Manufacturer:
(Category: 104)
G&N Kugelmüller MPS 1 -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Drive motor 0.6KW -Coolant device -Machine enclosure Dimensions; LxWxH 0.8x0.7x1.6Meter / Weight 150Kg Errors / input errors excepted Hjbsvtrr Tjkn Au S Tol
Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg
Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol
G&N Kugelmüller MPS 1 Cup Grinder -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Year of construction 1996 -Drive motor 0.6KW -Machine enclosure -Well-maintained original condition Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150Kg
Mass finishing machine / WALTHER CC315 incl. control system -Model CC315 -Speed range 945-1445 rpm -Separate control/on/off/timer etc. -Soundproof cover -Waste water cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850Kg
JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles
Surface Grinding Machine ELB SWB06-VAII -Grinding length 600mm -Grinding width 500mm -Spindle speed 1400/2800 rpm -Z - Delivery / Automatic / Manual -Y - Delivery / Automatic / Manual -Grinding Movement / Automatic / Manual - Magnet size 600x500mm -Automatic delivery -Grinding wheels - Pulling device -Grinding wheel diameter max. 300mm -Coolant device -Drive cable approx. 6 KW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3500Kg
ELB - SWN 5 VA II Surface Grinding Machine -Grinding range X/Y/Z 525x375x255mm -Magnetic plate 700x300mm -Table clamping surface 900x250mm -Table longitudinal stroke 10-625mm -Table load max. 280Kg -Table feed 1-30 m/min -Pendulum grinding 3-30 m/min -Distance - table to spindle center 525mm -Vertical feed speed 2-180 mm/min - Feed size - adjustable 0.001-2mm -Grinding wheel speed 3000 rpm -Coolant device -Machine feet -Documentation -COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 meters / Weight 3500Kg
dimensions: 410 x 410 x 860 mBase unit for a Müller swing-arm grinding machine with electrical cabinet. Inside are motor protection switches, fuses, 16 A sockets, etc. The electrical components are shown in photo no. 2.The grinding machine was sold without the base unit at the buyers request. Thebase dimensions are 300 x 300 mm. With modifications, the base unit can be used for any similarly sized machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre distance: 2.500 mmcentre height: 250 mmgrinding wheel diameter: 600 mmTotal travel of the grinding support: 320 mmspindle speeds: 50 - 450 mmtool adaptor: MK5 tail stock: MK Cylindrical Grinding Machine | NAXOS-UNION - W-500the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation).The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: W-500-2500 | W500 | W 500 | W 500 2500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Parpas RUAP 700 was manufactured in 2000. A used cylindrical grinding machine, fully reconditioned and in excellent condition. Features include Siemens Sinumerik 840C control, 700 mm distance between centers, and a maximum workpiece diameter of à 360 mm. If you are looking to get high-quality grinding capabilities, consider the Parpas RUAP 700 machine we have for sale. Contact us for more information.
This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 Ã 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details.
This 4-axis DANOBAT HG 91-3000-B8 was manufactured in 2007. It features a CNC control system by SIEMENS 840 D, a maximum grinding length of 3,000 mm, and can handle workpieces up to 5,000 kg. The machine offers a swivel angle from -30º to +180º and a cutting speed of 45 m/s. Consider the opportunity to buy this DANOBAT HG 91-3000-B8 cylindrical grinding machine. Contact us for more information about this machine.
This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine.
grinding diameter: 390 mmgrinding length: 650 mmcentre height: 200 mmtotal power requirement: 46 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 3x3x2,4 mUniversal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mmEMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers theright solution for virtually every user.--> Technical data Max. grinding length: 650 mm--> Centre height: 200 mm--> External grinding diameter: 1 – 390 mm--> Max. weight flying MK4: 100 kg--> Max. workpiece weight between centres: 250 kg--> Feed:--> X-axis travel: 480 mm--> Z-axis travel: 1.150 mm--> Workpiece headstock--> Tailstock--> Grinding spindle headstock--> Coolant device, manufacturer HYFRA,--> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012,--> Oil mist filter, ...
Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible.
