HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.
thread dia.: bis M 36 turning speeds: 0-100 U/minthread: M5 - M36 working area: 2050 Rmax.working range: 500 Rmin.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 5,5 kWweight - pallet system: ca. 500 kgFurnishing:- electro-hydraulic thread cutting machine- large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers- mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge- continuous speed adjustment- vertical/horizontal thread cutting possible- Lateral sorting of the quick-change inserts possible- Connection cable with 16A plug Special accessories included / quick-change inserts:M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22M27 / M30 / M33 / M36The data for this ad was created with ModulMWS - the software solution of ...
Heckert ZFWVG 250 x 2000 Thread Milling and Spline Hobbing Machine. Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 2000 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Dimensions 3700x2400x1600 mm Total weight 5200 kg Accessories; -heavy duty head -standard head -steady rest -flange -change gears full set
thread dia.: bis M 24 turning speeds: 0-600 / 0-150 U/minthread: M5 - M24 working area: 2050 Rmax.working range: 500 Rmin.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 3,0 kWweight - pallet system: ca. 300 kgFurnishing:- electro-hydraulic thread cutting machine- large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers- mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge- continuous speed adjustment- vertical/horizontal thread cutting possible- Lateral sorting of the quick-change inserts possible- Connection cable with 16A plug Special accessories included / quick-change inserts:M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control
Gewinde-Ø: 52 mmthreading length: 500 mmthread pitch: entsprechend Hohlspindel -Ø: 54 mmspindle turning speed range: 25 - 140 U/minturning speeds:: 6 Stufenvoltage: 380 V / 50 Hzmain drive motor: 3 kWtotal power requirement: 4,5 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,0 x 1,8 x 1,4 m• with pneumatic workpiece clamping,• threading head Z 52,• cooling device,• 2 sets of chaser holder,size: Z52/2B, + 21B• 5 sets of chaser jaws,pitch 1 - 2,5 mmMachine is in a good condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic tapping machine Multitapper 1212 CoastOne - Made in Finland Demonstration machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files
thread dia.: M6 - M36 mmturning speeds: 156 U/minradius: 1200 mmangle adjustable from - to: 0 - 90 Gradweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,4 x 0,1 x 0,7 mElectric tapping machine / 4450136SETFast and precise thread cutting with freely positionable swivel arm- The machine head can be swiveled from 0 to 90 degrees- Quick change chuck with slip clutch for safe thread cutting withoutRisk of breakage- Right-left rotation can be selected on the machine head- Setting of thread size, speed, pitch and cutting depth viaTouchscreen on the swivel arm- Manual mode: the stops after the set cutting depth is reachedSpindle automatic, forward and reverse must be activated manually.- Automatic mode: changes after the set cutting depth is reachedthe machine automatically from the forward to the return - ideal for thatThread cutting of several blind holesIncl. 1 each GT12 M6, M8 ...
Automatic Thread Processing Machine Multitapper 1212 CoastOne - Made in Finland Exhibition machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files
thread dia.: bis M 16 mmturning speeds: 0 - 600 U/minthread: M5 - M16 working area: 2050 Rmax.working area: 500 Rmin.table surface area: 900 mmengine output: 3,0 kWweight: ca. 250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PLC – controlled universal thread chasing machine suitable for all external and internal threads, as well as for peeling operations on rods and shafts (with peeling heads of different sizes), with 7" color touch screen. External and internal threads from M10 to M60 can be cut with the machine on all rotationally symmetrical workpieces such as pipes, bushings, shafts and reinforcing steel rods (taped external threads, drilled internal threads or rolled external threads with rolling heads). All thread types - male and female - metric ISO thread - Whitworth thread - trapezoidal thread - pipe thread - round thread - saw thread - UNC/UNF - and other USA threads etc. Strehlkopf speeds infinitely variable from 25 to 300 rpm Hollow spindle bore Ø 64 mm Maximum thread length 300 mm in one clamping (optional up to 600 mm length) The strehlkopf can also be used to peel wave-shaped ...
thread dia.: bis 4 / 100 mmthreading length: ? mmthread pitch: div. mmaccessories:: 4 Schneidköpfe total power requirement: 0,75 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 1,511,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Model: R1950-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 27kg Adapter Holder: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmin 30 ...
thread dia.: 3 - 10 mmTools speed: 120 - 600 U/mintable-size: 250 x 350 mmthroat: 250 mmvoltage: 380 Vthreading length: 80 mmtotal power requirement: 0,55 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,7 x 0,7 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Model: R1450-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1450-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1450-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 27kg Adapter Holder: TCS 2B Model: R1450-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm s ...
bar material dia. max.: 50 mm: keins : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Model: R950-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 18kg Adapter Holder: TCS 1B Model: R950-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 18kg Adapter Holder: TCS 1B Model: R950-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 25kg Adapter Holder: TCS 2B Model: R950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure ...
Gewinde-Ø: 52 mmthreading length: 500 mmthread pitch: entsprechend Hohlspindel -Ø: 54 mmspindle turning speed range: 25 - 140 U/minturning speeds:: 6 Stufenvoltage: 380 V / 50 Hzmain drive motor: 3 kWtotal power requirement: 4,5 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,0 x 1,8 x 1,4 m• with driven workpiece clamping,• threading head Z 52,• cooling device,• 2 sets of chaser holder,size: Z52/2B, + 21B• 5 sets of chaser jaws,pitch 1 - 2,5 mmMachine is in a good condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.
thread dia.: 1/4 bis 3 / 75 mmthreading length: ? mmthread pitch: ? mmturning speeds: 33 U/mintotal power requirement: 1 kWvoltage: 230 Vweight of the machine ca.: 0,074 tdimensions of the machine ca.: 1,20,81 m2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thread edge with extensive accessories, by hand or automatically to use. Table model, mobile also for the construction site Manufacturer GF Georg Fischer Table model with electric drive or by hand. Automatically opening thread cutting head Threaded jaws for: 1/2 inch, 3/4 inch, 3/8 inch, 1 inch, 1 1/2 inch, 2 inch Machine in transport box (steel) Rems Tornado Klauke Rothenberger Supertronic Special price
