Manufacturer:
(Category: 101)
Attention: the machine can be transported on a truck up to 3000 mm wide! Incl. the tool holders located in the tool changer.Additional technical specifications:• Setup mode X/Y/Z: 20 - 2000 mm/min• Position measuring system X/Y/Z: 0.001 mm• with in total 32-tool changer (2 x 16 places)• Max. tool diameter with fully places magazine 1: 130 mm• Max. tool diameter with fully places magazine 2: 80 mm• max. tool weight at automatic tool changing: 8 kg• Max. total tool weight in magazine: 160 kg• NC rotary table built into the rigid table.• Number of T-slots: 14/H 12 mm• Aligning slot/one: 14/H 7 mm• T-slot spacing: 63 mm• Permissible load of work tables: Rotary table: 500 kg
Incl. NC rotary table, also a simple pallet changer system, incl. the SK 40 tool holders located in the changer as well as chip conveyor and coolant unit.Attention: the machine can be transported on a standard truck!Additional technical specifications:• nominal current: 80 A• Distance between clamping holes: 100 mm• Number of clamping holes: 33 mm• Center bore: 50 mm• Max. rotation of the table top: 13.6 rpm• Feed: 3600°/min
Attention: the machine can be transported on a truck up to 3000 mm width!Additional technical specifications:• Feed rate in X/Y/Z: 20 - 15,000 mm/min• Setup mode X/Y/Z: 20 - 2000 mm/min• with in total 32-station tool changer (2 x 16 places)• max. tool diameter when all slots in magazine 1 are occupied: 130 mm• max. tool diameter when all slots in magazine 2 are occupied: 80 mm• max. tool length from spindle nose: 315 mm• max. tool weight at automatic tool changing: 8 kg• max. total tool weight in magazine: 160 kg• T-slot spacing: 63 mm
REXON SB 25/16 G Column Drilling MachineManufacturerREXONModelSB 25/16 GYear1990ConditionuntestedLocation72589 Westerheim DELot167
WABROTECH DJ-16 E Magnetic Core Drilling MachineManufacturerWABROTECHModelDJ-16 EConditionuntestedLocation73529 Schwäbisch Gmünd DELot25
Maschinennummer: 00874, Betriebsspannung: 220 V, Frequenz: 50 Hz, Anschluss: 315 W, Tischdurchmesser: 250 mm
Drehzahl: von 200 - 2800 U/min, Bohrtiefe: bis 100 mm
Quick tool change, OKUMA OSP-U100M control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-16
With double pallet, HEIDENHAIN control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-15
Fast tool change, FANUC Series Oi-MC control Excluding machining supports, magnetic tables and tools AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-17
With double pallet, Mori Seiki M730BM control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-7
MITSUBISHI Control Excluding machining and tooling supports AVAILABILITY END OF OCTOBER 2026 Auction-ID: A7-50204-12
MITSUBISHI Control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-11
With double pallet, FANUC Series 18i-MB control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-10
Used, functional. MK4 recording. Automatic feeding. Table adjustment. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-14
Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA Pallet System MTS500, Tool Breakage Detection, Coolant System, Coolant through the spindle (23 l/min at 40bar), chip conveyor, electronic handwheel Auction-ID: A7-50158-12
Used, untested. MK4 recording. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-11
Chip conveyor available Auction-ID: A7-50158-1
Dismantling and collection mandatory in week 48 (23.11.-27.11--26), without machine pallets 800 x 1000 mm, pallets can be purchased from Heckert. Technical details and layout see appendix, number of tools 240, max tool diameter. 250. max tool length 800 mm, Knoll cooling system and chip conveyor. An inspection under chip can be made by arrangement. The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself. Dismantling of the system mandatory in week 49/26 Auction-ID: A1-50085-167
Horizontal machining center with control SIEMENS SIN840D (PCU50); Chip conveyor, gravity belt filter system, IKZ 40bar at 23 l/min; Auction-ID: A7-50158-8
Machine type: Vertical machining center Control: Heidenhain, Table load: 500 kg Tool magazine: 24 places The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself. Auction-ID: A1-50085-3
5-axis high-speed machining center with control SIEMENS SINUMERIK840D, high-frequency spindle RECKERTH, 8 carrier units, each with a pneumatically operated clamping device, arranged in the Y direction and in the X direction over one positioning axis can be programmatically adjusted. Tool measurement BLUM. Machine can be viewed under power. Auction-ID: A7-50158-11
Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements Chip conveyor Coolant / belt filter system Interlit SPB 3/600 Auction-ID: A7-50158-13
Horizontal machining center with SIEMENS SINUMERIK 840D control; NC rotary table; Chip conveyor; Coolant system; Coolant through the spindle; Magazine with 2 cassettes of 50 slots each. Auction-ID: A7-50158-15
Chip Conveyor Scraper Belt Coolant system 3 pumps / cartridge filter High Pressure Pump Grundfoss Type CRK2-220/22 A-W-A-AUUV Auction-ID: A7-50158-5
Machine number: 01123Operating voltage: 380 VFrequency: 50 HzRated current: 14 AHours read: 5128Speed: from 12.5 to 1000 rpmTable dimensions: 1000 x 800 mmwith 7 groovesTravel X-axis: approx. 600 mmTravel Y-axis: approx. 500 mmTravel Z-axis: approx. 600 mmincl. holders, a WALTER dividing head with a four-jaw chuck, diameter: 200 mm and various clamping devices Auction-ID: A7-49089-391
9.900 € 
