Manufacturer:
(Category: 106)
pressure: 40 tno. of strokes: 500 Hub/minsheet width: mmtotal power requirement: 5,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 ttable length: 670 mmtable width: 570 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 tstroke: 180 mmdaylight between the columns: 540 x 100 mmdayligth: max. 990 mm: 72 mmdiameter of piston: 48 mmweight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,8 x 0,7 x 1,8 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 tstroke: 180 mmdaylight between the columns: 335 x 115 mmdayligth: max. 340 mm: 56 mmdiameter of piston: 40 mmweight of the machine ca.: 0,05 tdimensions of the machine ca.: 0,75 x 0,53 x 1,6 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 250 mmstroke: 100 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 1000 x 1700 x 2600 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tpassage width: NA mmstroke: 180 mmtable length: 690 mmtable width: 530 mmdistance between columns: 420 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mHydr. 4-Pillar Press for Embossing/CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3 tthroat: 0 mmstroke: 200 mmtotal power requirement: 15 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mFully Automatically Straightening Press, 3 Stations,parts turning, (bolts)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 tcolumn daylight: 2600 mmstroke: 800 mmtable surface area: 6000 x 3000 mm: max. 800 mmadjustment of press crosshead: 5200 mmslide adjustment -horizontal: 1800 mmCapacity: 162 l/minfeed down: 9 mm/secfeed up: 14 mm/sectotal power requirement: 45 kWweight of the machine ca.: 50 t- Hydraulics : Rexroth- Controls : Tailor- Cylinder chromed- Operation via remote control & joystick- Stroke length adjustable via sensors- Pressure adjustable via PLCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 26,0 kNstroke: 60 mmthroat: 110 mmWorking height from to: 70 - 250 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 46 Kgdimensions: 310 x 140 x 475 mmKnee lever hand presses SPECIAL PRICE!HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear withcomfortable and easy to adjust with a side crank.Stand height 475 mmEven more pressure in production without additional effort.Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology.Particularly stable construction of the spindle head and columnThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 tthroat: 0 mmstroke: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mD U N K E S (Germany)CNC Controlled Hydraulic Double Column PressModel HD 10Year 1993________________________________________________________Pressure 10 tons Ram stroke 400 mmMounting height 600 mmTable size 400 x 300 mmTable height above floor 820 mmRam area 400 x 300 mmRam bore 40 mmQuickspeed, downwards, max. 70 mm/sWorking speed, downwards, using max. pressure 40 mm/sWorking speed, min. 5 mm/sWorking speed adjustable from ...
Offer 24591 Specifications: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 40 mm/s - Return 0 - 200 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Thermoforming force 10 t - Largest deep-drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg
Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4410 10” Stroke 33” Shut Height 36” x 36” Bed 80 Strokes Per Minute Partially Rebuilt Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4621 10” Stroke 32” Shut Height 36” x 32” Bed 80 Strokes Per Minute Bolsters are included. Both presses are in working condition and under power.
pressure: 200 ttable length: 2500 mmtable width: 1800 mmtable travel: 2700 mmdayligth: 2250 mmupper clamping surface:: 1800x2500 column base area: 1900 mmtotal power requirement: 22 KWweight of the machine ca.: 30 tdimensions of the machine ca.: . mNominal force: 1000 kNTop plate pivotsTable is movableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created w ...