Grindable diameter from 2 - 40 mm. Smallest and largest point angle: 40 – 180 °. For right- and left-hand cutting tools, 1-12 cutting edges. For sharpening twist drills, step drills, taps. Accessories and an instruction manual are provided.
grinding diameter: - mmgrinding length: - mmcentre height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
internal diameter: 5-200 mmgrinding depth: 250 mmspindle stock travel: 180 mmspindle bore: 50 mmturning speed range - spindle: 120-1000 U/minweight of the machine ca.: 3 tdimensions of the machine ca.: 2.4 x 1.25 x 1.75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool diameter: 18 mmadjustability of the setting guage: 130 mmmax. dia. of grinding wheel: 100 mmweight of the machine ca.: 0.15 tdimensions of the machine ca.: 0.55 x 0.4 x 1.11 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FANUC Power Mate hydraulic: . grinding length: 800 mmgrinding width: 400 mmdistance spindle center to table: 650 mmtable speed -stepless-: 30 m/mingrinding wheel size: 350 x 50 x 127 mmweight of the machine ca.: 3.5 tdimensions of the machine ca.: 3.3 x 2.3 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000m ...
Color: RAL 7035 light grey, RAL 7012 basalt grey, RAL 5012 blue grey, the machine’s inverter is defective. Accessories: electromagnetic clamping plate 400x250mm, with pole pitch 5mm and holding force control, automatic vertical infeed with infeed program and digital display for vertical and cross movement, automatic central lubrication system, wet grinding unit with paper belt filter system for filter paper 460x200mm with filter fineness 0.016–0.025mm, electric wheel dresser with dimensional compensation and operating manual. An on-site inspection is possible.
CNC surface and profile grinding machine Control: DGT-Plus, Siemens Working area: Max. grinding length with table true running 1100 mm Max. grinding width 550 mm Grinding height (table-bottom edge grinding disc) 450 mm Table clamping area 1000 x 500 mm Table-speed 1/40 m/min Table load (without magnetic plate) 1200 Kg Table load (with magnetic plate) 975 Kg Grinding spindle: Three-phase current motor spindle 11 kW Grinding disc (outside x width x bore) 406 x 152.4 x 100 mm Revolutions 1400 Longitudinal axis (z-axis): Rapid movement 5 m/min Adjustable feed 1/50 mm Step-less adjustable feed 0/2000 mm/min Min. delivery 0.001 mm Working area 500 mm Total stroke 645 mm Vertical axis (Y-axis): Rapid movement 1.5 m/min Min. delivery 0.001 mm Working area 610 mm Total stroke 645 mm Space requirement: L x W x H 4450 x 2935 x 2540 mm Total weight: about 670 ...
grinding length: 1000 mmcentre height: 175 mmb-axis: 1 °max. dia. of grinding wheel: 500 mminternal grinding spindles: 60000 U/Minc-axis: 0.001 °weight of the machine ca.: 5.7 tdimensions of the machine ca.: 4.25 x 2.2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Workpiece diameter range: 2mm-320mm, max. grinding length: 500mm, center distance: 1000mm, max. workpiece weight: 150kg. On-site inspection is possible.
A used manual tool grinding machine from Saacke is offered. Table size X/Y approx.: 850mm/145mm, travels X/Y/Z approx.: 450mm/250mm/250mm, center height approx.: 125mm, max. grinding length approx.: 500mm, machine dimensions X/Y/Z approx.: 1500mm/1100mm/1500mm, weight approx.: 850kg. Inspection by appointment possible.
Twist Drill Bit Grinding Machine DAREX SP 2500 -Grinding diameter 1.5-26mm -3x tool holders -1x spare grinding wheel -Machine substructure -Documentation Dimensions: LxWxH 0.5x0.5x1.6 meters / Weight 80Kg
Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible.
grinding length: 600 mmgrinding width: 400 mmworkpiece height: 375 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGewartet und Längsachse neu eingeschabtGlasmaßstäbe in der Senkrecht- und der Quer-AchseSchleifscheine 300/50/76,2 mmMagnetspannplatte 600x400mm mit HaftkraftregelungUniversal-Papaierfilterautomat UPF100 mit 280l Tankinhalt.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
