We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Ref. -No.: 10157Manufacturer: CARL ZEISSYear of construction: 1997Type of control: HP 9000 Serie 700Control: Betriebsystem HP-UX.9.05Storage location: HalberstadtCountry of origin: DeutschlandTurntable: 1000x2100 mmMachine weight: 4.800 kgMachine Height: 3050 mmTable height above the floor: 850 mmX-Axis: 850 mmY-Axis: 1800 mmZ-Axis: 600 mmFurther information:Three coordinate measuring machineMicrocomputer controlX-axis as a longitudinally movable portal Y-axis cross slide in the portal Z-axis as measuring head quill (vertical) Passage between the portal approx. 1,000 / 1080 mmPassage in height approx. 750 mm
used
Description: table dimensions 2300x2200 mm . Disassembly includes rails and head to perform 'NOT exceptional' transportz-motion: 1,000 mm, x-motion: 1,500 mm, y-motion: 1,600 mm, control: PC, table surface area l x w : 2300x2200 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,800 x 3,450 mm
used
table length: 5.900 mmtable width: 3.640 mmx-travel: 2.500 mmy-travel: 5.000 mmz-travel: 1.500 mmweight of the machine ca.: 870 kgdimensions of the machine ca.: 5.900 X 3.640 X 4.555 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: serial number: 068422 MPEp=1,5 um (micrometer), MPEe=1,5+3L/1000 3D measuring , travels: X-axis: 1320 mm Y-axis: 970 mm Z-axis: 970 mm max. table load: 800 kg  , transport dimensions: main machine: 3300 x 2000 x 2900 mm, weight 4000kg footers: 1200 x 800 x 500 mm, weight 150 kg control unit: 1500 x 800 x 1200 mm, weight 200 kg x-motion: 1,320 mm, y-motion: 970 mm, z-motion: 970 mm, control: DEA, software: DEA, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 2,000 x 2,900 mm
used
DEA GLOBAL S 07.05.05 coordinate measuring machine was manufactured in Italy in 2004. The machine performs fast and highly accurate measurements of workpieces with complex shapes using the contact or non-contact method, represented as a set of coordinate points. The excellent quality and precision of the process is guaranteed thanks to the mounted in the DEA GLOBAL S 07 05 05 CMM machine an indexable RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, performing measurements in the X,Y,Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The DEA GLOBAL Status 07.05.05 measuring machine is also equipped with the highly advanced metrology software PC-DMIS 2019 R1, performing detailed geometric measurements. Technical specifications of the DEA GLOBAL S 07.05.05 measuring machine - maximum permissible error of length measurement MPEe: ± 2.3 + 3L/10 ...
used
Description: Serial number: G100329 Table dimensions: 1570 x 910 mm Measurement range: 1000 x 600 mm Including calibration ball and a probe from the manufacturer RENISHAW Converted to WENZEL in 2008 Software: CM2015 Capability to measure surface forms, curvesweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,900 x 2,300 mm
used
DEA SCIROCCO 151310 coordinate measuring machine built in 1997 in Italy, is used to make fast and highly accurate measurements of workpieces with complex shapes. Workpiece measurements are taken using contact or non-contact methods, which are then represented as a set of point coordinates. The dimensions of the measured workpiece are taken using the RENISHAW TP7M measuring probe, which is installed on the RENISHAW PH10MQ indexing head. The measuring probe uses strain gauge technology to eliminate granularity errors and achieve the highest measurement quality in the X,Y,Z axes with feeds of 1500 mm (X axis), 1300 mm (Y axis) and 1000 mm (Z axis). The measuring machine is offered with a wide range of equipment, including an advanced PC-DMIS package for Windows, performing detailed geometric measurements. The total weight of the machine is 3650 kg. Technical data of the DEA SCIROCC ...