pressure: 28 tdistance between columns: 510 mmdayligth: 380 mmstroke: 260 mmweight of the machine ca.: ca. 750 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25100 Specifications: - Pressure capacity 200 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table width 180 mm - Projection 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Plunger stroke 150 mm - Adjustment range fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - with: - Back gauge with 2 stop fingers - Deer's foot tool - 4-fold universal die - Two-hand control panel, foot switch,
pressure: 80 tthroat: 280 mmstroke: 10-100 mmno. of strokes: 52/80 Hub/minram - range of adjustment: 60 mmtable surface area: 850x550mm mmram surface: 420x220 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø 45 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 2000x2000x2700mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 tchamfer lenght: 3050 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 150 mmreturn speed: 65 mm/secajustment speed: 50 mm/secwork height max.: 1010 mmoil volume: 150 ltotal power requirement: 11 kWweight of the machine ca.: 9500 kgdimensions: 3100 x 1750 x 2850 mmFurnishing:- DELEM CNC control DA65- controlled axes: Y1 + Y2 + X + R- Electric crowning device WILA, controlled via CNC- Electric back stop, travel range 600 mm- hydr. Upper tool holder WILA- hydr. WILA lower tool holder- front laser protection device FIESSLER- 5x manually adjustable stop fingers, foldable- 2x front support arms sliding system”- side + back protection device- Hand and foot controls- Operation manual?The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 ttable length: 1250 mmtable width: 900 mmtable travel: 1200 mmdayligth: 700 mmupper clamping surface:: 1000x1200 total power requirement: KVAweight of the machine ca.: 12 tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tchamfer lenght: 2000 mmweight of the machine ca.: 3 ttotal power requirement: kWdistance between columns: mmdimensions of the machine ca.: mpressure 35tomax. bending length 2000mmarrester behinddrive capacity 4,5 kWweight 3000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 tchamfer lenght: 2100 mmthroat: 420 mmstroke: 200 mmmachine weight ab.: 4.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Nominal Power: 400 ton Stroke par minute: 16-48 Adjustable stroke: 10-250 mm Table dimension: 1200 x 1200 mm Ram dimension: 1200 x 1200 mm Distance table – slide: 1000 mm Adjustment slide : 200 mm Motovariator: 22-66 HP
pressure: 1 tStroke: 315 mmtable surface area: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
pressure: 150 tchamfer lenght: 4300 mmdistance between columns: 3700 mmram stroke speed: 100 mm/secworking feed: 8 mm/secreturn speed: 80 mm/secstroke: 175 mmtable height: 920 mmControl: DELEM DA 52 total power requirement: 11 kWweight of the machine ca.: 15000 kgdimensions of the machine ca.: 4800 x 1700 x 2850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Manufacturer: Transmatic Type: TS-3M Year of Make: 2007 Plate size: 38 x 38 cm Maximum pressure: 600 g/cm2 Temperature setting: 50 – 305°C Condition Condition: Used Functional: Tested and fully functional
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 75 to stroke: 15 mmV-RING nominal force: 75 to stroke: 13 mmTOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mm distance between columns (H-frame): 560 mm passline opening (free passage in side columns): 270 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step max.: 999.99 mm sheet ...
CONTROLS PLC SIEMENS S7 300 PRESS DESIGN drive system: hydraulic PRESS FORCES total force (nominal): 800 toPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 2000 mm height above floor level: 700 mmSLIDE table surface (left-right): 2000 mm table surface (front-back): 2000 mm stroke: 900 mmSLIDE (HYDR. PRESS) approximation velocity max.: 400 mm/s working velocity min.: 5 mm/s working velocity max.: 160 mm/s return velocity max.: 300 mm/sTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1700 mm distance between columns (H-frame): 2100 mmELECTRICAL SPECIFICATIONS total power consumption: 370 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / ...
CONTROLS PLC SIEMENS S7-400 PRESS DESIGN drive system: hydraulic number of suspensions: 1 slide ejectors / cushion: no table cushion: no opening in table: no feedstock transport direction: back-front PRESS FORCES total force (nominal): 1000 toPRESS TABLE table surface (left-right): 2066 mm table surface (front-back): 2000 mm height above floor level: 630 mmSLIDE stroke: 900 mmSLIDE (HYDR. PRESS) approximation velocity max.: 600 mm/s working velocity min.: 15 mm/s working velocity max.: 40 mm/s return velocity max.: 390 mm/s return force: 100 toTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1710 mm distance table - slide max.: 1700 mmELECTRICAL SPECIFIC ...
PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock SLIDE total force (nominal): 160 to stroke: 60 mm stroke rate (max.): 72 /minCOUNTER RAM nominal force: 40 to stroke: 60 mmV-RING nominal force: 50 to stroke: 13 mmTOOL DIMENSIONS lower table (left-right): 470 mm lower table (front-back): 470 mm upper table (left-right): 500 mm upper table (front-back): 470 mm shut height max.: 277 mm ram adjustment: 80 mm distance between columns (H-frame): 500 mm passline opening (free passage in side columns): 220 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 210 mm sheet thickness max.: 6 mm feeding step max.: 180 mmELECTRICAL SPECIFICAT ...
