Manufacturer:
(Category: 101)
spindle diameter: 150 mmx-travel: 2005 mmy-travel: 1860 mmz-axis: 1620 mmw-axis: 706 mmcontrol: Siemens 840 C SW5.1 turning speeds: 2500 U/minsurface area: 2500 x 2000 mmspindle taper ISO: 50 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSK50 tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 90 mmx-travel: 1400 mmy-travel: 900 mmz-travel: 1600 mmTable dimensions: 1200x900 mmspindle turning speed range: 25-1400 U/mintotal power requirement: 16 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mmx-travel: 2000 mmy-travel: 1700 mmControl: Fanuc spindle taper ISO: 50 z-travel: 1400 mmTable area: 1250x1500 mmTable load: 5000 kgspindle turning speed range: 35-3000 U/minTool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kWweight of the machine ca.: . tdimensions of the machine ca.: 1250 x 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1800 mmtable load: 12,5 ttable adjustment - longitudinal: 1.250 mmtable rotating: 360 Gradtable positioning: 4 x 90 °feeds - longitudinal: 0,63 - 2.000 mm/mintotal power requirement: 4 kWweight of the machine ca.: 7,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 90 mmx-travel: 2000 mmy-travel: 1250 mmz-travel: 1250 mmspindle turning speed range: 8-1600 U/minspindle stroke: 720 mmFeed: 1-2500 mm/Uweight of the machine ca.: 9,1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mmx-travel: 1600 mmy-travel: 1120 mmz-travel: 1250 mmTable dimensions: 1250 x 1250 mmtool adaptor: MT 6 spindle turning speed range: 7,1 - 1120 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mOutriggersFacing headD.R.O. AcuriteISO 50 adapterSpindle supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mmx-travel: 3000 mmy-travel: 1500 mmcontrol: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mmTable dimensions: 1200 x 1500 mmtable load: 5 tspindle turning speed range: 12 - 2300 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmControl: Heidemhain type: 426/430 spindle speed:: 18000 spindle taper: HSK 63 surface area: 1250x700 mmRotary table: 700 mmTable load: 1000 kgb-axis: Schwenkopf 0,001 °c-axis: 0-360° Rundtisch 0total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mmy-travel: 700 mmz-travel: 630 mmControl: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mmTable load: 400 kgnumber of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mFEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 90 mmx-travel: 1000 mmy-travel: 1200 mmz-travel: 1200 mmfeed movement: 710 mmspindle taper ISO: 40 turning speed range: 8 - 1600 U/mintable-size: 1120 x 1000 mmtable rotating: 360 °table load: 2,5 ttotal power requirement: 11 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 3,3 x 3 mseparate switchboard, rapid feed, some tool holders, without face plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mmthroat: 320 mmbore stroke: 135 mmthread dia.: M 20 mmspindle turning speed range: 72 - 2600 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Uspindle taper: MT 3 table surface area: 370 x 360 mmDistance spindle/table max.: 850 mmdistance spindle/base plate: 1400 mmvoltage: 400 V / 50 Hztotal power requirement: 1,0 - 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,2 x 0,7 x 2,3 m• with cooling device• threading attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 90 mmx-travel: 900 mmy-travel: 900 mmz-axis: 1200 mmw-axis: 800 mmtable surface area: 900 x 1200 mmrotation movement: 360 Gradtable load: 6,0 tturning speeds: 25 - 1400 U/minspindle taper ISO: 40 voltage: 380 V / 50 Hzdrive milling spindle: 9,2 kWtotal power requirement: 35 KVAweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 2,8 x 2,5 m• Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,• radial face slide Ø 600 mm.traverse distance: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore diameter: 620 mmspindle diameter: 130 mmbore depth: 320 mmfeed stepless: 0 - 12 mm/minturning speeds: 10 - 70 U/minvoltage: 380 V / 50 Hztotal power requirement: 4 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,0 x 1,2 x 1,3 mtransportable drilling out work, completely ready for connectiongear of drill spindle runs over LENZE planetary driveadvanced feed with LENZE direct current motor, output: 160 wattclockwise and counterclockwisewith tool holder for Ø 420 x 620 mm,tool holder for tooling equipment fabri. LENZ LPAS 3,diverse turning steelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmtable surface area: 500x400 mmcontrol: Siemens type: 840 D spindle taper ISO: 40 spindle turning speed range: 8000 U/min: type of pallet-changer: 2 Rotary table: 360 °Cooling through the spindle: barTool changer: 40 chip conveyor: total power requirement: kWweight of the machine ca.: 11,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 105 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 325 mmadjustment of cross-rail: 785 mmdistance between columns: 1600 mmdistance spindle - column min./max.: 215 / 1100 mmspindle feeds - stepless: 1 - 6000 mm/minspindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/mintable surface area: 900 x 1500 mmworkpiece weight: 2000 kgspindle drive: 5 kWtotal power requirement: KVAweight of the machine ca.: 6 tdimensions of the machine ca.: 3,3 x 3,0 x 2,8 mdimensions of the machine ca.: 3,3 x 3,0 x 2,9 m• with RENISHAW -detector OMP 40,• mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 bore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 150-2.500 UpMPower requirement: 16 Atotal power requirement: 1,5 kWOverall size: 750x450x1745 mmweight of the machine ca.: 187 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 18 mm: M 12 : M 14 : MK 2 : 225-4.300 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel total power requirement: 0,37/0,55 kWMachine height: 840 mmweight: 110 kgStandard equipment:- Main switch with motor protection switch lockable- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 900 mmy-travel: 800 mmz-travel: 970 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 12000 U/minrapid traverse: 50 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mmy-travel: 300 mmz-travel: 300 mmcontrol: Jasnac tool taper: BT30 Tools changer for 12 tools: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 160 mmx-travel: 10.000 mmy-travel: 3.000 mmControl: total power requirement: 120/63 spindel kWweight of the machine ca.: 63 tdimensions of the machine ca.: 15x3.85x7.36 mStocknumber 1210057Type of machine CNC Floortype boring machineMake WOTANType Rapid 5CBuild in 2004Type of control HEIDENHAIN iTNC 530Spindle diameter 160 mmX-stroke (mm) 10.000Y-stroke (mm) 3.800Z-stroke (mm) 700W-stroke 700 mmTool Taper Iso 50Speeds (Rpm) 1,25 - 1250Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min.Total Power (KW) 120 /spindel 83Lenght (mm) 14.500Width (mm) 3.850Height (mm) 7.360Weight 62.300 kg Additional informationcompletely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530- 4 different angular milling heads- hydrostatic spindle bearing- aerostatic guideways- coolant device- chi ...
