Manufacturer:
(Category: 102)
turning diameter: 400 mmturning length: 650 mmcontrol: Siemens 840D SL x-travel: 275 mmz-travel: 700 mmspindle turning speed range: 4000 U/minspindle bore: 65 mmturret (x-stations): 16 Pcs. VDI30 tailstock quill taper MT: 4 swing dia.: 600 mmTools speed: 5000 U/mintotal power requirement: 37 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: LBH 2,5 x 1,6 x2,0 m- C-axis- 3 driven tools- 4-jaw chuck (Röhm, 250 mm)- Renishaw measuring arm- Chip conveyor- Interface for bar loader- Siemens ShopTurn- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mmspindle bore: 75 mmbar capacity: 65 mmturning speed range: 6.000 U/minturning length: 508 mmtravel -z axis: 560 mmtravel -x axis: 210 mmturret (x-stations): 24 control: FANUC 0i Smart Plus Touch c-axis: 0,001° 0total power requirement: 23 kVAweight of the machine ca.: 3,8 tdimensions of the machine ca.: LTH 2,9 x 1,7 x 1,8 mPower-on hours = 9,723 hrsProcessing time = 2,158 hrs- 24-station tool turret, driven tools at 6,000 rpm- Workpiece catcher- RENISHAW measuring probe, automatically swiveling- Sub-spindle- Chip conveyor- Coolant pump- Magazine equipped with static tools, including 2 driven toolsAccessories:Includes SAMSYS Multi3000 short-bar loaderIncludes collet chuckIncludes 38 colletsIncludes 210 mm power chuck with various jawsIncludes 130 mm power chuck for sub-spindleIncludes 2 x driven tool holders (radial + axial)Includes 10 static tool holdersIncludes ...
Control Fanuc 16-TC Max. turning diameter 20 mm Spindle speed 10,000 min-1 8-fold revolver with antr. Wkz. Linear slides (3 operated stations) Pick-up spindle (indexing 15°) C-axis main spindle Chip conveyor Extinguishing system Bar loading magazine FMB Turbo 3-26/3200
Turning length: max. approx. 1000 mm, centre height: approx. 250 mm, with coolant device, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm
turning diameter: Ø 2000 mmturning length: 3500 mmturning dia. over face-slide: 1500 mmtotal power requirement: 28 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 10 x 3 x 3 mNo. 4944RAVENSBURG K 66 - 3500 (4350)Working range: Sph.1050x Spw.3500 (4350)Drive: 28 kWFaceplate Ø 1500 mmTailstockBed extension 700 mmRoller support Ø 150 - 1400 mmsteady restLathe Ø 2000 / 1500Spindle bore 90 mmSpeed range 0.6 - 250 min-1Space requirement approx. 10 x 3 x 3 mWeight approx. 22 tons20 % discount for ex-works deliveryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis Okuma LB200-MW was manufactured in 2006. It features a tool turret with 12 positions and driven tools, providing versatility for various machining tasks. The machine has a spindle bore of approximately 42 mm and includes optional equipment such as a chip conveyor and coolant tray. If you are looking to get high-quality turning capabilities, consider the Okuma LB200-MW horizontal turning machine we have for sale. Contact us for further details.
This 4-axis STAR MICRONICS SR20 was manufactured in 1998. It features a FANUC Series 16-T control unit and includes an IEMCA Bar Feeder for enhanced productivity. The machine is operational and in good condition, with occasional faults in the hydraulic system. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR20 swiss type turning machine we have for sale. Contact us for further details.
Mazak Slant Turn 35 Ø 460 x 1000 mm CNCSwing over bed: 460 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 1028 mm Max cross travel X-axis: 335 mm Spindle cone: A2-6 Dia of spindle bore: 80 mm Power on the spindle: 18,5 kW Number of speeds: 4 > 2200 rpm Command: Mazatrol T32-3 Weight: 5 ton ACCESORIES: Chipconveyor Chuck: Kitagawa Toolchanger: yes Number of tools: 16x
A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible
Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2022. This Okuma GENOS L2000-e features a maximum turning diameter of 220 mm and a turning length of 500 mm. It is equipped with a spindle power of 15 kW and a spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L2000-e machine we have for sale. Contact us for further details.
