Manufacturer:
(Category: 106)
pressure: 160 tchamfer lenght: 3550 mmstroke: 300 mmweight: 15400 kgdimensions: 4600x2600x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ULTRAPRAS WKR70H hydraulic press built in 2021 by the Polish company SAKOMET is designed for even the most demanding cold metal forming operations. The operations, such as precise cutting, stamping, punching and extruding of workpieces, are performed with a force of 16 tonnes using a hydraulic cylinder with a diameter of 100 mm. Induction limiters additionally allow adjustment of the piston advance and retraction limits, making the machine adaptable to the working range of various tools. In turn, centrally beneath the piston is a large cross-cut work table with a 90mm diameter bore. The UltraPras WKR 70H 16t hydraulic press weighs 420 kg. Technical specifications of the ULTRAPRAS WKR70H press - press force: 16 t - piston stroke: 70 mm - piston diameter: 100 mm - maximum working speed: 9.8 mm/s - minimum working speed: 2 mm/s - return speed: 20 mm/s - work table bore diameter: 9 ...
Description of the chip press: Powerful metal chip press with chip shredder for long turnings. The area of application is the processing of large quantities of milled and turning chips. Materials: aluminum, steel, cast iron Drip pan as oil tank Geared motor for optimal agitator operation Hydraulic Compression Cylinder Hydraulic press cylinder with two coaxial sections Diameter of briquettes 60 mm Automatic briquette length adjustment with displacement transducers Inductive Proximity Sensors Pre-compaction cylinder in conjunction with special compression hydraulic cylinder that compacts the material in the bushing-bulkhead unit Briquette ejection system, consisting of a compression chamber and a bulkhead with special anti-wear treatment Highly efficient closed-circuit oil cooling system consisting of an air/oil heat exchanger Hydraulic system with B ...
pressure: 100 tthroat: 315 mmstroke: 8 - 112 mmtable surface area: 725 x 570 mmram surface: 410 x 315 mmram adjustment: 80 mmno. of strokes: 55 / 82 Hub/mintool shank hole (depth x diameter): 85 x 50 mmdayligth: 355 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6 tdimensions of machine L x W x H: 2,00 x 1,00 x 2,87 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton
BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm.
Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg
Inv. Num. : 7827 Type: LKT 250D Producer: PRESSMONT Created: GO 2019 Parameters: Compressive force: 2500 kN Ram stroke: 250 mm Machine weight: 21000 kg
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von buerstlein Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen zirlguss Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen H ...
Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg
Used High Quality Bystronic pressbrake 6-axis for a sale.
pressure: ca.10 tthroat: anpassbar mmstroke: 250 mmtable surface area: 220 x 220 mm mmmaterial diameter max.: ca. Ø 267 mmtotal power requirement: 1,5 kWweight of the machine ca.: 430 kgdimensions of the machine ca.: 899 x 772 x 1520 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 5 tdistance between columns: 300 mmdayligth: ? mmweight of the machine ca.: - tdimensions of the machine ca.: - mHandspindelpresse 5 toWorkspace: Tischfläche 280 x 260Control: ca. 180 mm HubThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ULTRAPRAS UPV100TT SPECIAL hydraulic press built in 2022 Poland is the perfect choice for a range of demanding cold metal forming operations. This highly efficient and versatile machine can perform such operations as precision bending, profiling, flattening, bending, hole punching and stamping. Inside the robust design, there is a power unit-powered hydraulic piston with a diameter of 220 mm, which performs all these machining processes with a high press force of 100 tonnes. In addition, the entire working area is protected by light curtains, thanks to which the UltraPras four-column press also offers a high level of operational safety. During its service life, the machine has operated for just 595 hours and completed a total of 37042 work cycles. The UPV 100 TT SPECJAL 100t hydraulic press weighs 6500 kg. Technical specifications of the ULTRAPRAS UPV100TT SPECIAL press - maximum pre ...
pressure: 2 tdistance between columns: - mmstroke: ? mmthroat: ? mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mhydraulic press 2tDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm
Key data: 250 t
Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg
HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal
pressure: 20 tstroke: 200 mmtable-size: 550 x 550 mmworking speed:: 10 mm/ sec.work height max.: 940 mmtoolpiece height max.: 200 mmtotal power requirement: 2,2 kW: 200 x 10 mmweight: 650 kgdimensions: 1,1 x 0,6 x 1,22 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 tthroat: 295 mmstroke: 20-120 mmno. of strokes: 60/90 Hub/minram adjustment: 85 kWtable surface area: 920x580 mmram surface: 540x280 mmhole in the table: Ø280 mmtable height: 830 mmweight of the machine ca.: 5,1 tdimensions of the machine ca.: BxTxH 1500x2000x2560 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tthroat: 280 mmstroke: 10-90 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 750x540 mmram surface: 600x200 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø35 mmweight of the machine ca.: 3,7 tdimensions of the machine ca.: 1800x1800x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000
Key data: 220 t, 4000 mm
with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.
Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
with the following standard equipment: Chromed cylinder, welded steel frame, oil pressure gauge, pressure adjustment Optional equipment possible for an extra charge: Pressure Regulator, V-Block, Automatic Control, Hydraulically Moving Cylinder Pressure: 80 t Stroke: 400 mm Total power requirement: 3 kW Machine weight: 725 kg Dimensions: 900 x 1560 x 2400 mm Passage in the table: 900 mm Working speed: 5.4 mm/sec Return speed: 8.3 mm/sec
Clutch hub for hot forging press K8548 6300T Weight, kg 7100
Bästlein Gebrauchtmaschinenhandel GmbH
