Manufacturer:
(Category: 102)
The HARDINGE GS42 is a CNC lathe for the precise turning of hardened surfaces Reason for sale: Order lost before complete start of production ONLY 598 h Control: FANUC Oi-TF max. rotary Ø: 284 mm max. circumferential Ø: 457 mm Max. speed: 6,000 1/min Spindle bore: 42 mm Turret with 12 stations (VDI 30) (not driven) PERFORMANCE PLUS package - Linear glass scales for X and Z axes - Spindle cooler - Heat exchanger for motor and spindle. High-pressure coolant system, cooling by turret (20 bar) Heavy duty running tip VOP40P Complete System (Precision transducer)
: neu : Bulgarien : 122250 €: 2310.53 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 M: 5 - 1000 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 8550 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 107 770,00 turning length2.000 mm € 112 550,00 turning length4.000 mm € 130 160,00 turning length5.000 mm € 141 250,00 turning length ...
Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, worm type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Max. stroke ...
Index MS 16C, CNC-Mehrspindelautomat, - single-NCU mit PCU, HSP Einzelantrieb, - INDEX-Steuerung SolutionLine, - Farbbilschirm 47 cm, - Signalleuchte Smartligth mit LED, - EG-Konform CE-Zeichen, max. Spindeldurchlass 16 mm, Schlitteneinheit 1.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 1.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.2, X-Achse NC-gesteuert, Z-Achse starr, Schlitteneinheit 6.1, Z-Achse NC-gesteuert, Schlitteneinheit 6.2, X-Achse und Z-Achse NC-gesteuert, - ...
turning diameter over bed: 710 mmturning dia. over face-slide: 420 mmturning length: 2000 mmcontrol: Manual Plus 3110 Heidenhainspindle bore: 92 mmmain spindle speeds:: 16 - 1800 U/mincross movement: 385 mmspindle head DIN 55027 - Size: 11 spindle diameter in front bearing: 140 mmpower capacity at 100 % load: 22,00 kW: 2750 Nmfeed x/z-axis: 1 - 5000 mm/minrapid traverse X-axis: 6,00 m/minrapid traverse Z-axis: 8,00 m/mintailstock quill taper MT: 5 quill stroke: 210 mmdiameter of quill: 110 mmtotal power requirement: 40,00 kWweight of the machine ca.: 5,60 tdimensions of the machine ca.: 5,00 x 3,00 x H2,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 44400 €: 848.04 €: 500 mm: 1500 mm: 250 mm: 80 mm: 300 mm: 400 mm: 8 : 80 M: 21 : 20-2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7,5 kW: 3100 mm: 1250 mm: 1400 mm: 2820 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm € 46 190,00 turning length3.000 mm € 5 ...
Key data: 290 mm, 1270 mm
For sale is a lathe Harrison Alpha 400 with Fanuc control. Machine is ready for use and can be viewed under power
Control Siemens SINUMERIK 840D, C200-4D Speed 6000 1/min Travel X/Y/Z 280/280/145 mm- Number of revolvers: 1 with 6 seats Number of tool positions: 2x4 Conveyor Pallet Conveyor Belt Palettes
Control Siemens 828D - ShopTurn Rotary diameter. [mm] 395 Turning length [mm] 450 Main spindle: Belt spindle technology Speed 4,500 rpm Power (max.) 20 kW Torque (max.) 169 Nm Bar passage 67 mm Workpiece Clamping 3-Jaw Chuck, Samchully MH-208BVI Tool carrier I (X/Y/Z): Technology Turret with 12 stations Tool holder BMT55 Tool drive 5,000 rpm, 9.3 kW, 44 Nm Travel in X/Y/Z 235/105/580 mm Rapid traverse in X/Y/Z 24/10/30 m/min Tailstock: Technology NC-controlled tailstock with servo drive Quill ø 65 mm Cone MT5 Travel in Z 580 mm Equipment/accessories: Chip Management Chip Conveyor Coolant management IKZ pump with oil skimmer and high pressure, 10 bar Tool Measurement Automatic Measuring Arm, Marposs Raw material feed interface bar feeder prepared Precast Removal Parts Catcher with Collection Box Setup operation Electronic handwheel Tool holders Div. rigi ...
