Manufacturer:
(Category: 106)
: neu : ca. 4 Monate ab Auftragse : Italien : 74800 €: 1413.72 €: 100 to: 500 mm: 1000x800 mm: 600 mm: 26 mm/s: 5 mm/s: 4 kW: 1260 mm: 1060 mm: 2400 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 2000 tdistance between columns: - mmstroke: 140 mmstrokes per minute: 15-50 H/mintable surface area: 1000 x 1100 mmdimension of ram: - mmweight of tools max.: - kgShut Height: 650 mmdistance table - lower edge of ram: - mmram adjustment: 25 mmmain drive: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mmProduction of stamped and formed parts, mechanical drive with toggle lever driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 4500x2000x2900 mmweight: 13.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25461 Technical data: - Max. pressing force 30 t - Press pressure regulation - Stroke infinitely adjustable up to 200 mm - Lifting speed adjustable - Max. installation height 450 mm - Machine table with T slots W 800 x D 500 mm - Penetration between the columns 600 mm - Usable table surface W 800 x D 500 mm - Drive 400 V / 11 kW - Space requirement approx. W 1000 x H 2300 x D 1600 mm - Weight approx. 2500 kg
Hydraulic Press DEGUMA P12-12 II
- Hydraulic clutch- CE-Safety 2e hand opperator system- Adjustable stroke / ram - Full set books / drawing / CE-Mark- Note in the Neck / Throath machine is repaired !- Only EUR 5500
: neu : ca. 4 Monate ab Auftragse : Italien : 31400 €: 599.74 €: 100 to: 500 mm: 800x600 mm: 615 mm: 26 mm/s: 4 mm/s: 4 kW: 1600 mm: 900 mm: 2300 mm: 3100 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PRESS DESIGN quick die change system: yes SLIDE total force (nominal): 100 to stroke: 20 mm stroke rate (max.): 80 /minTOOL DIMENSIONS lower table (left-right): 430 mm shut height max.: 220 mmApprox. 79 million strokes
- Hydraulic Clutch- CE-Safety 2e hand opperator system- Adjustable stroke / ram - Full set books / drawing / CE-Mark-
: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 52200 €: 804.11 €: 1 : 42100 €: 60 to: 2100 mm: X und Y Achse : 160 mm: 1700 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 7,5 kW: 2450 mm: 1600 mm: 2235 mm: 4340 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslaser safety device Fiesslermotorized crowning tableintermediate pieces for the upper tool clampingdie holder for 60 mm toolsdie with 4 V openingsupper tool, slightly cranked, sectionedfoot pedaluser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 127400 €: 2407.86 €: 220 to: 4050 mm: Y1 / Y2 / X und R Achse : 265 mm: 3600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 12 mm/s: 180 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 2 x 11 kW: 5250 mm: 1770 mm: 2900 mm: 15000 kg1 SERVO MOTOR AND PUMP PER CYLINDERStandard accessories:4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm t ...
: gebraucht : 2022 : 8254 : prompt, Zwischenverkauf v : Türkei : 22240 €: 1 : 30 to: 1250 mm: X und Y Achse : 150 mm: 1010 mm: 255 mm: 265 mm: hydraulisch : 210 mm/s: 10 mm/s: 3 kW: 1760 mm: 1375 mm: 2135 mm: 1700 kgDEMO MACHINE, MINT CONDITIONNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMANincl. laser protection device Fiessler(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L
PRESS DESIGN drive system: eccentric / crank table cushion: yes PRESS FORCES total force (nominal): 63 to nominal work capacity: 630 kNmPRESS TABLE table surface (left-right): 900 mm table surface (front-back): 560 mm opening in bed (diameter): 250 mmSLIDE table surface (left-right): 450 mm table surface (front-back): 310 mm clamping surface diameter: 50 mm stroke: 100 mm stroke rate (max.): 100 /minSLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 17.5 mm stroke max.: 100 mmDIE CUSHION (TABLE CUSHION) number of cushions: 1 TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 340 mm distance table - slide max.: 440 mmELECTRICAL SPECIFICATIONS total powe ...
