Manufacturer:
(Category: 106)
pressure: 63 tstroke: 4-60 mmno. of strokes: 85-500 Hub/minram - range of adjustment: 80 mm: 320 mmtable surface area: 750x600 mmram surface: 750x600 mmtotal power requirement: 31 kWweight of the machine ca.: 8,2 tdimensions of the machine ca.: BxTxH 2900x1900x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tthroat: 280 mmstroke: 8-112 mmno. of strokes: 55 / 82 Hub/minram - range of adjustment: 80 mmtable surface area: 800x570 mmram surface: 560x355 mmhole in the table: Ø 280 mmtable height: 800 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6 tdimensions of the machine ca.: BxTxH 1600x2200x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tthroat: 330 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 850x600 mmram surface: 550x360 mmhole in the table: Ø 240 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 1300x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 tdistance between columns: 0 mmstroke: 0 mmtotal power requirement: 0 kWweight of the machine ca.: 0 tdimensions of the machine ca.: 0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg
for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available
Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg
HYDRASAN 350 T hydraulic press was built in 2007. There are 2 such machines available for sale. A price included in the offer applies to one machine. Technical specifications of the HYDRASAN 350 T press - maximum press force: 350 t - lower work table surface area (L x W): 1300 x 420 mm - movable table stroke: 300 mm - distance between tables: 400 mm - approach speed: 4.8 mm/s - return speed: 5.1 mm/s - piston diameter (cylinder internal diameter): 230 mm - directional control valve: REXROTH 4WE 10 G33/CG24N9K4 - pump flow rate: 40 l/min - oil tank capacity: 120 l - hydraulic oil gauge: PAKKENS - working pressure: 230 bar - manostat: REXROTH HED 80A 20/350 - electric motor power: 5.5/11 kW - electric motor rotational speed: 1450 rpm - power supply: 380 V; 50 Hz - dimensions of the HYDRASAN machine (L x H): 1800 x 2200 mm
Maximum force ton-force 400 Slider stroke length mm 400 Slider strokes per minute 25 Maximum distance between table and slider (in lower position of slider) mm 470 Size of adjustment of distance between down-stamp a plate and slider mm 160 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 Slider overall dimensions: mm ·from front to rear 800 Main electric motor power kW 40 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight kg 32600
pressure: 50 tthroat: 230 mmstroke: 12-110 mmno. of strokes: 40-100 Hub/minram - range of adjustment: 70 mmtable surface area: 740x440 mmtable height: 840 mmhole in the table: Ø 140 mmram surface: 460x300 mmtool hole in ram: Ø 45 mmtotal power requirement: 4 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: BxTxH 1500x2500x2510 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 75 tstroke: 8-80 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 70 mmtable surface area: 900x600 mmram surface: 900x470 mmhole in the table: 450x180 mmdist. between columns - front to rear: 500x350 mmdist. between pillars (front to rear): 788 mmtotal power requirement: 10 kWweight of the machine ca.: 10 tdimensions of the machine ca.: BxTxH 1600x1200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 800 tons Stroke of slider: 400 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Max. daylight betwen bolster and slider SDAU: 850 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Cushion capacity, ton 125 Cushion stroke, mm 160 Press dimensions, mm 3800 x 2800 x 6900 Weight: 77 tons
Nominal force, kN 16,000 Slider travel, mm 630 Distance between table and slider, mm 810 The frequency of strokes of the slider continuous, 1/min 16 Table dimensions: length, width, mm 1 600x 1 600 Total power, kW 110.00 Machine size, mm 4670_4670_8110 Machine weight, kg 140 400
Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t
Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg
pressure: 200 tthroat: 450 mmstroke: 30 - 140 mmtable surface area: 1100 x 850 mmdayligth: 500 mmram surface: 800 x 600 mmram adjustment: 110 mmtool hole in ram: Durchm. 65 x Tiefe 105 mmno. of strokes: 45 Hub/mintotal power requirement: 15 kWweight of the machine ca.: 14,2 tdimensions of machine L x W x H: 3,18 x 2,09 x 3,05 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine
Hydropneumatic mode of operation Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
feed under pressure: 2,7 mm/secpressure: 100 tstroke: 400 mmtable surface area: 920 x 560 mmfeed down: 4,25 mm/secfeed up: 8,22 mm/secoil pressure max. in the work cylinder: 385 baroil volume: 26 ldiameter of piston: 125 mmcolumn daylight: 920 mmvoltage: 400 V/ 50 Hztotal power requirement: 4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,7 x 0,9 x 2,1 m• unused workshop press,• manual and hydraulical operation,• pressure cylinder horizontally moveable,• table can be hydraulically adjust in height,• Cylinder Ø 175 mm, piston base Ø 125 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tstroke: 400 mmtable surface area: 800 x 500 mmfeed down: 4,03 mm/secfeed up: 5,82 mm/seccolumn daylight: 820 mmoil pressure max. in the work cylinder: 400 baroil volume: 26 lvoltage: 400 V / 50 Hztotal power requirement: 3 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 0,9 x 2,1 m• unused workshop press,• manual and hydraulical operation,• Pressure cylinder moveable horizontally,• Working table hydraulical adjustable,• Cylinder Ø 150 mm, piston base Ø 85 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tquantity of oil: 480 ltracking travel: 30 mmsafety distance: 180 mmdimensions: 1440x1690x2800 mmtotal power requirement: 18,5 kWweight of the machine ca.: 4200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
REIS TUS 115 OK 100 Die Spotting Press pressure 100 t table surface area 890 x 1280 mm ram surface 1000 x 1200 mm distance between columns 1250 mm stroke 1035 mm distance table/ram, max. stroke up, adjustment up 1035 mm side window 700 mm table height over floor 630 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11 t Dimensions (WxDxH): 2,1 x 3,8 x 3,9 m swiveling ram movable table table - tiltable ram interlocking hydraulic ejector in table
Key data: 30 t
Hydraulic press can be used in a variety of ways as an assembly press, small series press, manual insert press or heating press in double-column presses Design (H-press) A tour of the press is possible at the Ennepetal camp. It is a 2.5-year-old, unused press with no operating hours, which is sold with a full warranty. List price: 45,000 Technical details: Robust machine frame Capacity: 30 tons – at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW – 15 hp Oil tank: 600 × 450 × 500 mm – with approx. 100 litres Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Fast forward: 45 mm/s Return: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm – with T-slots Plunger plate: 700 × 500 mm – with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Press table size 700 × 500 × ...
pressure: 200 tstroke: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 2.000 x 1.200 x 2.800 mmControl: Producer: HIDROLIKSANYOM: newType: HD 160Thrust: 160 ton.Stroke: 400 mmThroat depth: 480 mmTotal power requirement: 5,5 kWDistance between frames: 1.200 mmCylinder-Ø: 120 mmDimensions (LxWxH): 1.800 x 1.000 x 2.550 mmWeight: 1.400 kgAdditional information:• solid, welded construction• pressure cylinder lateral adjustable• operating electrical per switch lever /• pressure indication per Manometer• material support per cylinder, adjustable in height• CE-markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tdistance between columns: 580 mmstroke: 150 mmdayligth: 370 mmtable surface area: 560x400 mmram surface: 400x350 mmhole in the table: 80 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1500x500x2500 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tpassage width: 810 mmstroke: 400 mmtable surface area: 1140x740 mmram surface: 1140x740 mmdayligth: 670 mmweight of the machine ca.: 8 tdimensions of the machine ca.: 1800x1800x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Maschinen Schwartpaul GmbH
