subcategories
(3rd category level)
Manufacturer:
(Category: 109)
KUB Pentron with ASB50 connection / various diameters and lengths / for insert 506X / unused and in original packaging
ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz
turning diameter over bed:340 mmturning diameter over slide rest:190 mmturning length:700 mmspindle bore:50 mmshaving-spindle speed range:40 - 3.000 U/mindimensions of the machine ca.:2 x 1 x 1,6 mtotal power requirement:6 kWweight of the machine ca.:1,2 t
incl. welding hose and earthingwith accessories for the welding gun as shown in the picturesReference: Schiller - Lot 12
For insert drill/ diameter 50 mm holder/ reference DO50RMWD50144M/ unused and in original packaging
turning diameter over bed:570 mmturning diameter over slide rest:365 mmturning length:2.000 mmfeed per revolution:0,06 - 58/ 0,03 -28 mmspindle turning speed range:11,2 - 2.240 U/minspindle bore:62 mmspindle head:8 nach DIN 55022 total power requirement:15 kWdimensions of the machine ca.:4,5 x 1,5 x 1,4 mweight of the machine ca.:4,8 t
Pressure:175 tchamfer lenght:4100 mmdistance between columns:3600 mmcolumn arm:410 mmram stroke speed:180 mm/secreturn speed:135 mm/secworking speed:10 mm/secwork stroke:275 mmoil volume:200 ldayligth:550 mmtable height:900 mmtable width:90 mmtotal power requirement:15 kWweight of the machine ca.:12000 kgdimensions of the machine ca.:5100 x 2150 x 2850 mm
Friedrich Deckel, Model GK12, 3D Pantograph. Used by many of the top knifemakers for inlay and integral knives. Spindle adjustments, 1.5 to 1, all the way to 10 to 1 ratio. Adjustable spindle speeds. It's equipped with the 3D arm for more detailed and accurate 3D copying. It has a 3 phase motor, but runs easily off the Phase-A-Matic phase converter. Deckel is considered to be the Top of the Line Pantograph for knife and jewelry.
Serial number: 498-56Important note: A new spindle has recently been installedTravel paths: X: 800 mm Y: 500+50 mm Z: 550 mmSpindle speed: 12000 rpmTool holder: SK 40Number of tool positions: 40Control: SIEMENS SINUMERIK 840 Dincl. chip conveyor from KNOLL, paper belt filter system from KNOLL, zero-point clamping system from SCHUNK Type: SDE 138Table dimensions: 850 x 350 mmincl. the tool holders and tools on the tool changerincl. touch probe as shown in the pictures Atruck with a width of 3000 mm is required for transportReference: Wittner - Lot 11
turning diameter:1070 mmturning length:8500 mmtotal power requirement:62 kWturning diameter over slide rest:800 mmspindle bore:128 mmmax. workpiece weight between centers:8000 kgmax. workpiece weight:12000 kgbore spindle turning speed range:1,120-01120 U/mintailstock quill diameter:200 mmdimensions of the machine ca.:12 x 2,8 x 2,4 mMachine equiped with Alan Bradley 9 series CNC control- SAUTER 6-postiion revolving head- 360 mm seld centering steady rest- 385 mm rotary work rest (used for gun barrels)- faceplate 800 mm- chip conveyor
"Industrial electric furnace from the former VEB industrial furnace construction Harzgerode. The furnace is designed as a vertical pot/chamber furnace and is suitable for thermal treatment processes up to 600 °C. Equipped with solid furnace body, swivel cover with drive, ceramic lining and separate control cabinet with temperature control (JUMO dTRON 304). Suitable for heat treatment, preheating, drying and tempering processes in industrial applications. Condition • Used • Furnace body complete and stable • Refractory lining present, age-related signs of wear • Lid mechanism and drive present • Control installed (function not checked) • General condition according to age and useScope of delivery • Industrial electric furnace VEB IKI Type 137 N/1 • Swivel lid with drive • Integrated oven pot • Control cabinet with temperature control (JUMO dTRON 304) • Manufacturer ...
2 pieces with reference A271.200R13-17 with diameter 200 mm/ 1 piece with reference A271.250R13-17 with diameter 250 mm/ unused and in original packaging
turning diameter:830 mmturning length:4.000 mmturning diameter over bed slide:540 spindle bore:130 mmturning speed range:2 - 1.600 U/minrapid speed:4/5 m/minfeed speeds:1 - 2.000 mm/mintotal power requirement:55 kWdimensions of the machine ca.:7 x 2,2 x 2 mweight of the machine ca.:7,5 t
Weldon/ various diameters and lengths/ total: approx. 92 pieces
Welding table/clamping table, drilled holes and diagonal grid. Table-thickness: 15mm, hole-diameter: 28mm. Including a full set of accessories: - 4x 3D Angle - 6x Stop small - 6x Stop large - 1x Protractor - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp
Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools
48× HSK-A63 Tool Holders mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled. The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included.
consisting of approx. 23 piecesincl. hand clampReference: Pieper - Lot 30
Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg
Roll width 400mm Runway length: 2000mm Roller conveyor height 750 - 1000mm Weight 80Kg
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kgTechnical description :KUKA Robot Pedestal with drilling pattern for Kuka robot KRC2.KR 210 robot was mounted.Total height 1200 mm.
Stroke: 12 mmCompressive force: 28 kNDelay time: 0.063 smin./max. operating pressure: 3/6 barTable dimensions: approx. 200 x 160 mm
30 € 
