Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm
Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.
Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.
CONTROLS conventional PRESS FORCES total force (nominal): 20 toSLIDE (MECHAN. PRESS) stroke adjustment: yes stroke min.: 8 mm stroke max.: 38 mm variable speed: yes stroke rate (min.): 100 /min stroke rate (max.): 1800 /minSTRIP-FEEDER feeder type: roll feeder ELECTRICAL SPECIFICATIONS total power consumption: 20 kWDIMENSIONS / WEIGHTS total weight approx.: 3600 kg
Stock ref #23588: One used Bruderer BSTA 200-41B precision high speed punching press. Year of manufacture 2002. Swiss origin. Electric drive and PC controls. Choice of operators language, currently set to English. 20 tons nominal capacity (200 kN). 8 to 51 mm variable stroke. Speed range 100-1800 SPM max. Bolster plate with standard tool loading width 410 mm. BBV 190/85 roll feed on left-hand side. Max width of strip 160 mm. Max feed length variable up to 85 mm. Feed angle 180° Power supply 380/400 Volt, 50 Hz. Weight of machine approx 3200 kgs. Oil cooler with pre-warming. Spring feet dampers.
Bruderer BSTA 25. Precision high speed punching press. Nominal capacity: 25 tons. Min./Max. number of strokes: 100/1500. Year of manufacture: 1985. Variable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with two roll feeders BBV 202/120. Max width of strip: 203 mm. Feed length variable up to 120 mm max. No retrofitting done on machine. Almost no signs of previous work, machine in mint condition. All mechanical and electrical functions tested and working. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted with spring feet dampers. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 203 mm. Slide adjustment 51 mm. Original operating instructions in German and schematics included. Press weight cca. 5000 kg.
One used brother BSTA 25UL high speed punch press. Year of manufacture 1995. Swiss origin. Under refurbishment Nominal capacity 25 tons (250 kN) Adjustable stroke 13 -38 mm. Speed range 100 to 1425 strokes per minute max. Bolster area 640 mm x 530 mm. Max tool loading width 650 mm. Fitted with roll feed BBV 190/85 on right-hand side. Max width of strip 160 mm. Feed angle 180 Front and rear safety guards. Spring dampers. Oil cooler. Power supply 400 volts, 50 Hz. Weight of press approx. 4900 kgs.
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 30 toPRESS TABLE table surface (left-right): 480 mm table surface (front-back): 428 mmSLIDE (MECHAN. PRESS) slide adjustment: 40 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 40 mm variable speed: yes stroke rate (min.): 100 /min stroke rate (max.): 600 /minTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 220 mmSTRIP-FEEDER feeder type: roll feeder feeding step min.: 20 mm feeding step max.: 100 mmELECTRICAL SPECIFICATIONS total power consumption: 4.5 kW mains voltage: 380 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1200 mm &nbs ...
PRESS DESIGN feedstock transport direction: left to right PRESS FORCES total force (nominal): 40 toSLIDE stroke: 57 mm stroke rate (max.): 1200 /minSLIDE (MECHAN. PRESS) stroke adjustment: yes stroke min.: 13 mm stroke max.: 57 mm variable speed: yes stroke rate (min.): 70 /min stroke rate (max.): 1200 /min
Max. Pressure: 500 [kN] (50 [T]). Speed range: 100 – 1200 [spm]. Year of production: 1984/2022. Fitted with roller-gripper feed unit BBV 202/120 on left-hand side. Max. strip width: 203 [mm]. Max. strip thickness: 6 [mm]. Max. feeding pitch: 120 [mm]. Feeding cycle: 180 Degrees. Strip running height from clamping plate: 60 - 140 [mm]. Adjustable stroke: 16; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 64 [mm]. Bolster (Clamping) plate dimensions: 760 x 650 [mm]. Hole in table: 310 x 90 [mm]. Bed opening: 730 x 250 [mm]. Max. Tool width clearance between columns: 770 [mm]. Max. Strip clearance width: 203 [mm]. Connected load: 28 [kW]. Power 380 [V] 50 [Hz]. Control voltage: 24 [V] [AC]. Machine dimensions: H 3040 x W 2710 x D 1820 [mm]. Weight of machine: cca. 8400 [kg]. Electrical cabinet and ...
Bruderer Automatic Precision Punching Press Type BSTA 50 (60 II). Max. Pressure: 500 kN (50 T). Speed range: 100 – 1200 spm. Year of production: 1983. Serial no.: RU-8055. Fitted with roller-gripper feed unit BBV 202/120 on right-hand side. Max. strip width: 203 mm. Max. strip thickness: 6 mm. Max. feeding pitch: 120 mm. Adjustable stroke: 16; 19; 25; 32; 38; 44; 51. Ram height adjustment: 60 mm. Max. Tool width clearance between columns: 770 mm. Max. Strip clearance width: 203 mm. Bed opening: 730 x 250 mm. Connected load: 28 kw. Mains voltage: 3 x 220 V. Freqency: 50/60 Hz. Control voltage: 24 V AC. Machine dimensons: H 3040 x W 2710 x D 1820 mm. Weight of machine: cca. 7800 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass. Fitted with Wintriss SmartPAC 2 p ...
One used Bruderer Aida-BSTA 50H high speed punch press. 50 tons (500 kN) nominal capacity. Adjustable stroke 16 to 51 mm. Speed range 100 to 1200 SPM max. Bolster area 760 mm x 650 mm. Fitted with roll feed BBV 202/120 on right-hand side. Max width of strip 200 mm. Electrical control cabinet freestanding. Spring feet dampers. Weight of machine approx 8000 kgs.
Bruderer press. Year of production: 1985 Condition: perfect The press has a soundproofing cabin and a roll feeder.
High speed press Manufacturer: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate BRUDERER press 30t Overhauled - Rebuilt by Silicon plus (2019)
Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t
Mabu VP250L Precision high speed punching press. Nominal capacity: 25 tons. Min./Max. number of strokes: 80/500. Year of manufacture: 2006. Total hours under power at 09.03.2023: Total=89.1h Variable stroke: 7-62 mm. Fitted with servo roll feeders Mabu WE32 Max width of strip: 300 mm. Feed length variable up to 9999 mm. Almost no signs of previous work, machine in mint condition. All mechanical and electrical functions tested and working. Execution: 4 supports. Front and rear safety guards. Fitted with spring feet dampers. Table dimensions: 600 x 380 mm. Original operating instructions in German and schematics included. Press weight cca. 3700 kg. More Bruderer, Mabu, Bihler and Schaal high speed presses on stock as well Ideal BAS welding machines.
Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg
High Speed Precision Press Maker Obata (Japan) Year of manufacturing - 1981 Capacity 10 t Stroke length 22 mm Speed 100-400 stroke/min price 6000 EUR
CONTROLS conventional PRESS FORCES total force (nominal): 30 toPRESS TABLE table surface (left-right): 350 mm table surface (front-back): 330 mmSLIDE (MECHAN. PRESS) stroke rate (min.): 250 /min stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS total weight approx.: 3800 kgATTACHMENTS (PRESSES) decoiler: yes strip feeder: yes feeder type: roll feeder