CNC Vertical Lathes, (2) DOOSAN V400, - CNC Control Model: Fanuc i-series, - Spindle Nose: ASA 8, - Max. Turning Diameter: 500 mm, - Max. Turning Length: 450 mm, - Main Spindle Speed: 3,000 RPM, - First Turret Tool Stations: 12, - X-Axis Travel: 265 mm, - Z-Axis Travel: 490 mm, The machines can be inspected under power at our warehouse in Gussago (BS), Italy., Mimu Macchine Utensili
Conventional turning machine GRAZIANO SAG 14 - 180 x1000 mm, The Graziano SAG 14 is an Italian-made centre lathe, renowned for its high rigidity, precision, and long-term reliability; it features a natural gap, allowing for the machining of large-diameter workpieces near the headstock., Height centres: 180 mm, Distance between centres: 1000 mm, Bed width: 280 mm, Swing over crosslide: 220 mm, Spindle nose cam-lock din55029: 5 , Spindle speed: 40-1500 giri/1, Number of spindle speeds: 12, Spindle bore: 51 mm, Taper of quill mt: 4, Tailstock quill diameter: 4 Kw, Spindle motor power: 50 mm, Approx net weight: 1.400 Kg, Accessories: Self centering chuck, quick change tools turret
centre height: 280 mmcentre distance: 1000 mmturning diameter over bed: 570 mmturning diameter over slide rest: 340 mmturning length: 1000 mmspindle head: A8 DIN55027 spindle diameter: 120 mmspindle bore: 83 mmtorque: 1600 Nmturning speed range: 1-2500 (2 Stufen) U/minworktool system: Multifix C face stroke: 340 mmrapid power traverse in X-and Z direction: 5 / 10 m/minfeed Z / X: 0,001 - 20 m / Ufeeding dorce: 10000 / 7000 Ntailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock quill taper ISO: MK 5 total power requirement: 15 kWWeight: 3550 Kgdimensions of the machine ca.: 3,85 x 2,30 x 1,80 mWEILER D3 Control Unit (SIN810D),Three-Jaw ChuckMultifix C Steel Holder,Chip Conveyor,Various Interchangeable JawsMULTIFIX C Quick-Change Steel HoldersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 1000 mm, 2500 1/min
Control: Name: Siemens 840 D Travels: x-travel: 382 mm // z-travel: 1080 mm Technical data: • Speed range 20-2500 rpm • Turning diameter 500/600 mm • Turning length 1000 mm • Spindle bore 136 mm • Rod diameter 121 mm • Torque 2200 Nm • Automatic hydraulic bezel • 12-fold tool turret
Mori Seiki NT 5400 DCG - 1800 SZYear of manuf. : 2009 Control : Fanuc 30i (MSX-711) Turning diam. : 920 mmTurning length : 1800 mm____________Description:In General:Year of manufacture:2009Control system:Fanuc 30i (MSX-711)Max. turning diameter:920 (470) mmTurning length:1,800 mmBar capacity:103 mmMilling spindle:8,000 rpm, HSK 100Main spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Sub spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Tool carrier I (X/Y/Z/B):Technology:Traveling column with milling spindleMilling spindle:8,000 rpmPower:30 kWTorque:302 NmTool holder:HSK 100X-axis:1,040 mmY-axis:510 (+/- 255 mm) mmZ-axis:1,940 mmB-axis:+/- 120°, index 1°Tool carrier II (X/Z):Technology:Cross slide with tool turretTool drive:6,000 rpm, 40 NmNumber of stations:10X-axis:267 mmZ-axis:1,8 ...