PRESS DESIGN drive system: eccentric / crank table cushion: yes PRESS FORCES total force (nominal): 100 to nominal work capacity: 1000 kNmPRESS TABLE table surface (left-right): 1100 mm table surface (front-back): 660 mm thickness of bolster plate: 100 mmSLIDE table surface (left-right): 640 mm table surface (front-back): 420 mm spigot hole diameter: 50 mm stroke: 130 mm stroke rate (max.): 60 /minSLIDE (MECHAN. PRESS) slide adjustment: 110 mm stroke min.: 20 mm stroke max.: 130 mmDIE CUSHION (TABLE CUSHION) number of cushions: 1 TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 450 mm distance table - slide max.: 580 mmELECTRICAL SPECIFICATIONS total power c ...
pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 175 mmdayligth: 240 mmthroat: 350 mmworking feed: 9.0 mm/secreturn speed: 86.0 mm/secwork height max.: ca. 920 mmControl: ERD 110 M oil volume: 150 ltotal power requirement: 15.0 kWweight: 9300 kgrange L-W-H: 4250 x 2170 x 2800 mmFeatures:- NC electro-hydraulic press brakes- with DURMA NC control ERD 110M Illuminated LCD display X-axis control & value display Y-axis control & value display- Swiveling operator panel, front left- NC controlled axes: Y1/Y2 + X- NC electro-motorized backgauge (X-axis) with 2x manually adjustable stop fingers including lateral and height adjustment (Z+R axes)- NC electro-motorized depth adjustment (Y-axis)- Manual bending table crowning Adjustment via hand crank with analog value display- AMADA/PROMECAM upper tool holder with upper wedge crowning & quick-change adapte ...
: neu : ca. 4 Monate ab Auftragse : Italien : 123000 €: 2324.7 €: 170 to: 500 mm: 1200x700 mm: 600 mm: 110 mm/s: 7 mm/s: 70 mm/s: 19 kW: 2700 mm: 1600 mm: 2650 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: ca. 5 tdayligth: 110 mmthroat: 40 mmweight of the machine ca.: ca. 50 kgdimensions of the machine ca.: 1,2 x 0,5 x 1,3 mFunction: ready for operation: 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 ttable length: 1600 mmtable width: 1300 mmdayligth: 1800 mmControl: Simatic ram return capacity: 6000 kgtable load capacity: 7000 kptotal power requirement: ? ca. 25-30 kWweight of the machine ca.: 19 tdimensions of the machine ca.: 2,95 5 6 mSpecial price 49,900 EUR from foundation upon acceptance until January 30, 2026. Normal price from warehouse.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Türkei : 66900 €: 1264.41 €: 60 to: 250 mm: 550 x 850 mm: 600x1000 mm: 500 mm: 100 mm/s: 10 mm/s: 165 mm/s: 11 kW: 1950 mm: 1900 mm: 2750 mm: 5300 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 200 t
Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94120 €: 1778.87 €: 175 to: 4050 mm: Y1 / Y2 / X Achse : 265 mm: 3600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 18.5 kW: 5250 mm: 1700 mm: 2850 mm: 12780 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 ...
CONTROLS PLC SIEMENS PRESS DESIGN drive system: hydraulic SLIDE total force (nominal): 500 to stroke: 225 mm stroke rate (max.): 60 /minSLIDE (HYDR. PRESS) approximation velocity max.: 200 mm/s working velocity min.: 15 mm/s working velocity max.: 44 mm/s return velocity max.: 200 mm/sCOUNTER RAM nominal force: 100 to stroke: 30 mmV-RING nominal force: 200 toTOOL DIMENSIONS shut height max.: 420 mm ram adjustment: 100 mm distance between columns (H-frame): 880 mm passline opening (free passage in side columns): 470 mm range of transfer pins - in strip direction: 394 mmDECOILER design: cradle sheet width max.: 300 mmLEVELLER UNIT sheet thickness max.: 12 mmSTRIP-FEEDER&nb ...
Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Dimensions: 5545/535/H268 mm -Sheet thickness: 60 mm -Plate: with supporting ribs -Weight: 3000 kg
Key data: 1 t, 110 mm
Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or hand release, without UVV Fully functional, can be visited under power
Jessinegg + Urban, Stroke 300, Lift: 300, table 450x370, 1300kg
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
Key data: 25 t
Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg
: neu : ca. 4 Monate ab Auftragse : Italien : 218000 €: 400 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 4000 mm: 2600 mm: 20500 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.900 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HESSE+CO GesmbH
