Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 106-517)

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
item-No.: 137128010

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: 42 Rudniki, Mstowska 10A Land-pl

add to watchlist

Erfurt Press, Mechanic Press, H – 3m, 500 T, table 2800 x 2000mm ( it is extented for 10 cm each side – table and slide)

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
item-No.: 124328246
New in: 1980

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: Land-pl

add to watchlist

Press Erfurt Model: PKZZ-III-250-1FS YOM: 1980 Press capacity: 250 ton Table size: 2500 x 1250 mm – slidding table Slide size: 2500 x 1250 mm Slide stroke: 400 mm Max. height of the tool. Position slider SDAU: 954 mm Min. height of the tool. Position slider SDAD: 715 mm Slide adjustment: 250 mm SPM 25 Cushion drawing: operates

presses / Mechanical Presses
date: 23.05.2024 add to watchlist
item-No.: 164133351
New in: 1990

used

Seller: ProdEq Trading GmbH
Location: Land-ch

add to watchlist

PRESS FORCES  total force (nominal): 80 toPRESS TABLE  table surface (left-right): 950 mm  table surface (front-back): 560 mm  thickness of bolster plate: 90 mm  opening in bed (diameter): 90 mm  opening in bed (left-right): 335 mm  opening in bed (front-back): 250 mmSLIDE  table surface (left-right): 540 mm  table surface (front-back): 420 mm  spigot hole diameter: 50 mm  stroke: 123 mm  stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS)  slide adjustment: 65 mm  stroke min.: 4 mm  stroke max.: 123 mm  hydraulic overload protection: yes   main drive power: 5.5 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 430 mm  throat (C-frame): 280 mm  distance between columns  ...

presses / Mechanical Presses
date: 23.05.2024 add to watchlist
item-No.: 164133358
New in: 1994

used

Seller: ProdEq Trading GmbH
Location: Land-ch

add to watchlist

PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided   number of slide actions: 1 PRESS FORCES  total force (nominal): 45 toPRESS TABLE  table surface (left-right): 700 mm  table surface (front-back): 450 mm  opening in bed (diameter): 85 mm  opening in bed (left-right): 220 mm  opening in bed (front-back): 180 mmSLIDE  table surface (left-right): 410 mm  table surface (front-back): 280 mm  spigot hole diameter: 40 mm  stroke: 92 mm  stroke rate (max.): 105 /minSLIDE (MECHAN. PRESS)  slide adjustment: 65 mm  stroke min.: 6 mm  stroke max.: 92 mm  main drive power: 4 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 340 mmDIMENSIONS / WEIGHTS&nbs ...

presses / Mechanical Presses
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 164105587

used

checkTOP Seller: Surplex GmbH
Location: Bad Rappenau-Grombach Land-de
Price: used machinery auction RESALE 50 € add to watchlist

Description: Diameter of the spindle wheel approx. 600 mmtable surface area l x w : 430x300 mm, Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,550 mm, weight approx.: 300 kg

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
item-No.: 124929852

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: Land-pl

add to watchlist

Mechanical Press KAISER 250 TON. Model: V 250 WR/2340 Condition: good, complete Technical details: Force: 250 T Dimensioni piano: 2000x1200 mm Dimensioni slitta: 2000x1200 mm Slide travel: 280 mm Slide adjustment: 150 mm Mold heigh: 495 mm Number of strokes: 15-60 per mimute

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 124929854

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: Land-pl

add to watchlist

Mechanical Press KAISER 315 TON. Model: V 315 WR/2340 Condition: good, complete Technical details: Force: 315 T Dimensioni piano: 2280x1250 mm Slide size: 2000x1200 mm Slide travel: 280 mm Slide adjustment: 150 mm Mold heigh: 500 mm Number of strokes: 20-60 per mimute

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
item-No.: 131519986

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: Land-pl

add to watchlist

Kieserling Press, mechanic press, 500t, table 2900 x 1550mm

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
item-No.: 137202868

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: 42 Rudniki, Mstowska 10A Land-pl

add to watchlist

Kiesserling Press, mechanic press, 500T, table 2900 x 1550mm under power

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
item-No.: 132487259

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: 42 Rudniki, Mstowska 10A Land-pl

add to watchlist

MECHANICAL PRESS KRUPP 1000 TONS Model: PDqV 4-1000 Condition: Very good, complete, dismantled Technical details: Force: 1000T Strokes per min. 8-30 The stroke 400 mm Shut height (SDAU) 1300 mm Slide the adjustment 300 mm Slide the dimensions 4200 x 2000 mm Bed size dimensions 4200 x 2000 mm Frontal opening 4300mm Lateral window 2600 x 1400 mm

presses / Mechanical Presses
date: 08.04.2024 add to watchlist
item-No.: 163752829

used

Seller: SGTOOL SNC di Sferlazza Iuri e Giulietti Laura
Location: 20100 Milan Land-it

add to watchlist

Number of conrods 1 Table dimensions ( x-y/mm) 1600 X 900 Slide Dimensions X-Y (mm) 1200 X 900 Stroke (mm) 18 Second value of the stroke (mm) 200 Light at T.D.C.(mm) 700 Strokes type Adjustable Stroke per minute 30 - 60 CE marked

presses / Mechanical Presses
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 162806129
New in: 1970

used

check Seller: Kemmerich Werkzeugmaschinen GmbH
Location: ab Werksstandort,unter Strom Land-de

