Manufacturer:
(Category: 104)
grinding diameter: 350 mmgrinding length: 1500 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: 3 tdimensions of the machine ca.: mOverhauled and modernized machine-DRO in x and z-axis-New BEMA tailstock with 0,1mm cylinder compensation-Park position for the tailstock-New automatic switch off when diameter is reached-Automatic switching from rough to finish grinding-Finish grinding feed electrical infinitely variable from 0-100%-Modernized infeed handwheel like on the new machines-swiveling operator panel-Splash doors -coverd x-axis with possibility to set an exhauster on top-New internal grinding device like on the new model-new hydraulic aggregate-New electric cabinet-Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt.E ...
Total length with gutter for cooling liquid mm 15000 Overall width mm 11380 Overall height mm 5780 Grinding width mm 2500 Clamping surface of the table mm 4500х2240 Distance between columns mm 2680 Maximum length of grinding mm 4000 Grinding length at table speed 1-40 m/min Grinding height mm 1250 Number of T-shaped slots pcs. 9 Distance between T-shaped slots mm 36 H 12 T-slot width mm 8x250 Workpiece weight kg 40 000 Machine weight kg 125 000
Ref. -No.: 10332Manufacturer: GEORG MüLLERYear of construction: 1969Type of control: KonventionellControl: N/AStorage location: HalberstadtCountry of origin: GermanyMachine length: 1200 mmMachine width: 800 mmMachine Height: 1800 mmGrinding height: 120 - 200 mmMax. Grinding length: 310 mmGrinding Width: 175 mmTotal Power Requirement: 2,8 kWWeight Of The Machine Ca.: 0,4 tGrinding head adjustment (vertical): 165 mmMax. grinding head infeed: 12 mmmagnet clamping surface: 250 x 150 mmGrinding wheel dimensions: 170 x 100 x 76 mmGrinding spindle - speed: 2850 RPMGrinding spindle drive: 2,2 kWDrive motor power: 380 V
Ref. -No.: 10316Manufacturer: TOSYear of construction: 1996Type of control: KonventionellControl: n/aStorage location: HalberstadtCountry of origin: SlovakiaMachine length: 3450 mmMachine width: 2236 mmMachine Height: 2000 mmWeight Of The Machine Ca.: 4,4 tGrinding wheel: 260 mmTable Dimensions (Lengthxwidth): 1500 x 400 mmHeight of grinding with new grinding wheel (without magnetic plate): 500 mmGrinding wheel fx width x bore: 350 x 40 - 80 x 127 mmWidth of the composite grinding wheel: 200 mmMax. load on the work table: 5000 NTable surface: 400x1000 / 1500 mmMax. distance of the spindle axis: 675 mmMax. length of grinding: 1000/1500 mm
Ref. -No.: 10301Manufacturer: TITANYear of construction: 1990Type of control: KonventionellStorage location: HalberstadtCountry of origin: USAMax. Grinding length: 1.500 mmMax. Workpiece Weight: 300 kgGrinding Diameter: 350 mmMax. Dia. Of Grinding Wheel: 280-500 mmGrinding Wheel Width: 80-100 mm
Ref. -No.: 10265Manufacturer: PROTHType of control: KonventionellStorage location: HalberstadtCountry of origin: TaiwanSerial no.: 0011G-05 Max. Grinding length: 600 mmGrinding Width: 300 mmWorkpiece Height: 312 mmTravel X: 700 mmTravel Y: 340 mmgrinding wheel dimension: 355 x 25 x 127 mm
Ref. -No.: 10235Manufacturer: VIOTTOYear of construction: 1985Type of control: KonventionellControl: N/aStorage location: HalberstadtCountry of origin: ItalySerial no.: 1024 Further information:disc grinder
Ref. -No.: 10233Manufacturer: DISKUSYear of construction: 1973Type of control: KonventionellControl: N/aStorage location: HalberstadtCountry of origin: DeutschlandSerial no.: 6984 Weight Of The Machine Ca.: 3 tFurther information:Discuss - surface grinding machine
Ref. -No.: 10159Manufacturer: KELLENBERGERYear of construction: 1974Storage location: HalberstadtCountry of origin: SchweizGrinding Length: 1000 mmGrinding Diameter: 250 mm
Ref. -No.: 10120Manufacturer: BRIERLEYStorage location: HalberstadtCountry of origin: DeutschlandWorkspace: 2,5- 32 mm
Grinder Schaudt BHU 40A Swing diameter: 400mm Center distance: 630mm The technical data can be found in the pictures. approx. transport dimensions and approx. weight: 3.5m x 2m x 2m, 3,500 kg Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is in pristine condition. You can make an appointment for a viewing at any time. We'd love to hear from you.
