perfect for workshops, maintenance or toolmaking. ⸻ Technical data (approx. information): • Model: Delta LF 350 • Type: Vertical cup grinder • Grinding range: approx. 350 × 155 mm • Grinding height: approx. 280 mm • Grinding wheel Ø: up to 200 mm • Spindle speed: approx. 2,800 rpm • Drive power: 3 kW • Connection: 400 V / 50 Hz • Weight: approx. 450 kg ⸻ Equipment: • Magnetic clamping plate • Coolant device / wet grinding device • Splash cover • Manual delivery • Grinding wheel & tools included • Documentation / instructions available ⸻ Condition: • Technically flawless, ready for immediate use • Visually well-maintained, normal ...
grinding diameter: 390 mmgrinding length: 650 mmcentre height: 200 mmworkpiece weight: max. 250 kgx-axis: 380 mmz-axis: 1150 mmsanding disc diameter: 400 mmperipheral speed: 20-50 m/secworkpiece spindle stepless: 1 - 650 U/mintailstock quill taper MT: 4 quill stroke: 45 mmdia. of quill: 50 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. work-piece diameter: 254 mm Max. distance between centers: 1066 mm Max. length of grinding: 1041 mm Max. capacity of collet chuck: 38 mm Dimensions of standard grinding wheel: 408x25x205 mm Limits of grinding head turning: 45 degrees Centre tapers: Sea #4 Thread pitch: 0.42 – 305 mm Max. pitch correction: 0,1 mm on 100 mm of length Adjustable backing-off: 0-5mm Number of rotation speeds of grinding head: 20 Range of speeds of workpiece slide: 1/3 – 60 rpm Speeds on back-run: 25.4; 80 rpm or working speed Work-piece slide motor capacity: 0.75 HP Grinding head motor capacity: 3.5/1.25 HP Max. obliquity: 1:12 Width limits of grinding wheel: 9.5–75 mm Range of grinding wheel speeds: 850–1540 rpm Internal diameters processable: 19–228 mm Max. diameter of hobs: 178 mm Max. diameter of thread chasers: 254 mm Coolant tank capacity: 136 liters Dimensions: -L ...
grinding length: 6000 mmgrinding width: 500 mmworkpiece height: 250 mmspeed of grinding head: 0,02 - 30 m/mintable width: 700 mmsegment head diameter: 630 mmgrinding motor: 110 kWgrinding wheel speeds: 1500 U/minmagnetic clamping plate: 6200 x 200 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mPrecision vertical surface grinding machineequipped with :- segment grinding head- magnetic table 6200 x 200mm - inclinable- Traction drive grinding head by direct current via toothed rack- Coolant tankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Grinding length: 600 mm Grinding width: 200 mm Clamping surface of the table: 600 x 200 mm Greatest distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically infinitely variable: 1 - 24 m/min Table transverse feed per hand rotation: 4 mm Grinding spindle speed infinitely variable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Approx. space requirement: 3100 x 1700 x 1900 mm
grinding length: 160 x 400 mmmechanical: ja weight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technische specificatiesIngangsvermogen1,5 / 2,4 kWSnelheid1000 + 1500 toeren per minuut WerkstukgegevensMaterialenstaal, roestvrij staal, aluminium, non-ferrometalenDwarsdoorsneden20 x 20 tot 120 x 120 mm20 x 20 tot 150 x 150 mm10 x 10 tot 180 x 450 mmOntbraamtijdsecties 1 – 5, zware werkstukken 4 tot 12 sec.
Technical data: Manufacturer: Lee Yagn Type: LY Workpiece diameter: 1 – 25 mm Dimensions cutting wheel: 180 x 1 x 31.75 mm Grinding wheel dimensions: 100 x 50 x 20 mm Disconnect speed: 2,034 rpm. Grinding speed: 1,130 rpm. Dimensions and weight Weight: 90 kg Condition Condition: Used Functional: Tested and fully functional
width of the strips: 75 mmband length: 2000 mmband speed: 36 m/mintotal power requirement: 4 kWweight of the machine ca.: 82 kgdimensions of the machine ca.: 1000 x 500 x 1150 mmBelt sander Metallkraft MBSM 75-240-1, article no.: 3923272For sanding surfaces, edges and rounding offDescription:- Powerful motors and vibration-free operation for the best sanding results- Quick sanding belt change in seconds thanks to quick-release system- Large surface sanding area thanks to fold-away upper sanding belt cover- Continuous sanding surface after removal of attachments enables sanding of long workpieces too- Can be used with and without extraction- One extraction nozzle on the spark box and one on the rear belt roller- Simple adjustment of the belt run via adjusting screw- Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system- Infinitely tiltable sanding unit- ...
KELLENBERGER 600U Universal Grinder Machine No. 721/441 Distance between centres 600 mm Centre height 125 mm Table orientation 11 degrees Grinding wheel for cylindrical grinding 400 x 50 x 127 mm Motor power 3 kW Spindle speed 1500 / 1700 / 2200 rpm Orientation of grinding wheel holder headstock 270degrees (3 x 90) Grinding wheel speeds 3600 rpm Boring for internal spindle 70 mm Workhead swivel 360 degrees Workhead speeds 20 - 400 rpm Wheelhead motor power : 3 kW Workhead head motor power : 0,9 kW Dimensions 2580 x 1680 x 1670 mm Weight 2200 kg
Very good surface grinding machine Table surface / working area 200 x 600 mm
grinding length: 600 mmgrinding width: 350 mmworkpiece height: mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pipe grinding machine - self-made - Pipe grinding machine with CE marking - Suitable for grinding or surface pretreatment of various pipes - was used for galvanized steel pipes as a surface pre-treatment before painting - could be converted for other materials (other abrasive belts + possibly adjustments in the feeding system) - Control: Mitsubishi - Automatic feeding and ejection from the machine - Several pipes can be fed and ground one after the other and temporarily stored during ejection - Pipes are picked up by gripper and guided through the machine to the ejection - Incl. RL125 field extraction system for extracting the grinding dust - Compressed air is required for the function - Machine is sold without safety device - Year of construction 2011 Specifications - Min. tube diameter: 76 mm - Max. pipe diameter: 200 mm - Min. tube length: 3600 mm - Max. tube le ...
Control: Xpress Cube Grinding width: 600 mm Grinding length: 1,500 mm Grinding height: 500 mm Grinding wheel diameter: 400 mm Table load: 1,200 / 625 kg Spindle drive: 10 – 52 kW Spindle cone: 60 / 75 mm Speed range: 1,450 – 3,500 rpm Accessories: Belt filter system Coolant Mist Extraction Type VMN-V12 Balancing system Magnetic disk
