Used HUNDEGGER Speed Cut SC1 Fast cutting machine for various long components. Optimized cutting, drilling, milling, etc. Automatic feeding and execution. Various processing units including tools, as can be seen in photos. - Year of construction 2005 - Immediately available - more photos & video available - Dismantling and loading included - Tools as seen in photos, included. - Separate leftover piece conveyor belt not included.
Available from Dec.26, a used Hundegger K2 industry 650, built in 2020.. TOP as good as new... sale as seen without warranty and guarantee from location. Without dismantling more details on your request. Please include your name, address and email address in your request.
CURRENTLY I can offer you this HM 4 Industry planer from Hundegger. FREE Dec. 26 The high-performance plane from Hundegger! A used HM 4 planing machine from HUNDEGGER HM-400 2008 with the entire mechanization to the left and right of the HM4 planing machine for 16 m of timber lengths, as shown in the photos. 4 x 11KW planing motors. 4 x bevel unit. Fully automatic cross-section measurement Sale as seen from site in assembled condition without warranty and guarantee, without dismantling. Price 69,000 euros net
Description Free at the end of the year - 1 used PICK and FEED System - HUNDEGGER Fully automatic wood feeding by 1 complete PICK & FEED conveying system from Hundegger Incl. a vacuum overhead crane system in the system With separate control panel Lengths from 2 to 16 m Widths from 100 mm to 680 mm Thicknesses from 60 mm to 300 mm Regular service can be verified New Update 26 from Hundegger installed! Facility available from approx. Dec 26 / Jan. 2027 Sale from the location in Germany as seen without warranty and without dismantling NEW PRICE 678.000 Euro net
1 used MINT ABA of Hundegger type SC 480 Speedcut year of construction end of 2023, available end of 2026, full equipment.. the customer receives subsidies and also wants to order another unit from above from Hundegger, so this system is now free. SUPER opportunity.. Sale as seen without warranty and guarantee, but of course fully functional. More details on your request. Please enter your name, address and email address.
-A fully overhauled HUNDEGGER Speedcut SC2i – BJ. 2008 : - Feed cross conveyor 5 strands. - 5 axle saw. - Vertical combi : 1 x 4 axis turret cutter, 1 x drill rig 2.2KW, 1 x finger tiller 5.5KW. - Combi Horizontal : 1 x Drill 2.2KW - 1 x marking device from below. - Conveyor belt under the machine for disposal to the rear. - Preparation for airborne dust extraction (tube in the machine cabin. Immediately ready for loading. We recommend the construction and commissioning only by Hundegger.
I am selling an automatic CNC machining center for BLOCK-HOUSE production Hundegger K2i built in 2011. Almost new machine. Built in 2015. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360° rotation, servo-hydraulic inclination 0–65° Universal 5-axis unit with round milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm Positioning and clamping of the workpiece by means of gripper arms. While the workpiece is measured and transported to the d ...
Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional sc ...
Carpentry machine Hundegger k2 625 5 axis year 2003
1 used K1 carpentry machine overhauled by Hundegger in 2020 with full equipment 4-axis system, machine in one piece 18 m long and weighing approx. 15 t. Max. wood cross-section that can be processed: 300 mm x 450 mm With dovetail cutter and much more. IMMEDIATELY available, system set up and ready for demonstration. With all used tools to the system Sale as seen from location Germany without warranty. Payment immediately upon receipt of the invoice without deduction. The price is without disassembly, loading, packing, customs fees, transportation, etc. Machine is fully functional. More details will be available on your request.
HUNDEGGER K2 COMPLETE UNDUNDANCY SYSTEM BUILT IN 2000
This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details.
Wood production line manufactured in 2006. This HUNDEGGER K2-4-450 features a maximum log length at infeed of 13 m and at outfeed of 12 m. The machine includes a fully automatic beam turning station and various cutting and drilling units for versatile operations. If you are looking to get high-quality timber framing capabilities, consider the HUNDEGGER K2-4-450 machine we have for sale. Contact us for further details.
This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine.