used
Control UCC lite-2 Measuring range 700 x 450 x 350 mm Measuring heads (MH20i, PH1, PH6) Various touch probes
used
x-axis: 600 mmy-axis: 300 mmz-axis: 200 mmtable load capacity: 25 kgtotal power requirement: kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 1,0x0,9x0,6 mThe model is the XM in the sliding table version.Measurements are taken via an infrared camera, which has 7 markings on the manual button and 6 marks on the table.The device has hardly been used and is in new condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: The used PMM-F is specially designed for testing medium-sized components and gears. This 3D measuring machine has an overhead design and serves as a coordinate measuring machine, gear measuring centre, form tester and roughness measuring machine. Area of application: Inspection of medium-sized components and gears Design: Overhead design Functions: Coordinate measuring machine, gear measuring centre, form tester, roughness measuring machine Measuring range: approx. 3,000 x 2,000 x 1,600 mm Resolution: 5 nm Equipment: Various measuring probes Accessories: Work table, mobile container, chair Control desk: Equipped with a Dell PC The PMM-F offers a precise and versatile solution for measuring and testing components and gears in medium dimensions.z-motion: 1,000 mm, x-motion: 3,000 mm, y-motion: 2,000 mm, table surface area l x w : 3000x2000 mm, weight approx.: 8,500 kg, Appro ...
used
x-travel: 1000 mmy-travel: 3000 mmz-travel: 2000 mmOverall size: 4,5 x 4 x 5,2 mmachine weight ab.: 8,5 t3D measuring machine, Leitz/Hexagon, type PMMF1600 / M00-211-300,Equipment/ Accessories: - div. probes- div. accessories- overhead design,- used as a coordinate measuring machine,- gear measuring center,- form tester,- roughness measuring device,- measuring range approx. 3,000 x 2,000 x 1,600 mm,- resolution 5 nm,- control panel, PC, Dell, Intel Core i5 processor, 2 20 monitors Dell,The PMM-F is specially designed for the inspection of medium-sized components and gears. This 3D measuring machine is designed in an overheadconstruction and serves as a coordinate measuring machine,gear measuring center, form tester and roughness measuring device.Area of application: Inspection of medium-sized components and gearsDesign: Overhead designFunctions: Coordinate measuring machine, gear measuri ...
used
x-travel: 1000 mmy-travel: 3000 mmz-travel: 2000 mmweight: 8,5 tDimensions (HxWxD): 4,5x4x5,2 mm3D measuring machine, Leitz/Hexagon, type PMMF1600 / M00-211-300,- Overhead design, - Used as a coordinate measuring machine, - Gear measuring centre, - form tester,- roughness measuring device,- Measuring range approx. 3,000 x 2,000 x 1,600 mm,- resolution 5 nm, - Control desk, PC, Dell, Intel Core i5 processor, 2 20 monitors, DellThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Serial number: 0077806 Measuring range: X-axis: 500 mm Y-axis: 700 mm Z-axis: 400 mm Max. workpiece weight: 180 kg Max. workpiece height: 510 mm MPE (E) = (3.5 + 0.4 L/100) micrometers at tp 20 MPE (E) = (4.5 + 0.4 L/100) micrometers at tp 8 Temperature range: 19°C - 21°C Table dimensions: 638 x 1160 mm With accessories as shown in the picturesweight approx.: 615 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 1,080 x 2,350 mm
used
Measuring range X 500,Y700,Z400 mm Measuring head Renishaw MH 20i Software MCosmos-2 v4.2.R1
used
Inv. Num. : 7182 Type: Crysta Plus M544 Producer: Mitutoyo Created: 2012 Parameters: Table dimensions: 860 x 638 mm Axis X: 505 mm Axis Y: 405 mm Z axis: 405 mm Max. workpiece weight: 180 kg Machine dimensions: 2185 x 1082 x 1078 mm Machine weight: 440 kg
used
Description: Granite bed size: 1160 x 850 mm Incl. measuring probe Attention: Machine is supplied without PC and software.table surface area l x w : 1160x850 mm, weight approx.: 650 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,100 x 2,300 mm
used
Description: Support surface of the hard stone measuring plate approx. 850 x 850 mm, including existing documentationweight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,040 x 850 x 2,200 mm
used
