subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Flame and plasma cutting machine Bach Thermocut BJ 2008
Inv. Num. : 8711 Type: MG 2000 x 25/20 Producer: Maqfort Created: 1998, GO 2016 Parameters: Working length rollers: 2000 mm Max. sheet thickness: 25 mm
A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.
Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.
Pressing force: 2000kN, working length: 7200mm, connected load: 15kW, max. oil temperature: 45°C, max. operating pressure: 200bar, max. material thickness S235: 8mm, max. stroke: 215mm, max. closing speed: 200mm/s, pressing speed range: 1mm/s-10mm/s, stop time: 90ms, safety distance: 290mm, weight: approx. 38000kg. Including underfloor equipment and Fiessler AKAS 160 S safety system, year of manufacture: 2013. Documentation available. An on-site inspection is possible.
Inv. Num. : 8707 Type: TrumaBend V170 Producer: Trumpf Created: 2003 Parameters: Compressive force: 170 t Maximum bending length: 4080 mm Distance between frame walls: 3680 mm Stroke: 365 mm Machine weight: 18000 kg
Max. punching capacity: 800 kN Max. shear capacity: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of stamps and dies as desired
Key data: 1550 mm, 3 mm
Machine Type: Guillotine Shears Manufacturer: KRAMER Type: TM1a Year of Make: 1987 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-KRA-1025-1 DESCRIPTION We offer you a used guillotine shears from the manufacturer Kramer. Expected to be available from 10/07/2025 Cutting width max. 1550mm Cutting capacity max. 3.25mm Back gauge 550mm Weight 2065kg Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
TBF controller card Trumpf bending machine suitable for Trumpf bending machine year 1998-2004
DM01 control module for Trumpf Suitable for Trumpf built between 1998 and 2004
DM05 control module for Trumpf Suitable for Trumpf built between 1998 and 2004
Trumpf Motherboard Control Board DELEM DA 65/69 SNA 4891 Control Motherboard Board DA 65/69 Trumpf bending machine built 2001-2004 including flat screen and front control panel
DM02 control module to Trumpf. Suitable for Trumpf built between 1998 and 2004
Safety control for Trumpf. Suitable for V50 to V200 without Bendguart.
4000w IPG Loading 8500mm Unloading 6500mm 3D HEAD Under power and can be inspected upon request
plate thickness: 8 mmpressure: 60 tnotching: width x thickness: 310-310-8 mm mmweight of the machine ca.: 3,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mmplate thickness: 3 mmrear stop: von Hand, 750 mmnumber of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible.
gebr. Guillotine shears, Helmut Lotze, type 205.3000x16, built 1992 Working width: 3040mm Max. sheet thickness: 16mm Stand width: 3040mm Throat: 200mm Stroke width: 1000mm Motor power: 45kW Stroke rate: 22/min.
gebr. CNC punching press Finn-Power, type F6 SV, year 2005 Press force: 300kN Max. workpiece width: 4061mm Max. workpiece length: 1528mm Max. workpiece thickness: 8mm Max. workpiece weight: 200kg Fast feed X/Y: 80m/min/60m/min Tower head seats: 20 Tower head speed: 30rpm Travel speed: 100m/min Oil tank capacity: 330l Max. operating pressure: 300bar Dimensions X/Y/Z: approx. 5900mm, 6300mm, 2500mm Weight: approx. 13500kg Control: Siemens Sinumerik 840D Table of the machine has been extended. (Without machine housing)
gebr. CNC press brake Darley, type EHP 200, built in 1989 Press force: 2000kN Working width: 5200mm Power: 15kW Oil capacity: 160l Weight: approx. 20,000kg Tools & Accessories Included
Make: TRUMPF Type: TRUMATIC 2000R Year of Make: 2001 Working area: 1270 x 1270 mm Punching force: 18 tons Max. sheet thickness: 6.4 mm Max. workpiece weight: 75 kg Max. punching diameter: 76 mm Max. speeds: 90/60/108 m/min Accuracy: +/- 0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, Very good condition, only thin sheets
gebr. hydr. Guillotine shears, Fabr. LVD, Type MVN 25 / 4, built in 1984 Capacity 2500 x 4 mm with backgauge with documentation Other accessories: - Conveyor table - Lift table
Mandrel tube bending machine Fabr. LONG Type EL 45 Specifications: for pipe diameters 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s electr. Connection 380 V, 2.2 kW Weight approx. 1000 kg with tools: 16 x R 76 22 x R 76 28 x R 75 35 x R 105
Key data: 2000 mm, 6 mm
Köllschen AM 2000 × 6, built in 1970: Working width: 2,000 mm Max. sheet thickness: 6 mm Motor power: 12.5 kW
Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg
Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Range of tools is included in the price
Key data: 3240 mm, 5 mm
Max. bending length: 3240 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Program control via touchscreen (back gauge, bending angle adjustment, stroke of the upper beam, sheet thickness, number of pieces, etc.) Motorized height adjustment of the bending beam (adjustment of the sheet thickness) Manual and automatic mode possible Controlled backgauge with spring fingers Central lubrication Various additional bending and reinforcing rails Operating instructions 5700 kg
pressure: 170 tchamfer lenght: 4080 mmdistance between columns: 3680 mmcolumn arm: 410 mmdayligth: 385 mmstroke: 215 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 200 mmtable height: 1050 mmNumber of working hours: 25.430 hoil volume: 350 ltotal power requirement: 29 KVAweight of the machine ca.: 16.450 kg.range L-W-H: 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4Equipment:- CNC electro-hydraulic press brake/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tool and product library Graphic 2D programming Automatic bend sequence calculation and collision detection Emergency stop button at front - CNC ...
pressure: 170 tchamfer lenght: 3170 mmdistance between columns: 2700 mmcolumn arm: 420 mmdayligth: 470 mmstroke: 200 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/sectable width: 180 mmtable height: 960 mmoil volume: 235 L0: 300 barcontrolled axis: 6 AnzahlNumber of working hours: 29.400 htotal power requirement: 16.5 KWweight of the machine ca.: 11910 kgrange L-W-H: 4025 x 2020 x 2900 mm well-maintained condition () with only approx. 29.400 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=APP0HZjMms4Equipment:- electro-hydraulic CNC press brake- AMADA CNC control OPERATEUR 2 - 6 axes (X, Y1 + Y2, R, Z1 + Z2) swiveling operation - front left tool & program library- CNC-controlled back stop adjustment (X-axis) adjustment range .. 700 mm- CNC-controlled vertical adjustment of the stop fingers (R-axis) adjustment range .. 25 ...