spindle diameter: 110 mmx-travel: 4000 mmy-travel: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m Stocknumber 1210014Type of machine Floortype Boring MachineMake PEGARDType AF11Type of control ConventionalSpindle diameter 110 mmX-stroke (mm) 4000Y-stroke (mm) 2000Z-stroke (mm) 300/750Table dimensions (mm) 1200 x 1600 mmTable rotation (degrees) 360 Tool Taper Iso 50Speeds (Rpm) 4 - 1000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmarm length: 1500 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1610008Type of machine Radial drillMake MASType VO 50Admision in drilling spindle MT 5Max. drill capacity 50 mmBase dimensions 1820 x 986 mmSpeeds (Rpm) 28 - 2500Feeds (mm/R) 0,5 - 2Lenght (mm) 3250Width (mm) 1120Height (mm) 3396Weight 4550The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 160 mmx-travel: 10.000 mmy-travel: 3.000 mmControl: ICEM 402 total power requirement: kWweight of the machine ca.: 80 tdimensions of the machine ca.: mStocknumber 1210050Type of machine CNC Floortype Boring MachineMake SKODAType W 160 CNCBuild in 1974/retrofitted in 2002Type of control ICEM 402Spindle diameter 160 mmX-stroke (mm) 10.000Y-stroke (mm) 3.000Z-stroke (mm) 1600W-stroke 1250 mmSpeeds (Rpm) 1 - 1.200Feeds (mm/R) 0,5 - 8.000 mm/min.Rapid feeds 8.000 mm/minTotal Power (KW) 180 KvAWeight 80 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mmx-travel: 1200 mmy-travel: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 5,6x3,4x3,x7 mBrand: FemcoType: WBT-100SR2CNC brand: MitsubishiCNC model: Meldas C3Year of make: 1995-05Facing supportTable length: 1.440 mmTable width: 1.600 mmSpindle diameter: 100 mm øMachine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mmincl. right-angle milling head type HuronThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 160 mmx-travel: 15000 mmy-travel: 4000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210060Type of machine Floortype Boring machineMake SKODAType W160HCBuild in 1990Spindle diameter 160 mmX-stroke (mm) 15.000Y-stroke (mm) 4.000Z-stroke (mm) 1.600W-stroke 1.250Tool Taper Iso 50 Additional informationWith 3 floorplates 1880x5615 mm en 3x 1880x6400 mm3 millingheads and 1 support1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmarm length: 2000 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 5,8x4,5x3,4 mBrand: BatliboiType: BPR-50Boiler radial drilling machineCapacity: 50 mmThroat depth: 2.000 mmSpindle taper: MK5Stroke: 350 mmDrilling Spindle: 75 mm øHead in degrees adjustableSpeed min: 16 RPMSpeed max: 800 RPMClamping surface: 2.610 x 1.050 x 260 mmMachine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mmMachine weight: 6.570 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 105 mmx-travel: 1000 mmy-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: JuaristiType: MDR105 CNCCNC brand: HeidenhainCNC model: TNC145Year of make: 1983Table length: 1.000 mmTable width: 1.000 mmX: 1.000 mmY: 1.000 mmZ/W: 1.000 mmSpindle taper: ISO 50Spindle diameter: 105 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HURCO VM10 Vertical Machining Centre. Hurco WINMax Control Year of construction: 2010 Manufacturer: Hurco Model: VM10 Control: Hurco WINMAX Spindle Speed: 10000rpm Table size: 762 x 356 mm Tool change capacity: 20 Tool size: DIN40 Traverses XYZ: 560 x 356 x 457mm
FEYEN Maschinen GmbH