Description: Coordinate measuring machine Measuring range: X-axis: 700 mm Y-axis: 1000 mm Z-axis: 600 mm Accuracy according to ISO 10360 E = [4.0 + 5.5L/1000] µm in the temperature range 18-22 °C Maximum workpiece weight: 800 kg Base material: granite Fixing holes M8 x 1,25 Mitutoyo linear scale system Resolution 0.0005 µm Mitutoyo CMMC DCC controller DC motors on all axes Pneumatic guideways Renishaw PH10M tilting head MCOSMOS V4.1 software Activation dongle included Measuring accessories includedz-motion: 600 mm, x-motion: 700 mm, y-motion: 1,000 mm, software: MCOSMOS v4.1, table surface area l x w : 1780x890 mm, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,560 x 2,910 mm
used
Description: Serial number: 9906116120 Without computer and license z-motion: 200 mm, x-motion: 400 mm, y-motion: 200 mm, weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 900 x 2,000 mm
used
Number of axes : 6 Measuring lenghth : 1.2 m Software : PCDMIS PRO
used
Retrofit to Renishaw Modus 05/2012 General: Year of construction: 1998 Renishaw Mode 1.8 metrology software CAD interfaces IGES & STEP Probe system PH20 5-axis switching head system Measuring range 900 x 1,200 x 800 mm
used
Coordinate Measuring Machine STIEFELMAYER - No 1 1 arm type C100 413514 Longitudinal arm travel: 1250 mm Arm travel in height: 1500 mm Electronic command GRUNDIG Marble dimensions: 3000 x 1500 x 350 mm Height on feet: 600 mm (with 6 feet) Weight: approx 4 T 2 same machines available
used
Description: MPEp=4um, MPEe= 1.5+3L/1000 3D Measuring travels: X-axis: 458 mm Y-axis: 508 mm Z-axis: 406 mm max. table load: 227 kg table dimensions: 750 ,x 560 mm column height: 2362 mm granite countertop artificial stone base  , transport dimensions: 1200 x 1200 x 1600 mm, weight 200 kg 1200 x 1200 x 800 mm, weight 200 kg 400 x 400 x 400 mm, weight 10 kg x-motion: 458 mm, y-motion: 508 mm, z-motion: 406 mm, software: BROWN & SHARPE METROLOGY, table surface area l x w : 750 x 560 mm, weight approx.: 410 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 2,450 x 1,600 mm
used
Description: Travel distances: X-axis: 457 mm Y-axis: 508 mm Z-axis: 406 mmweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,700 mm
used
Description: travels: X-axis: 350 mm Y-axis: 300 mm resolution: ,0.0005 mm repeatability: (2s) 0.002 mm  , export not possiblex-motion: 350 mm, y-motion: 300 mm, weight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm
used
Inv. Num. : 4906 Type: Poli Galaxy SL4 Producer: Wenzel Created: 1996, GO Parameters: Axis X: 1200 mm Axis Y: 1500 mm Z axis: 700 mm Control system: Metrosoft CM 3.9 Sensor head: PH10M Sensor Type: TP20 Touch the diameter: 6 mm Touch length: 25 mm Software: WPC 2010 Machine dimensions: 2700x2200x2900 mm Weight: 4 t Last calibration: 14.12.2018
used
No. 5104: 1 gebr. Coordinate measuring machine / CMM - Hobbyist device / ET carrier - Fabr. WENZEL / NUMEREX, Type 1318-10 Mnl, Bauj. 1987 Arb.-Ber.: 330 x 440 x 180 mm, Other: Space requirement approx. 1 x 1 x 1.5 m Weight approx. 300 kg
used
x-travel: 3000 mmy-travel: 2000 mmz-travel: 1000 mmControl: total power requirement: 3 kWweight of the machine ca.: tdimensions of the machine ca.: mmeasuring machineLeitz 30 20 10Year of construction 1990Traverse paths / measuring rangeX 3000mmY 2000mmZ 1000 mmLength 4915mmWidth 3760mmHeight 4062mmportal passage2380x1915mmmeasurement accuracy±0.003mmMaximum workpiece weight:24,000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table size 2500x1500 mm X Travel 1200 mm Y Travel 1800 mm Z Travel 1000 mm Measuring head VAST XT
used
Control UMess-300 / Software version 5.10 Travel X/Y/Z 850/1200/600mm switching probe / autom. Button change Accessories: Pushbutton frame with 5 button positions
used
Description: Measuring range X, Y, Z-axis 400, 500, 350 mm, maximum workpiece weight 280 kg, maximum travel speed 250 mm/s, probe head RENISHAW PH6, diameter 19 mm, length 28 mm, 50 g, measuring software U-Soft, Solid Ultra, version 4.2, machine designed for EROWA tools, includes clamping plate EROWA ER-016092, pneumatically controllableweight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 2,000 mm
used
Description: 'Serial number: 200502291230 Table dimensions: 860 x 680 mm Incl. ZEISS hand control, calibration ball and the measuring probes shown Attention: without the clamping holders and machine vice shown in the photos.weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,100 x 1,900 mm
used
x-travel: 1800 mmy-travel: 1200 mmz-travel: 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.