Manufacturer:
(Category: 106)
pressure: 90.0 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 135 mmdayligth: 180 mmthroat: 350 mmworking feed: 8.0 mm/secreturn speed: 68.0 mm/secwork height max.: 805 mmback stop - adjustable: max. 620 mmControl: ENC 310 oil volume: 100 ltotal power requirement: 7.5 kWweight: 5840 kgrange L-W-H: 4000 x 2040 x 2450 mm from a maintenance workshop very good conditions ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=PIiHc2e7h28Features: - NC electro-hydraulic press brake- with DURMA NC control ENC 310 Illuminated LCD display X-axis control & value display Y-axis control & value display- Swiveling operator panel, front left- NC controlled axes: Y1/Y2 + X- NC electro-motorized backgauge (X-axis) with 2x manually adjustable backgauge fingers including lateral and height adjustment (Z+R axes)- NC electro-motorized depth adjustment (Y-a ...
pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2600 mmthroat: 250 mmdayligth: 325 mmpiston stroke: 120 mmtable height: 875 mmajustment speed: 70.0 mm/secworking feed: 9.0 mm/secreturn speed: 60.0 mm/secpressure: 220 barControl: ATL 550 total power requirement: 5.6 kWweight: 8400 kgrange L-W-H: 3500 x 1700 x 2240 mm from a maintenance workshop very good / well-maintained condition ()Equipment:- simple NC electro-hydraulic press brake with torsion shaft- ATLANTIC NC control ATL 550 Positioning of the backgauge (X) Positioning of the depth adjustment (Y1 Y2) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, front left- NC electro-motorized backgauge (X axis) 2x manually adjustable stop fingers- 1x set of split roe foot upper tools- 1x rotating universal die block- 1x freely movable 2-hand/foot control- Sa ...
CONTROLS PLC SIEMENS SIMATIC PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 630 toPRESS TABLE table surface (left-right): 2500 mm table surface (front-back): 1300 mmDIE CUSHION (TABLE CUSHION) cushion force: 250 to stroke: 400 mm cushion plate surface (left-right): 2450 mm cushion plate surface (front-back): 1250 mm
CONTROLS PLC SIEMENS S7 300 PRESS DESIGN drive system: hydraulic frame design: H-frame, monoblock openings in uprights: no number of suspensions: 2 number of slide actions: 1 slide ejectors / cushion: yes table cushion: yes quick die change system: yes moving bolster design: front PRESS FORCES total force (nominal): 400 toPRESS TABLE table surface (left-right): 2480 mm table surface (front-back): 1600 mm thickness of bolster plate: 200 mm height above floor level: 800 mmSLIDE slide force: 400 to table surface (left-right): 2350 mm table surface (front-back): 1600 mm stroke: 630 mmSLIDE (HYDR. PRESS) approximation velocity max.: 270 mm/s return velocit ...
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table-Dimensions: 1500/3516/H260 mm-Plate thickness: 30 mm-Plate is: with supporting ribs-1x T slot: 17 mm-Weight: 1800 kg
pressure: 175 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: DELEM DA-66T stroke: 265 mmweight of the machine ca.: 11.500 kgdimensions of the machine ca.: 4250x2550x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tchamfer lenght: 2550 mmdistance between columns: 2050 mmControl: DELEM DA-66 T stroke: 265 mmweight of the machine ca.: 7.900 kgdimensions of the machine ca.: 4200x1800x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Extra Heavy Duty Pressbrake- 1 set top tooling 88 Gr- 1 set lower dies- Cybelec DNC 1200- Y1,Y2,X,R1,R2,R3,R4,OWK- 4 fingers R1/R2/R3/R4 with 400 mm stroke- Crowning in lower blade 9 cylinders What kind off jobs built for:- Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs- Defence & Military; armored vehicle structures, reinforced structe hardox / strenx- Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners- Contruction and Fabrication; bridge giders, box columns, steel frames - On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts- Boiler an vessels; pressure vessels, power plant components, tower or pole section - Bending examples:35 mm thickness at 10 meter length26 mm thickness at 12 meter length20 mm thickness at 15 meter length
