sheet metal working used for sale (3,309)

sheet width: 1070 mmplate thickness: 4 mmdistance between columns: 1100 mmdiameter of upper rolls: 110 mmtotal power requirement: 5,0 KWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 0,9 x 1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 9.0 / 10,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 190 mmpre-bending capacity: 9,0 mmconnected load: 5,3 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6400 mm, 1 mm

used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036

BODOR P3015 fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. Distinguished by its use of the most advanced technology available on the market, the machine is the perfect choice for even the most intensive challenges. It enables the precise machining of sheet metal with a maximum length of 3000 mm and a width of 1500 mm by means of a stable 2 kW fibre optic beam. During the machining process, the cutting head with autofocus automatically adjusts the focal position depending on the thickness of the material. The nozzles, in turn, are automatically changed, calibrated and cleaned to ensure reliable operation throughout their service life. All this is completed by the 360° anti-collision system developed by BODOR, which predicts and detects any obstacles. The BODOR P 3015 fibre laser is also extremely easy to operate. The machine operator has an advanced nume ...

BODOR T230 tube and profile fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. The machine, which is distinguished by its use of the state-of-the-art technology available on the market, is the best choice for even the most demanding tasks in many industries. It enables precise cutting of tubes and profiles with a square cross-section by means of a stable 1 kW fibre-optic beam. During the machining process, the cutting head with auto focus function stores the focal length values in the control system separately for each type of material. The intelligent technology developed by BODOR, in turn, reduces the piercing time by 90%, regardless of the thickness and type of material. All these solutions reduce energy consumption and the amount of cutting gas to a minimum. The T230 tube laser cutting machine is also extremely easy to operate. The machine operator has an a ...

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mmFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustable stop fingers- 1x split set of deer foot tools - top- 1x split set of Multi V tools ...

Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - ...

material width: 1250 mmmaterial thickness: 12,00 mmno. of straightening rolls: 19 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmsheet length min.: 100 mmwork height max.: 900 mmspeed ca.: 2 - 20 m/min.total power requirement: 31 kWweight of the machine ca.: 16,50 tdimensions of the machine ca.: mThe straightening machine HÄMMERLE is suitable for the precision alignment of parts.The hydraulically controlled guard locking also allows good judging resultscomplex geometry.Infeed and outlet roller table inclusiveDimensions (L / W / H, approx.)Rectifying unit / frame 2300 x 3200 x 1800 mmHydraulic 1600 x 900 x 1800 mmSwitch cabinet 600 x 400 x 1900 mmTank capacity 400 lOil filling by the customerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 kNstroke length max.: 235 mm: 200x24 mmbending capacity max. - round: 60x4,0 mmtoolpiece height max.: 250 mm: 660x1250 mmwork height max.: 900 mmreturn speed: 20 mm/secworking feed: 10 mm/sectotal power requirement: 3 kWweight: 950 kgDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalEquipment:- Stamp, smallest U = 145 mm 85 °   H = 250 mm, R = 5 mm- Quick change Monomatrize 85 °   H = 250 mm, V = 63 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2005 Amada EM2510NT Excellent condition 45 stations, 4 indexing No loading system A lot of tools and spares Books

Inv. Num. : 8497 Type: HSLX 3008 Producer: HACO Created: 2016 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 8 mm Back gauge: 1000 mm Equipment: Set of knives Truck with rear handling

- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33  ...

- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) - Double reel seat Specifications: Blank diameter (max.): 700 mm Tip width : 800 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-3,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 7,000 kg

However, equipping the PNC 90-3A with three additional PNC/CNC-controlled auxiliary axes now enables a working area of approx. 900x1,100mm and thus an extremely economical production of large printed parts. - Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) - Processing unit KA (in front of the machine) - 4-fold tool changer Specifications: Blank diameter (max.): 900 mm Tip width : 1,100 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 45 kN Axis force (longitudinal) (max.): 45 kN Stroke (transverse): 305 mm Stroke (longitudinal): 650 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 300 mm Tailstock stroke: 450 mm Speeds (infinitely variable): 100-2,300 min-1 Main drive: 28 kW Hydraulic drive: 15 kW Operating voltage: 400 V Frequ ...

Workforce: 300 kN/30 t Tool height: 200 mm Stroke length: 0 - 300 mm Bending capacity with prism tool MW 125/240: 200 x 16/200 x 24 mm Bending speed: 0 - 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Footprint: 1250 x 820 x 1120 mm

Shaft Ø: 40 mm Bending Capacity: Flat bar upright at 500 mm Ø: 60 x 10 mm flat at 400 mm Ø: 100 x 15 mm square at 500 mm Ø: 35 mm L-iron leg outwards at 450 mm Ø: 50 x 50 x 6 mm L-iron leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-iron T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm electr. Connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 400 kg

Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.

Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

An old folding machine Schröder is available. Working width: 2500mm, max. material thickness: 2.5mm, upper beam stroke: 80mm, adjustment: 160mm, speed: 120°/s, working height: 850mm, weight: approx. 3500kg. A visit on site is possible.

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

A high-performance circular shear Aryma for series production of discs and rings made of sheet metal is available. Material thickness: 3mm, max. disc diameter: 150mm, max. square sheet disc diameter: 1000mm, max. octagonal disc diameter: 1250mm, cutting speed: 70m/min, cutting roller diameter: 70mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1750mm, weight: approx. 1500kg. An inspection on site is possible.

sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3050 mm: 15-1000 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 30 kWweight of the machine ca.: 14,.5 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting angle adjustment- Cutting length adjustment- Cutting length limitation (time dependent)- Sheet thickness adjustment- Back gauge with clearance function- Cutting line lighting- Side stop- 3 pcs. support consoles- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 4100 mmdistance between columns: 3700 mmcolumn arm: 415 mmstroke: max. 215 mmdayligth: 410 mmajustment speed: 200 mm/secworking feed: 10.0 mm/secreturn speed: 150 mm/secwork height max.: 1080 mmtable width: 100 mmControl: CYBELEC oil volume: 160 ltr.voltage: 400 Vpower capacity: 8.5 kWweight: 10200 kgrange L-W-H: 4800 x 1800 x 2600 mmEquipment:- BEYELER electro-hydraulic CNC press brake- CNC CYBELEC control unit DNC 1200 PS/B” High-resolution screen Clear, concise menus in the operators language Tool and product library Swiveling control panel, front right- CNC-controlled axes (Y1+Y2-X)- CNC-controlled backgauge adjustment (X-axis) 2x manually adjustable stop fingers - Manual upper tool clamping- Manual lower tool clamping- Rear safety device (safety door)- Side safety device (safety doors)- Bending tools 1x set of split upper tools (ROLLERI TOP 175.26.R0 ...

Key data: 1250 mm, 1 mm

with the following equipment: segmented with quick-clamping system Segment height: 100 mm Division of the segments: 8 x 100 mm 1 x 30/40/50/60/70 mm 1 x right corner 100 mm 1 x corner left 100 mm with engraved measurement numbers in upper and bending beam segments incl. wheels Extras: with window sill insert for the production of head edges, segment height 100mm with depth stop with T-slot rail Working length: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle (max.: 150 mm Machine number: UK 20361

pressure: tplate thickness: 5 mmsheet width: 40 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3080 mm, 6 mm

max. sheet thickness steel (450N/mm²) 6.5 mm max. cutting width 3080 mm Machine weight 5600 kg Very good, ready-to-use condition