This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.
turning diameter: 800 mmturning length: 2000 mmcontrol: MONFORTS control: Control System MTC-K centre height: 400 mmcentre distance: 1970 mmswing over bed: 830 mmswing diameter over slide rest: 540 mmspindle bore: 135 mmface slide travel: 450 mmspindle turning speed range: 2 - 1600 U/mintransmission ratio: 4 feed power X/Z axis: 11,3 / 23,9 kNrapid traverse X-axis: 4 m/minrapid traverse Z-axis: 6,8 m/mintailstock quill diameter: 125 mmtailstock quill stroke: 200 mmtailstock taper MT: 6 total power requirement: 53 kVAweight of the machine ca.: 6 tdimensions of machine L x W x H: 4,35 x 2,17 x 2,10 mAccessories: 3-jaw chuck 630 mmø, MULTIFIX head D, various tool holders, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 560 mmturning length: 2000 mmcontrol: Heidenhain ManualPlus swing diameter over face slide: 340 mmspindle turning speed range: 1-2500 U/minspindle bore: 63 mmrapid travel - longitudinal/face: 10 / 7 m/mintailstock quill taper MT: 5 tailstock quill diameter: 70 mmtailstock quill stroke: 160 mmmain drive motor: (100 / 60 % ED) 15 / 20 kWmax. torque on the spindle: max. 1800 Nmmax. workpiece weight -without tailstock: 500 kgmax. workpiece weight between centres: 1000 kgweight of the machine ca.: 3,6 tdimensions of the machine ca.: 5,5 x 2 x 2 mEquipment: CNC-control Heidenhain Manual Plus M 3-jaw manual chuck Multifix tool holder 3 steady rests Coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max.working dia. 550mm. max. working length 2500mm. P motor 15Kw, weight of lathe 15 ton
max.working dia.above the carriage 650 mm. ,max.working length 4000mm., max.working weight 16 ton., P motor 36 kW, weight of lathe 46 ton
vertical CNC turning center, year 2008, CNC OSP-P200L. Used machine. More info & price on IndustrialBuyer.
2018 CITIZEN BNA-42S2 CNC Swiss-Type Automatic Lathe Machine Specifications Manufacturer: Citizen Model: BNA-42S2 Year of Manufacture: 2018 Machine Type: CNC Swiss-Type Lathe Chuck Size: 5” Maximum Spindle Speed: 5,000 RPM Spindle Motor Power: 5.53 HP Maximum Bar Capacity, Main Spindle (SP1): 42 mm Maximum Bar Capacity, Sub Spindle (SP2): 34 mm Standard Machining Length: 100 mm Number of Spindles: 2 Draw Tube Diameter, Main Spindle (SP1): 43 mm Draw Tube Diameter, Sub Spindle (SP2): 30 mm Rapid Traverse Rate, X1 Axis: 20 m/min Rapid Traverse Rate, Z1 Axis: 20 m/min Rapid Traverse Rate, B Axis: 20 m/min Live Tool Motor Power: 2.8/1.0 kW Live Tool Torque: 16 Nm Equipment and Accessories Edge Patriot 551 Bar Feeder Chip Conveyor Parts Catcher Parts Conveyor Live Tooling Sub Spindle Y-Axis 5-Axis Machining Capability Medium-Pr ...
This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2000. This GILDEMEISTER NEF 320 features a robust control system by HEIDENHAIN. If you are looking to get high-quality turning capabilities, consider the GILDEMEISTER NEF 320 machine we have for sale. Contact us for further details.
turning diameter: 275 mmturning length: 900 mmcontrol: TRAUB TX8i Main- opposite spindle: spindle passage: 65 mmpower capacity at 100 % load: 25,20 kWpower capacity at 40 % load: 30,20 KWmax. torque at 40% / 100% load: 180 / 135 Nmspindle turning speed - stepless: 1 - 5.000 U/minspindle diameter in front bearing: 110 mmC-axis: 1 - 500 U/minworktool support: No. 1 x-axis: 290 mmy-axis: 165 mmz-axis: 600/950 mmB - axis: 360 °rapid traverse X/Y/Z: 18 / 18 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNnumber of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mmtoolpiece turning speed range: 8.000 / 2.000 U/minpower capacity at 25 % load: 5,80 kWmax. torque at 25% load: 4x18,6 / 4x74 Nmtool taper: TRAUB Ø60 worktool support: No.2 / No.3 / No.4 x-axis: 170 mmz-axis: 600/950 mmy-axis: +/- 60 mmrapid traverse X/Y/Z: 18 / 15 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNtool turret - number o ...
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1.000 € 
