Manufacturer:
(Category: 106)
pressure:250 ttable length:4000 mmtable width:3000 mmControls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 toPRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mmRAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kgRAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 toTOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage ...
pressure:600 tdistance between columns:3640 mmstroke:350 mmno. of strokes:11 - 44 /minDistance table/ram, max. stroke up, adjustment up:1550 mmtable surface area:3600 x 2500 mmsliding table:3600 x 2500 mmram surface:3600 x 2500 mmSide window:2200 mmram adjustment:400 mmmaterial width coil line:500 - 1950 mmMaterial thickness at 1200 mm material width:0,6 - 2,5 mmMaterial thickness at 1850 mm material width:0,6 - 2,0 mmMaterial thickness at 1950 mm material width:0,6 - 1,75 mmCoil weight:35,0 tcoil internal diameter:610 mmcoil external diameter:900 - 1900 mmno. of straightening rolls:13 straightening roll diameter:50 mmStack height:400 mmstacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mmstations:2 power requirement:112,0 + 35,0 kWWeight:390,0 tDimensions (WxDxH):7,3 x 5,1 x 15,0 mHeight above floor:9,1 mHeight below floor:5,9 mclutch-/ brake combination:pneumatic overload pr ...
pressure:800 tdistance between columns:2900 mmstroke:350 mmControls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 toPRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mmRAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /minRAM (MECHAN. PRESS):. - ram adjustment:350 mmTOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):256 ...
pressure:315 tdistance between columns:1290 mmstroke:700 mmdistance table/ram, max. stroke up, adjustment up:950 mmtable surface area:1250 x 1100 mmpressure of drawing cushion in table:125 tstroke of drawing cushion in table:300 mmdie cushion area:900 x 900 mmCapacity of ejector in ram:20 tStroke of ejector in ram:250 mmtable height over floor:800 mmram surface:1250 x 1100 mmoil volume:1200 lpower requirement:40,0 kWweight:22,0 tdimensions (WxDxH):2,6 x 1,6 x 5,2 mheight over floor:4,05 mdrawing cushion in table:hydraulic ejector in ram:hydraulic cutting impact cushioning:hydraulic
Pressure:40 tthroat:330 mmstroke:250 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:800 x 500 mmhole in the table:100 mmtable height over floor:900 mmram surface:100 mmSpeed down:406 mm/sSpeed up:393 mm/sWorking speed:14 mm/soil volume:350 lpower requirement:7,5 kWweight:4,6 tdimensions (WxDxH):1,3 x 2,3 x 3,4 mGerman Safety: permitted for manual loading:CE-sign depth stop:mechanical
pressure:40 tthroat:300 mmstroke:630 mmDistance table/ram, stroke up:900 mmTable surface area:620 x 520 mmHole in the table:150 mmtable height over floor:600 mmRam surface:150 mmPower capacity:15,0 kWWeight:4,5 tDimensions (WxDxH):1,0 x 1,9 x 3,0 mGerman Safety: permitted for manual loading:CE-sign
pressure:400 tdistance between columns:1060 mmstroke:450 mmno. of strokes:15 - 30 /mindistance table/ram, max. stroke up, adjustment up:1160 mmtable surface area:1000 x 700 mmcapacity of ejector in table:2 x 16 tejector stroke of ejector in table:125 mmDie cushion pressure in table:120 tDie cushion stroke in table:2 mmcapacity of ejector in ram:2 x 4 tstroke of ejector in ram:100 mmram surface:1000 x 700 mmcolumn travel -side:630 mmpower capacity:55,0 kWweight:50,0 tdie cushion in table:2. station
no. of strokes:150 /minimpact energy:420 kJdistance lower die block / ram gudeway:435 mmThroat:425 mmsteel forging - rectangular up to:110 mmsteel forging - diameter up to:125 mmpower requirement:22,0 kWweight of hammer:3,9 tweight of anvil:3,0 tram hammer weight:200 kgweight:6,9 tdimensions (WxDxH):1,1 x 2,3 x 2,4 m
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 199300 €: 3766.77 €: 250 to: 8 mm: 1400 mm: 800 mm: 250 mm: 23 - 220 mm: 25 - 50 1/min: 950x620 mm: 8 : 120 mm: 410 mm: 820 mm: 33 kW: 1600 mm: 2900 mm: 4250 mm: 25000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view-overload protectorPRICE FCA ITALYThe data for this ad was created ...
Pressure:080 tthroat:345 mmstroke:20 - 160 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:495 mmtable surface area:920 x 610 mmtable height over floor:800 mmHole in the table:280 mmpassage to the back:670 mmram surface:650 x 400 mmram adjustment:50 mmpower capacity:10,0 kWweight:7,7 tDimensions (WxDxH):1,5 x 2,2 x 3,15 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:hydraulic ram adjustment:motoric
pressure:1000 ttable length:4000 mmtable width:1600 mmControls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 toPRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mmRAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between ...
