Manufacturer:
(Category: 104)
STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...
MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm
Tool grinding machine Jungner US-2305 Table: 1020 x 114 mm, clamping surface: 625 x 114 mm Distance between centers: 305 mm Work piece diameter: 225 mm Travels: -X: 350 mm -Y: 90 mm Spindle motor: 0,55 kW Spindle speed: 3400 / 5000 / 6700 rpm
Center height: 180 mm Grinding diameter: Ø 290 mm Distance between centers: 1000 mm Lots of equipment
Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels
clamping diameter: max. 17,5 mmgrinding spindle speed: 4500 U/minrelief angle: max. 45 °total power requirement: 0,55 kWweight of the machine ca.: 120 kgdimensions of machine L x W x H: 0,54 x 0,47 x 1,31 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...
Surface grinding machine Make: LECHLER Model: 500 x 150
grinding diameter: 250 mmgrinding length: 600 mmcentre height: 125 mmgrinding wheel diameter: 500 mmgrinding wheel width: 80 (100) mmbore: 203,2 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmworkpiece spindle swivable +/-: 360 °grinding head swivellable +/-: 0 °grinding spindle speed: U/min: 0-9,99 mm/Ø: 0-9,99 mm/Øtable swivelabel +/-: 10 °longitudinal feed of the table: 700 mmtable speeds: 0,02-6 m/min: 130 kgmax. workpiece weight -without tailstock: 130 inkl. Spannung kgcross travel: 270 mmtailstock quill taper MT: 3 quill travel: 30 mmtotal power requirement: 5,5-7,5 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: mAs the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your mach ...
-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging
grinding length: . mmgrinding width: . mmworkpiece height: . mmtotal power requirement: 146 kWweight of the machine ca.: 140 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: max. 630 mmgrinding width: max. 200 mmworkpiece height: . mmx-axis: max. 250 mmy-axis: max. 710 mmdistance spindle center to table: max. 500 mmtable surface area: 0,25 mmtable load: max. 1,1 ttable speed -stepless-: 2 - 18 m/mincross feed autom.: . dust exhaust: 0,25 kWcoolant pump: 0,09 kWtotal power requirement: ca. 4,5 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 2400 x 1600 x 1900 mmAdjustmentsY axis: 1 scale value = 0.005 mmZ axis: 1 scale value = 0.002 mmManual adjustment (within the range of 250 mm of the Y axis): 80 mmSpeeds:automatic cross feedAdjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke,- continuous: 0 - 4 m/minGrinding wheel Ø max. 200 mmGrinding wheel bore: 51 mmGrinding wheel width: 20 mmDiamond dressing unitDigitaldisplay for 2 advertisement vertical infeedThe data for this ad was created with ModulMWS - the sof ...
width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 100 x 915 mmwork table:: 225 x 155 mmtotal power requirement: 0,44 kWweight of the machine ca.: 0,018 tdimensions of the machine ca.: 0,56 x 0,26 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...
Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters
used
May SS80 U Machine can be visited by arrangement under power
Prior sale reserved - errors possible Internal Reference Number: D-1143-3
Prior sale reserved - errors possible Internal Reference Number: D-1143-2
grinding wheel diameter: 315 mmgrinding wheel width: 40 no. of working stations: 2 Stückspeeds: 1745 U/minvoltage: 380 Vtotal power requirement: 1,1 kWweight of the machine ca.: 230 kgdimensions of the machine ca.: 0,85 x 0,45 x 1,05 mS/N: 48817The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.
Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg
grinding diameter: 350,450 mmgrinding length: 600 mmcentre height: 175,225 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±10 °longitudinal feed of the table: 900 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 3,1 x 2,0 mAs the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and withwarranty, but we can also offer you the service for your machines.Foto von bereits gelieferter Maschine mit eventuell anderen Op ...
grinding diameter: 5 - 255 mmgrinding length: 300 mmcentre height: 130 mmgrinding length at plunge grinding: 50 mmcontrol: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/minwork piece spindle speed: 0 - 500 U/minfeed of grinding spindle slide cross: 0 - 5000 mm/mintable speeds: 0 - 5 m/mingrinding wheel diameter: 450 mmtotal power requirement: 10 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,65 x 2,2 x 2,35 mAccessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition
! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages
Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, ...
Manufacturer Producer Saacke Typ type UW2 CNC Year of construction Construction year 1989 Steuerung control Sinumerik Machine size machine size 3500x3000x2500 mm Spannung Voltage 400 V Machine weight machine weight approx. 2.5 t
Grinding range: 400 x 200 mm Magnet table: 400 x 175 mm Height adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm. Equipped with: - Coolant device - Band filter - Hydraulic system - Operating instructions Country of origin: Germany Motor power: 1.5 kW Machine LxWxH: 2200 x 1500 x 2100 mm Machine Weight: 1100 kg
Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg
With matching spacer rings according to photos. Scope of delivery according to photo 1.
