Manufacturer:
(Category: 102)
DOOSAN LYNX 220A CNC lathe was built in 2010 in South Korea by Doosan Infracore. The machine, designed for precision machining of workpieces with a maximum diameter of 510 mm, ensures high accuracy and repeatability of the produced parts for many years of intensive use. The machining process is performed by means of a spindle driven by a high-powered motor. The spindle rotates at a maximum speed of 6000 rpm and operates in two axes, X and Z, with feed of 175 mm and 330 mm respectively. It is supported by a three-row angular contact ball bearing at the front and a single-row cylindrical roller bearing at the rear, which reduces the impact of thermal distortion of the front end and improves the machining precision at high speeds. The DOOSAN LYNX 220A features a 12-position turret with a large 210 mm diameter cam clutch and a 39 kN hydraulic clamp. The turret’s rigid design ensures sta ...
A CNC slant bed lathe Focus is offered. Swing diameter over bed: 600mm, max. turning diameter: 330mm, max. turning length: 669mm, spindle bore: 88mm, spindle speed: 3400rpm, travel X/Z: 260mm/762mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, tool stations: 12, tool holder: VDI40, quill diameter: 85mm, tailstock taper: MK4, controls: Siemens. Weight: approx. 5700kg, machine dimensions: X/Y/Z: approx. 3600mm/1800mm/1800mm. Inspection possible by appointment.
CONTROLS CNC controls SIEMENS BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 number of c-axes: 2 WORKING RANGE TURNING turning diameter (max): 100 mm worpiece length max.: 150 mmMAIN SPINDLE spindle revolutions (max): 6000 /minTOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 7000 kgATTACHMENTS (TURNING) hydraulic system: yes European CE standards: yes Machines in good condition:- Integrated pick-up automation- Two EMAG machines configured in a line are for sale.- A robot destacking unit with 100% parts inspection can also be purchased.
: neu : Bulgarien : 58370 €: 1103.19 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: 120 : 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3600 mm: 1500 mm: 1650 mm: 3110 kgIn contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.driven by variable speed control (3 steps)3-axes digital readout Fagor with CSS (constant surface speed)quick change toolp ...
This 5-axis DMG MORI CLX 450 TC + Robo2go was manufactured in 2021. It features a swing diameter over bed of 500 mm, a turning diameter of 400 mm, and a maximum turning length of 1100 mm. The machine includes a powerful milling spindle with speeds up to 12,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 TC + Robo2go machine we have for sale. Contact us for further details.
turning diameter: 370 mmturning length: 424 mmcontrol: MSX-711-IV Mori Seikiswing diameter: 370 mmX1- Axis: 380 mmX2- Axis: 155 mmZ1- Axis: 460+155 mmZ2- Axis: 610 mmy-axis: +/- 105 mmB - axis: +/- 120 °bar material dia.: 65 mmspeed spindle max.: S1 5.000 / S2 6.000 U/min.spindle bore: S1/S2 65/38 mm: 12000 1/mintool taper: Capto C5 toolpiece magazine: chain magazine: 76 Stücktool turret with 10 work positions: total power requirement: 45 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: 2,71 x 2,43 x 2,40 mMAPPS control systemRenishaw HPRA (manual tool presetter)Blum Laser ControlDirect measuring system X,Y,Z,BCollet chuck SMW Autoblok KSZ-MB-040-Z140Workpiece conveyor beltBar feeder Breuning Irco ILS-RBK-10012Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 barChip conveyor ConSep 2000The data for this ad was created with ModulMWS - the softwar ...
turning diameter: 200 mmturning length: 393 mmcontrol: MSX 853 weight of the machine ca.: 3,5 ttotal power requirement: kWdimensions of the machine ca.: mMSX 853 cnc control3-jaw chuck diameter 210mm12-fold revolverC-axisdriven toolstail stockcoolant devicechip conveyorTechnische Daten: / technical detailsDrehdurchmesser / turning diameter 200 mmDrehlänge / turning lenght 393 mmX-Weg / X-travel 160 mmZ-Weg / Z-travel 450 mmmax. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpmEilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mmAntriebsleistung Spindel / drive capacity spindle 13,5 kWGewicht ca. / weight ca. 3500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of ...
