subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Erodiermaschine, gebrauchtBaujahr: 1989Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at)tar-mc.com oder www.tar-mc.com
turning diameter: 580 mmturning length: 1500 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: n mmspindle passage: 20 mmturning length: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:100 kN
swing diameter:80 mmworkpiece length:450 mmweight of the machine ca.:3500 kg
table length:920 mmtable width:600 mmampere:13,2 Aweight of the machine ca.:6 tdimensions of the machine ca.:2,46 x 2,24 x 2,33 mX-axis:600 mmy-axis:400 mmZ-axis:260 mmmax. table load:1500 kgThe dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.
measuring range X-axis:150-300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmtool diameter: mmtool taper: SKcompressed air: bardimensions: mmachine weight ab.: kgclamping surface upper angle: Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer
centre height:500 mmcentre distance:2000 mmcontrol:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kWweight of the machine ca.:3300 kgdimensions of the machine ca.:2500 x 4000 x 2400 mm
Article: Rotary transfer machineManufacturer: PfiffnerType: Hydromat HB 32-45/16 CNCYob: 2013Electro-hydraulically controlled, fully automaticExtract from offer:Coolant system with chip conveyor and Knoll vacuum rotation filterHigh pressure pump 50 barSecond coolant ringWater cooler type 1600Collets type B32-45 UPControl: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice)1 bar loading magazine type IEMCA: bundle loader (yob. 2011)1 Sawing unit: Saw blade D250mm2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 322 Vertical support 26/80 with 36° angular position2 drilling head 26/80-HSK: HSK 321 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 404 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive po ...
x-travel:1120 mmy-travel:370 mmz-travel:410 mmtotal power requirement:14,5 kWweight of the machine ca.:3850 kgdimensions of the machine ca.:3,5 x 3,5 x 2,2 mTable dimensions:400 x 1600 mmspindle taper ISO:50
Manufacturer: Giovanni CucchiMachine type: Automatic short bar loading magazine for single-spindle / short turningType: DB-EVO70CDesign: Surface loading magazinediameter range: 20-70mmbar length: max. 1500 mmThe advantages of DB-EVO barfeeders at a glance:- oriented loading of the bar material possible (e.g. edge upwards)- dry running - no oil flow- significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel- very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles)- short remaining pieces, as no clamping sleeve is used- very short charging time (charging process still during machining)- solid construction- very low wear of the guide channel- external loading - therefore no stop for new bars necessary, low power consumption (start/stop function)Please, contact us for getting ...
Article: Rotary transfer machineManufacturer: PfiffnerType: Hydromat HB-32/45Yob: 2002Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
x-travel:500 mmy-travel:250 mmz-travel:325 mmtable-size:400 x 200 mmT-slots:10/ 20 mmT-slots:4 Stworkpiece height max.:300 mmtemplate table:380 x 380 mmspeeds::2500 - 20000 U/minno. of turning speeds:3 total power requirement:0,25 kWweight of the machine ca.:430 kgdimensions of the machine ca.:1000 x 1200 x 1500 mm
automatische bandzaag ronde inhoud: 360 mm Capaciteitsvierkant: 360 x 360 mm spanentransporteurDepth of throat: 360 mm Max height of workpiece: 360 mm Table travel : Manual (1) -- hydraulic (2): hydraulic Sawspeed: 20 > 80 m/min Length of band saw: 4420 x 32 x 1,1 mm Power needed: 3,7 kW Length : 2500 mm Depth : 2200 mm Height: 1600 mm Weight: 2 ton
table diameter:500 mmtotal power requirement:3 kWweight of the machine ca.:2 tdimensions of the machine ca.:2300 x 1270 x 2200 mm
groove width:1,5 , 12, 14 mmtotal power requirement:380V, 50Hz, 32A, 15 kWweight of the machine ca.:5,6 tdimensions of the machine ca.:4000 x 750 x 1300 mm
number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW
measuring range X-axis:500 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:1000 mmtool diameter: mmtool taper: SKcompressed air:4-6 bardimensions: mmachine weight ab.: kgTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.
Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories:, Total enclosure,, SK 40 or 50 workpiece carrier according to preference,, Cooling unit for dielectric,, Automatic fire extinguishing system,, Measuring probe,, SK 40 or 50 measuring mandrel depending on workpiece carrier,, Alphanumeric keyboard for data management,, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions,, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes,, Software package for profile tools, 4-path program for peripheral electrodes,, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries,, Automatic central lubricat ...
sheet width:3050 mmplate thickness:4 mmtotal power requirement:9 kWweight of the machine ca.:6 tdimensions of the machine ca.:3900 x H 1850 x T 2100 mm
grinding diameter:3 - 150 mmgrinding length:200 mmtotal power requirement:380V, 50Hz, 30 kWdimensions of the machine ca.:5 x 3 x 2,5 m
grinding diameter: 0,2 - 190 mmgrinding length:400 mmcentre height:100 mmweight of the machine ca.:1,6 tdimensions of the machine ca.:2 x 1,5 x 1,8 m