Control Fanuc 15-T Rotary diameter. [mm] 260 Turning length [mm] 530 Main spindle: Belt spindle technology Speed 4,200 rpm Power (max.) 15 kW Bar Passage 52 mm Workpiece Clamping 3-Jaw Chuck, Kitagawa B-208 Tool carrier (X/Z): Technology Turret with 12 stations Travel in X/Z 160/590 mm Rapid traverse in X/Z 12/15 m/min
Control Okuma OSP7000L Rotary diameter. [mm] 340 Turning length [mm] 250 Main spindle: Motor spindle technology Speed 4,500 rpm Power (max.) 22 kW Bar passage 65 mm Workpiece Clamping 3-Jaw Chuck, Kitagawa B-210 Tool carrier I (X/Z): Technology Turret with 12 stations Tool holder VDI40 Travel in X/Z 260/640 mm Rapid traverse in X/Z 15/20 m/min Tool carrier II (X/Z): Technology Turret with 8 stations Tool holder VDI40 Travel in X/Z 140/615 mm Rapid traverse in X/Z 15/20 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant Management KSS Pump Tool Measurement Automatic Measuring Arm Further equipment transformer
: 0554 mm: 2000 mm: : 277 mm: 104 mm: 400 mm: 2000 U/min : D1-11 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 420 mmturning diameter over slide rest: 215 mmcentre distance: 750 mmcentre height: 210 mmhollow: 52 mm3-jaw chuck: Röhm Ø 250 mmspindle turning speed range: 31 - 1600 U/minconnected load: 7,5 kWdimensions: ca. 2050x1350x1250 mmnumber of spindle speeds: 18 weight of the machine ca.: 1,5 t- Multifix steel holder- Rotary chuck guard- Work light- Chip guard- chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- incl. some tool holders- incl. live driven tool holder- Full C-Axis 360.000- Chip conveyor- Problem on Turret Revolver live tools
Tacchi HD3/140L CNC Schwerdrehmaschine mit Fräsfunktion. Jahr 2001. Gebaut für große Durchmesser, lange Wellen und anspruchsvolle Schruppbearbeitung mit zuverlässiger Präzision. Mit 95 kW Spindelleistung, einem Schwingdurchmesser über Bett von 2.000 mm und 8.000 mm zwischen den Spitzen bietet die Tacchi HD3/140L Kapazität und Steifigkeit für den kontinuierlichen industriellen Einsatz.Diese gebrauchte HD3/140L bietet die Kraft und Stabilität, die Sie für starke Schnitte, überzeugende Oberflächenqualität und weniger Rüstzeiten benötigen. Die 3-Bett-Konstruktion und die 1.400 mm Bettbreite erhöhen die Steifigkeit. Die volle C-Achse mit 360.000 Positionen und ein 22 kW Fräskopf ermöglichen vollständige Bearbeitung in einer Spannung, wodurch die Taktzeit und Handhabung reduziert werden. Käufer, die nach einer gebrauchten HD3/140L suchen, profitieren von der bewährten Zuve ...
Lathe Mazak Integrex E500 BJ 2021
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 107970 €: 2040.63 €: 800 mm: 2000 mm: 400 mm: 315 mm: 560 mm: 560 mm: 318 M: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6100 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix in ...
turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmbar capacity: 56 mmturning speed range: 25 - 2000 U/minspindle nose: A2-6 total power requirement: 4,0 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: LBH ca. 2,5 x 1,2 x 1,8 mIncludes 4-jaw chuck 200 mmIncludes 3-jaw chuck RÖHM 200 mmIncludes Multifix quick-clamping system with 3 cassettesIncludes coolant pump with reservoirIncludes various turning tool holdersIncludes various small parts and centersThe electric motor is a bit loud and should be re-gilled if necessary.Otherwise, the gearbox runs quietly and the guides have no grooves, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 475 / 260 mmturning length: 1000 mmcontrol: Heidenhain Manual Plus turret head: 12 x VDI 30 total power requirement: 25 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,51,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2022 : 1672 : prompt, Zwischenverkauf v : Bulgarien : 27700 €: 1 : 1 : 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 M: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgDEMO MACHINE / MINT CONDITIONdriven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultisuissewith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to &q ...
This Lealde TCN-0 was manufactured in 1988. A robust horizontal turning machine, it represents a reliable option for precision turning operations. Contact us for more information about this machine.
This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information.
This 3-axis Okuma L300 E-M was manufactured in 2012. It features live tools and an ASA8 spindle, with a generous distance between points of 1000mm. Ideal for those looking to enhance their horizontal turning capabilities. Contact us for more information about this machine.
This 3-axis HAAS ST-20Y was manufactured in 2022, featuring X-axis travel of 213 mm, Y-axis travel of ±50 mm, and Z-axis travel of 571 mm. It includes a spindle bore of 64 mm and a three-jaw chuck diameter of 210 mm. The machine offers a maximum spindle speed of 4000 rpm and comes equipped with a chip conveyor, tool measuring probe, and a hydraulic tailstock. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information.
This MAS MASTURN 550 was manufactured in 2010. It features a swing over bed of 550 mm and a maximum turning diameter of 500 mm. The spindle supports a speed range up to 3000 rpm, and its equipped with a HEIDENHAIN MANUAL plus 4110 control system. If you are looking to get high quality turning capabilities consider the MAS MASTURN 550 machine we have for sale. Contact us for more information.
This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information.
This FAT TUR SMN 710 was manufactured in 2024. A robust horizontal turning machine featuring a swing diameter of 710 mm, carriage swing of 450 mm, and a turning length of 3000 mm. It is equipped with a Sinumerik One 15 touchscreen control. Consider the opportunity to buy this FAT TUR SMN 710 horizontal turning machine. Contact us for more information.
This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information.
WTS Maschinenhandels GmbH & Co. KG