Horizontal turning machine manufactured in 2019. This HAAS ST 15 features a maximum cutting diameter of 356 mm and a cutting length of 406 mm. It includes a 12-station VDI turret and a hydraulic chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST 15 machine we have for sale. Contact us for further details.
This 10-axis CMZ TTL66 turn-mill centre was manufactured in 2025. It features a maximum swing diameter of 800 mm and a maximum turning diameter of 515 mm. The machine is equipped with twin spindles and twin Y-axis turrets, allowing for simultaneous 4-tool machining capability. If you are looking to get high-quality turning and milling capabilities, consider the CMZ TTL66 machine we have for sale. Contact us for further details regarding this machine.
turning diameter: max. 356 mmturning length: 705 mmcontrol: MSX 850 III MAPPS Mitsubishigreates pass round over bed: 923,8 mmSwing dia. over traverse guideway: 755 mmstandard turning dia.: 275 mmMain spindle:: max. spindle speed: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A2-8 spindle bearing diameter: 140 mmspindle bore: 91 mmmax. bar capacity: 80 mmchucking diameter: 305 mmC-Axis: 0,001 °Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle nose: JIS A2-5 spindle bearing diameter: 85 mmspindle bore: 43 mmchucking diameter: 210 mmC-Axis: 0,001 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Shank diameter: 26 mmDrill shank diameter: 50 mmSpindle speed - driven tool stations: max. 6.000 min -1turret change time: 0,25 sec.axis stroke:: x-axis: 260 mmz-axis: 795 mm ...
Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg
turning diameter: 210 mmturning length: 700 mmcontrol: Okuma OSP-E 100 L total power requirement: 35,7 kVAweight of the machine ca.: 7,1 tdimensions of the machine ca.: 2660 x 2000 x 2330 mCNC turning and milling center with C-axis and Y-axis,2 turrets, and subspindle.CNC control: Okuma OSP-E 100 LMaximum turning diameter: 210 mmSwing over bed: 400 mmDistance between spindle noses: 960 mmMain spindle:Spindle bore: 53 mmSpeed range: 50 to 6000 rpmMotor power: 11/7.5 kWSubspindle:Spindle nose: JIS A2-6Speed range: 38 to 5000 rpmMotor power: 11/7.5 kWZ-axis:Travel: 700 / 700 mm (ZA + ZB)Rapid traverse: 40000 mm/minW-axis:Travel: 940 mmRapid traverse: 40000 mm/minX-axis:Travel: 167 / 192 mm (XA + XB)Rapid traverse: 30000 mm/minY-axis:Travel: 92 mm (+50/-42 mm)Rapid traverse: 15000 mm/minC-axis:Indexing: 360° x 0.001°Rapid traverse: 400 rpmDisc turret:2 x 12 stationsTool holder mount: VDI 3 ...
Offer 26083 Technical data: - Center height / center width 210 / 1500 mm - Largest rotary, Ø over bed / over face slide 420 / 270 mm - Largest turning diameter with removed bridge 640 mm - Length of the bed bridge approx. 270 mm - Spindle bore 58 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 45 - 1800 rpm - Feeds - longitudinal 0.031 - 1.70 mm/rev - Flat 0.14 - 0.784 mm/rev - Travel of the upper slide 128 mm - Face slide travel 285 mm - Metric thread pitches - Inch thread - Drive 400 V / 7.5 kW - with: - tailstock, 3-jaw chuck, quick-change steel holder, - Digital display - Space requirement approx. W 2850 x H 1500 x D 1200 mm - Weight approx. 2000 kg
turning diameter: 250 mmswing diameter: 250 mmturning height: 250 mmControl: Siemens Sinumerik 840 D total power requirement: 60 kWweight of the machine ca.: 9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mmturning length: . mmcontrol: Mazatrol 640 T x-travel: 190 mmy-travel: 1000 mmz-travel: 575 mmturning speeds: 4000 U/minfeed: 30 m/minnumber of tools: 12 bar loader: nein total power requirement: 18,5 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: 5600x2100x2200 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Mo ...
turning diameter: 280 mmturning length: . mmcontrol: Mazatrol 640 T x-travel: 190 mmy-travel: 309 mmz-travel: 330 mmturning speeds: 4000 U/minfeed: 30 m/minnumber of tools: 12 bar loader: ja total power requirement: 24 kvAweight of the machine ca.: 3,5 tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the soft ...