add to watchlist

pressure: 1500 tdaylight: 5060 mmmould space: - mmtable surface area: 5000 x 2700 mmmain drive: 90 kWmax. ram stroke: 800 mmram adjustment: 600 mmno. of strokes: 10 Hub/minram head dimension: 5000 x 2700 mmdie cushion stroke: 200 mmdie cushion: tototal power requirement: kWweight of the machine ca.: tMECHANICAL PRESS- Distance between clamping plate and ram with stroke at bottom, adjustment at top: 1600 mm- Compressed air pulling device in the table-- stroke 200mm- Ejector in ram-- Stroke 150mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Mechanical Presses
date: 22.05.2024 add to watchlist
item-No.: 164131267
New in: 1975

used

TOP Seller: Surplex GmbH
Location: Abrera Land-es

add to watchlist

Description: Serial Number: 74-20-0293 Width between uprights:  ,3700 mm , Table surface: 3350x2134 nn Punch stroke: 762 mm , Distance between plate: 1322 Strokes per minute: 16/min Table openings: 3 Main motor: 90 kw 1500rpm Punch Motor: 7.5kw 1500 rpm , Lubrication equipment: 0.75kw 1500 rpm , Pump motor power: 1.1 kw 3000rpm , Voltage: 220V, 50 hz Pneumatic installation: , Surface area: 1420x990 mm , Piston diameter: 800 mm , Stroke of plunger 305 mmm , Total power: 180Mp  ,Approx. Onsite Dimension. (l x w x h): 4,000 x 6,000 x 12,000 mm, weight approx.: 180,000 kg

presses / Mechanical Presses
date: 23.05.2024 add to watchlist
item-No.: 164133367
New in: 2003

used

Seller: ProdEq Trading GmbH
Location: Land-de

add to watchlist

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 315 to  nominal work capacity: 38 kNmPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1200 mm  thickness of bolster plate: 200 mmSLIDE  slide force: 315 to  table surface (left-right): 1995 mm  table surface (front-back): 1100 mm  stroke: 160 mm  stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS)  slide adjustment: 140 mm  stroke rate (min.): 20 /min  stroke rate (max.): 80 /min  main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS& ...

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
item-No.: 67146623
New in: 1984

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: Land-pl

add to watchlist

Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1984 Condition: Very good Location: Rudniki - Poland Press Capacity: 400 Tons Rated Tonnage Point 12.5 mm The Height: 1018 mm Slide Adjustment: 305 mm Slide Stroke: 610 mm Bolster Size: 2743 x 1524 mm Slide Size: 2743 x 1524 mm SPM: 20 The Cushion Capacity: 70 tons x 2 pcs. The Cushion Stroke: 203 mm Main Motor Capacity: 60 KW Moving Bolster: Front Exit

presses / Mechanical Presses
date: 22.04.2024 add to watchlist
approved
dealer
item-No.: 163247747
New in: 2010

used

check Seller: GORBREX Machinery Trade Sp.z o.o.
Location: 42 Rudniki Land-pl

add to watchlist

Technical details: 400 ton press – 4 pcs -Manufacturer : SIMPAC -Model : MC2-400 -Y.O.M : 2010 -Capacity : 400 ton -Stroke : 320 mm -SPM : 30 -The height : 700 mm -Slide adjust : 120 mm -Slide area : 2700 x 1200 mm -Bolster area : 2800 x 1300 mm -Bolster thickness : 230 mm -Main motor : 37 Kw 350 ton press – 7 pcs -Manufacturer : SIMPAC -Model : MC2-350 -Y.O.M : 2005 -Capacity : 350 ton -Stroke : 300 mm -S.P.M : 35 -The height : 700 mm -Slide adjust : 120 mm -Slide area : 2600 x 1200 mm -Bolster area : 2700 x 1300 mm -Bolster thickness : 220 mm -Main motor : 37 Kw

presses / Mechanical Presses
date: 18.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 147514685
New in: 2005

used

check Seller: MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF Land-de

add to watchlist

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

presses / Mechanical Presses
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 164081110
New in: 1994

used

checkTOP Seller: Surplex GmbH
Location: Amieira, Marinha Grande Land-pt
Price: used machinery auction RESALE 8.000 € add to watchlist

Description: TCS MOLDING SYSTEMS TCS - 100T Press no. 47 100 ton 415V | 50Hz | 23Kw Max. pressing force: 100 to, table surface area l x w : 1248x1148 mm, Approx. Onsite Dimension. (l x w x h): 8,000 x 2,900 x 2,300 mm, weight approx.: 14,000 kg

presses / Mechanical Presses
date: 22.05.2024 add to watchlist
item-No.: 164131275

used

TOP Seller: Surplex GmbH
Location: Worthing Land-gb
Price: used machinery auction RESALE 200 € add to watchlist

Description: Work bench with 2 various bench vises mounted. 1x flywheel press, stroke approx. 100 mm Surface plate size 460x460 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,800 mm, weight approx.: 300 Approx. Onsite kg

presses / Mechanical Presses
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 164105588

used

checkTOP Seller: Surplex GmbH
Location: Bad Rappenau-Grombach Land-de
Price: used machinery auction RESALE 25 € add to watchlist

table surface area l x w : 120x110 mm, Approx. Onsite Dimension. (l x w x h): 360 x 360 x 1,300 mm, weight approx.: 50 kg

presses / Mechanical Presses
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 162531461

used

Location: Land-at

add to watchlist

Mechanical Transfer Press ZANI 300 ton with Feeder Line composed of Rewinder + Feeder + Unwinder Fixed stroke: 96.5 mm Height of the ram from the table: 600 mm Print speed in automatic mode: 20 - 60 strokes/min Table dimensions: 1500 x 600 mm Ram dimensions: 1500 x 600 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information