Technical data of the Favretto TU 500 Grinding: Max grindable length: 5000 mm Max grindable width: 1500 mm Max grindable height: 1300 mm Passage between uprights: 1530 mm Load capacity: 4500 kg Approximate weight: 20000 kg Voltage: 380 V Approximate installed power: 60 kW Grindstone: Normal dimensions: 500x203 mm Thickness: 100 mm Rotation speed: 1400 rpm/1' Steerky transverse feeds: 1 to 10 mm/stroke Transverse displacements adjustable continuously: from 0.1 to 6 m/1' Table: Useful dimensions of the support surface: 1200x5000 mm Continuously adjustable speed: from 2 to 30 m/1'
Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.
Continuous rotary table HAU R60-1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800 mm, 3 polishing units with 7.5 kW each, polishing shafts 50 mm diameter, max. polishing wheel width 2 x 400 mm + 1 x 280 mm, max. polishing wheel diameter 420 mm, motorized longitudinal and height adjustment – machine equipped with complete. Application system for liquid polishing paste More pictures on request
Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.
TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...
• Grinding chamber with gradation for large individual parts • Dimensions: 3400 x 3750 x 2400 mm • Performance: Long sanding belts 5500 x 100 mm
max. grinding diameter: 238 - 620 mmgrinding length: 190 mmworkpiece length: 380 - 940 mmspindle turning speed - stepless: 2 - 12000 U/mincurrent capacity: 380 kVApower capacity - grinding motor: 1,1 kWtotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tMechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189400 V, 50 Hz, with CEE plug and cableColour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustmentMachine like new Accesories: Sk 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with setting gaug ...
Machine Details Stock-No. 1105-03893 Type of machine Surface Grinding Machine - Horizontal Make CANTALUPPI Type 2100 x 450 Year of manufacture 1975 Type of control conventional Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details grinding length 2100 mm grinding width 450 mm workpiece height 650 mm table surface area 2200 x 750 mm distance table - spindle center max. 600 mm table speeds 1 - 25 m/min Cross Feed Autom. 1 - 60 mm/stroke grinding wheel size 400 x 100 x 76 mm grinding wheel speeds 1450 rpm total power requirement 15 kW Additional information Accessories: Magnetplate, 2100 x 400 mm, grinding wheel with flange, draw-off Device.
grinding length: 900 mmgrinding width: 510 mmworkpiece height: 400 mmtable surface area: 800 x 400 mmlongitudinal feed of the table: max. 980 mmtable speed -stepless-: 1 - 35 m/mingrinding wheel size: 355 x 51 x 127 mmcross feed of the table: 460 mmcross feed: 1 - 40 mm/Hubvertical feed autom.: 0,005 - 0,04 mm/Hubrapid traverse vertical: 0,5 m/mingrinding spindle speed: 1450 U/mingrinding spindle drive: 5,6 kWtable load capacity: max. 1000 kgtotal power requirement: 10 kWweight of the machine ca.: 4,4 tAccessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m
max. grinding diameter: 238 - 620 mmgrinding length: 190 mmworkpiece length: 380 - 940 mmcurrent capacity: 380 kVApower capacity - grinding motor: 1,1 kWspeeds of grinding spindle: 2 - 10.000 U/mintotal power requirement: 2,2 kWMechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: Machine and accessories completely overhauled with CE marking400 V, 50 Hz, with CEE plug and cableBASICMACHINE!built of year 1988 / overhauled in 2023Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light graymotorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw connecti ...
max. grinding diameter: 238 - 620 mmgrinding length: 190 mmworkpiece length: 380 - 940 mmspindle turning speed - stepless: 2 - 10000 U/mincurrent capacity: 380 kVApower capacity - grinding motor: 1,1 kWtotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tMechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice:We would be happy to make you a free offer. However, please understand that weonly process inquiries with complete address details.1218 400 V, 50 Hz, with CEE plug and cableColour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustmentAccessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables ...
NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg
NC – controlled precision rotary table surface grinding machine with horizontal grinding spindle and transverse slider - brand new Rotary table diameter 1,000 mm Largest grindable diameter 1,150 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 800 kg Circumferential grinding wheel Ø 450/203 mm x W 80 mm Highest workpiece height with new grinding spindle 700 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 14.7 kW Rotary table drive power 5 kW Torque 30 Nm Weight approx. 15,000 kg