This 7-axis Maier ML 26 C1 was manufactured in 2000. It features a maximum bar diameter of 26 mm and an impressive spindle speed of 8000 rpm. The machine includes 5 turning tools and 3 axial drilling tools, along with a bar feeder model Iemca Boss 322r-E. If you are looking to get high-quality turning capabilities, consider the Maier ML 26 C1 swiss type turning machine we have for sale. Contact us for further details.
Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.
Expanded to Ø 36 mm 6 spindles KADIGO Tool Monitoring with bar feeder IEMCA PRA 52/42 F (4m - poles) Accessories
6 spindles KADIGO Tool Monitoring with bar feeder IEMCA PRA 52/42 F (4m - poles) Accessories
SAEILO SJ-660/3300 Lead and pull spindle lathe Year of construction 2015 3-axis digital display K&C ARBAH-L Center width 3,300 mm max. tip height 330 mm Turning diameter over 660 mm Turning diameter over face slide 438 mm Bed width 400 mm Spindle mount DIN 55029 - Camlock - size D1-8 Spindle bore 82 mm Spindle speed range 15 - 1,500 rpm, 12 steps Equipment: Four-jaw chuck approx. 300 mm Bezel Coolant Setup Multifix clamping system Machine Light Technical data & installation plan – see PDF. All technical information, illustrations and content are non-binding and without guarantee. Subject to changes, errors. All other accessories visible in the pictures and video are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. ...
The largest diameter of the workpiece mm. 4000 The largest diameter of the workpiece above the caliper mm. 3200 Maximum length of workpiece mm.20000 Main motion motor power kW 160 Largest tonn part weight. 160 Machine tonn weight. 314...
Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg
Hardinge GS42 CNC Lathe Year of construction 2017 Fanuc Oi-TF CNC Control Bar passage 42 mm Main spindle 6,000 rpm 12-speed tool turret Tailstock Hydraulic chuck Machine weight approx. 2,800 kg Only approx. 600 operating hours Very neat condition Ready to use
A CNC universal lathe is available. Swing diameter over bed/facing slide: 680mm/465mm, max. turning diameter: 465mm, max. turning length: 1050mm, travel X/Z: 300mm/1050mm, rapid traverse: 20m/min, speed: 3250rpm, tool positions: 12, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3300mm/1950mm/2500mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible.
Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement.
Swing diameter over bed/facing slide: 330mm/260mm, max. turning diameter: 200mm, max. turning length: 450mm, travel X/Z: 160mm/450mm, rapid traverse: 30m/min, speed: 5000rpm, tool stations: 12, tool holder: VDI30, max. workpiece weight: 100kg. Machine dimensions X/Y/Z: approx. 3300mm/1750mm/2400mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible.
Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details.
turning diameter: 570 mmturning length: 2000 mmcontrol: num + CNC Keller centre height: 280 mmturning dia. over face-slide: 365 mmspindle bore: 62 mmspindle turning speed range: 3 - 2500 U/minspindle head: DIN 55 027 Gr. 8 cutting speed: Konstant 1 - 9999 m/minfeed in x - axis: 0,01 - 50 mm/Ufeed range Z-direction: 0,01 - 50 mm/Urapid travel - longitudinal/face: 10 / 5 m/minfeed power: x-Achse 7100 Nfeed power: z-Achse 12.500 Ntravel of cross-slide: 345 mmupper slide travel: 125 mmbed width: 360 mmtailstock quill diameter: 80 mmtailstock quill stroke: 190 mmtailstock taper MT: 5 max. workpiece weight -without tailstock: 400 kgmax. workpiece weight between centres: 1000 kgmax.workpiece weight:each extra steadyrest: 300 kgthreading metric: 0,1 - 400 mm/Stg.dimensions of machine L x W x H: 3,98 x 1,87 x 1,81 mtotal power requirement: kWweight of the machine ca.: tAccessories: 3-jaw ch ...