pressure:800 tdistance between columns:1050 mmstroke:200 mmno. of strokes:8 - 25 /mindistance table/ram, max. stroke up, adjustment up:1300 mmSide window:550 mmtable surface area:1030 x 900 mmCapacity of ejector in table:15 tStroke of ejector in table:85 mmram surface:1040 x 800 mmram adjustment:120 mmCapacity of ejector in ram:12 tejector stroke in ram :80 mmpower requirement:36,0 - 112,6 kWweight:65,0 tDimensions (WxDxH):3,0 x 3,1 x 6,07 mejector in table:hydraulic ejector in ram:hydraulic
pressure:315 tdistance between columns:2350 mmdistance table/ram, max. stroke up, adjustment up:1200 mmdistance between cutting impact cushioning:1600 mmDistance table/ram, stroke up:1200 mmstroke:800 mmtable surface area:2060 x 1260 mmtable height over floor:750 mmDie cushion pressure in table:100 tDie cushion stroke in table:400 mmdie cushion area:1250 x 1000 mmside window:780 mmram surface:2200 x 1500 mmCapacity of ejector in ram:63 tspeed down:500 mm/sspeed up:310 / 410 mm/sworking speed:20 - 73 mm/squantity of oil:3900 lpower requirement:80,0 + 45,0 kWweight:55,0 tDimensions (WxDxH):4,6 x 2,7 x 7,2 mHeight above floor:6,0 mHeight below floor:1,2 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:hydraulic cutting impact absorption:hydraulic
pressure:160 tthroat:450 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:580 mmtable surface area:1000 x 1000 mmdie cushion capacity:20 tdie cushion stroke:300 mmram surface:700 x 750 mmfeed down:400 mm/sfeed up:400 mm/stable height over floor:1350 mmdie cushion area:Ø 350 mmpower capacity:55 + 11 kWweight:19,5 tDimensions (WxDxH):1,5 x 3,5 x 4,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch depth stop:mechanisch
: neu : ca. 4 Monate ab Auftragse : Italien : 132500 €: 2504.25 €: 200 to: 500 mm: 1250x1000 mm: 600 mm: 25 mm/s: 3,5 mm/s: 7.5 kW: 1550 mm: 1300 mm: 2700 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 €: 1631.07 €: 150 to: 300 mm: 950x650 mm: 1200x750 mm: 550 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3250 mm: 8200 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to: 400 mm: 1000x680 mm: 1000x740 mm: 765 mm: 250 mm/s: 10-20 mm/s: 22 kW: 2400 mm: 1525 mm: 3900 mm: 10500 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 92000 €: 1738.8 €: 200 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 2 mm/s: 2950 mm: 2500 mm: 2600 mm: 6500 kg: horizontal verschiebbar : 2050 mm: 1450 mm: 1600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 €: 1413.72 €: 40 to: 2050 mm: Y1 / Y2 / X und R Achse : 200 mm: 1700 mm: 350 mm: 440 mm: servomotorischer Spindela : 180 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 2600 mm: 1450 mm: 2650 mm: 4400 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7700 €: 148.61 €: 100 to: fix : 900 mm: 1050 mm: 1900 mm: 850 mm: 2250 (PSS: 2400) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 100 TL: 1 speed 4 mm/s, single-hand control with lever € 7.700,00 PSS 100 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.400,00 PSS100 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.000,00 PSS 100: same as PSS 100 NC but with stroke 500 mm € 10.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 190000 €: 3591 €: 300 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 5000 mm: 2600 mm: 18000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2024 : 7319 : prompt, Zwischenverkauf v : Türkei : 6900 €: 1 : 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTION:1 pair of V-block € 540,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 31200 €: 595.92 €: 100 to: horizontal verschiebbar : 500 mm: 700 mm: 1550 mm: 25 mm/s: 2 mm/s: 2400 mm: 1200 mm: 2450 mm: 1960 kgHORIZONTAL MOVABLE CYLINDER 1.050 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 26500 €: 506.15 €: 100 to: horizontal verschiebbar : 500 mm: 700 mm: 1050 mm: 25 mm/s: 2 mm/s: 1900 mm: 1200 mm: 2450 mm: 1770 kgHORIZONTAL MOVABLE CYLINDER 600 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 25200 €: 481.32 €: 100 to: fix : 500 mm: 700 mm: 1050 mm: 25 mm/s: 2 mm/s: 1900 mm: 1200 mm: 2450 mm: 1300 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 18000 €: 345.6 €: 40 to: fix : 500 mm: 700 mm: 900 mm: 29 mm/s: 4 mm/s: 1600 mm: 1000 mm: 2350 mm: 790 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 197600 €: 3734.64 €: 400 to: 6050 mm: 3 : 365 mm: 5100 mm: 510 mm: 630 mm: hydraulisch : 120 mm/s: 8 mm/s: 100 mm/s: 750 mm: 350 mm/s: 300 mm/s: 250 mm: 1220 mm: 154 mm: 500 l: 37 kW: 7500 mm: 2110 mm: 3810 mm: 34660 kg3 axes (Y1, Y2, X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 / A / 75 ...
: gebraucht : 2000 : 070165A : prompt, Zwischenverkauf v : Italien : 27900 €: 1 : 40 to: 2.6 mm: 650 mm: 380 mm: 120 mm: 8 - 78 mm: 145 1/min: 6 : 60 mm: 40 mm: 195 mm: 297 mm: 800 mm: 3 kW: 1450 mm: 1150 mm: 2150 mm: 2200 kgTwo-hand control panel and foot pedalWork area enclosure with safety switchAdditional bolster plateCentral lubrication systemStroke counterOperating manual with CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