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate-Clamping plate: length 5020 mm-Plate thickness: 37 mm-Dimensions: 5020/500 / H255 mm-Weight: 1550 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool -Tool profile: Radius 132.5 mm -Dimensions: see photos -Dimensions of base: 435/250/H55 mm / Weight 28.6 kg -Dimensions of upper part: 350/300/H290 mm / Weight 104.6 kg -Transport dimensions: 435/300/H345 mm Total weight: 133.2 kg
Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press-Manufacturer: Kalisz, manual screw press type YB-1 with solid base-Pressure: max. 10,000 kg-Stroke: 200mm-Intermediate size: 320 mm-Spindle holder: Ø 20 mm-Table size: 290 x 250 mm, slot width 14 mm-Dimensions: 1160/860/H1750 mm-Total weight: 350 kg
Hydraulic press, oil hydraulic press, shear press -Manufacturer: Santenberg, hydraulic shear press -Hydraulic unit: HyPneu 0.75 kW / 100 bar -Individual components: see photos -Dimensions: 1190/910/H1670 mm -Weight: 262 kg
Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press -Flat bar bender: hydraulic profile bending machine -Base: on casters, table folds on both sides -Operating mode: Manual and automatic operation -Accessories: see photos -Overall dimensions: 2155/1320/H1070 mm -Transport dimensions: 1320/840/H1245 mm -Weight: 404 kg
T-slot plate, clamping plate with holes, plate field, welding table, welding table-Dimensions: 3012/2010/H710 mm-Panel thickness: 82 mm-Plate: with supporting ribs-Weight: 3370 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg
Pressing tool, sheet metal former, forming tool, bending tool, folding tool, bending tool, die, die-casting tool -Bending tool: Pressing tool for press brake / press, 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each -Groove width: 58/52 mm -Angle: 90° Dimensions: see photos / technical drawing -Price/Fee: complete -Transport dimensions: 450/300/H115 mm -Weight: 48.3 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool -Profile: Ø 45 mm -Dimensions: 535/195/H140 mm -Weight: 35 kg
T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table-Dimensions: 1500/3510/H950 mm-Plate thickness: 20 mm-Plate is: with supporting ribs-1x T slot: 18 mm-with: detachable stop-Weight: 2600 kg
T-slot plate, measuring plate, measuring table, clamping plate with T slots, plate field, welding table, welding table -Dimensions: 620/1560/H260 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T-slot: 15 mm -Weight: 360 kg
Hydraulic press, oil hydraulic press, pressing machine, pressing tool, pressing pliers -Hydraulic press: Hydraulic unit novopress type WK 9483 -Pressure: max. 150 bar / 0.45 l/min -with punch set: 1x Ø 18mm, 2x Ø 14mm, 1x Ø11 mm, 1x Ø 9mm -Operation: foot pedal -Connection hoses: for pressing tongs or similar -Dimensions: 850/550/H1250mm -Weight: 158 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 300 mm -Dimensions: see photos -Overall dimensions: 300/80/H110 mm -Weight: 17.9 kg
T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg
pressing tool, sheet metal former, forming tool, ball forming tool-Pressing tool: ball forming tool-Radius: 50.11 mm-Hole: Ø 40 mm-Dimensions: Ø 165 x 270 mm-Weight: 18.4 kg
PRESS FORCES total force (nominal): 100 toPRESS TABLE table surface (left-right): 950 mm table surface (front-back): 660 mm thickness of bolster plate: 68 mmSLIDE table surface (left-right): 540 mm table surface (front-back): 450 mm spigot hole diameter: 60 mm stroke: 130 mm stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS) slide adjustment: 100 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 370 mmDIMENSIONS / WEIGHTS total weight approx.: 7000 kgLocated in Barcelona - Spain2 identical units available
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool, 2-piece -Profile: Angle 90° -Hole: Ø 40 mm -Dimensions: 160/140/H345 mm -Weight: 40.1 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: molding tool/press tool-Profile: Ø 98 mm-Receptacle: Ø 40 mm-Dimensions: Ø 98 x 185 mm-Weight: 7.4 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: forming tool / press tool adapter MST Ø 85-Receptacle: Ø 40 mm-Receiving thread: M34-Dimensions: Ø 85 x 160 mm-Weight: 4.5 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, adapter-Die tool: forming tool/press tool adapter-Receptacle: Ø 40 mm-Receiving thread: M33-Quantity: 2x adapters available-Price: per piece.-Dimensions: Ø 40 x 100 mm-Weight: 0.8 kg/pc.
