Manufacturer:
(Category: 101)
High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg
Multi-spindle head, multi-spindle drill head, drilling gear-Multi-spindle head recording drive: MK4-Max. Number of drill heads: 9 pieces-Number of cardan shafts: 4 pieces with MK1 mount-Take drill: MK1-Largest drilling pattern Dimensions of the drill: 280 x 280 mm-Multi-spindle heads: are variable tools-for various processing: such as drilling, tapping, countersinking, reaming,-with which several holes: can be machined at once-Dimensions: 330/330/H515 mm-Weight: 36 kg
Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 13x drill bits -Recording: M10 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 410/100/H100 mm -Weight: 8 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve-Adapter sleeve: Morse taper sleeve MK6/5-Type: IMFCM6/5STAS2293-65-Dimensions: Ø 65/190 mm-Weight: 2.2 kg
Axis control, electronic handwheel, control unit-The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available.-electronic handwheel for Hitachi Seiki type: HC400-Dimensions: 170/120/H80 mm-Weight: 0.6 kg
quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert, interchangeable inserts-Quick-change sleeves: 12 interchangeable inserts-Design/Size: Ø 12/14/18 mm, see photos-Art.No.: 22069-12.0 / 22075-14.0 / 22090-18.0-Price/Delivery: complete-Total transport dimensions: 300/245/H70 mm-Weight: 3.9 kg
Key data: 90 mm, 1250 mm, 900 mm
Inv. Num. : 9038 Type: W 9 Producer: TOS Generated: Parameters: Work table length: 950 mm Work table width: 950 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle diameter: 90 mm Equipment: DRO (3 axes) Rear support column Clamping angle Tools
CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000
CNC Vertical Machining Center "KUNZMANN BA 1000 SK" With track control Heidenhain iTNC 530 Year of Make: 2013 Travels: X 1020 Y 620 Z 920 Speed range: 1 – 14,000 rpm infinitely variable With the following accessories: Rigid angle table 1200 mm x 610 mm clamping surface NC Attachment Rotary Table WALTER 0 500 mm B Axis Swivel Head (Torque Drive) + 30 / - 120 degrees Vertical tool changer with 40 magazine positions ( SK 40 ) 3 D Probe Heidenhain Electronic handwheel Fixed full protective cladding with interior lighting IKZ plant Coolant Setup Oil mist extraction Chip conveyor Operating instructions
CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions
High Speed Bench Drill, Made in Germany -Clamping table: 290 x 225 mm -Travel distance: 150 mm with hand crank -Spindle mount: Drill chuck included -Drilling capacity in steel D 1 - 6 mm -Projection: 180 mm -Speeds: 900 - 10,000 rpm 8 steps -Column: Diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Voltage: 380 V -Dimensions: 640/330/H740 mm -Weight: 92 kg
Key data: 1800 mm, 800 mm, 600 mm
5 Axis Machining Center Manufacturer: Hedelius Type RS805 Year of construction 2012 Control Siemens 840D Shopmill 3D Formingstar Travels X Long operation 1800mm angle table x 1020, rotary table x 675mm Pendulum operation 675/675 Y 800mm Z 600mm IKZ 40bar Tool holder SK40 Coolant tank 900 litres Standby Magazine 190Tools Machine is in a used very good condition, without maintenance backlog. All information without guarantee. you are also welcome to contact me by phone Mon - Fri from 8.00 - 17.00 also Whatsapp.
Key data: 1016 mm, 610 mm, 710 mm
Control Heidenhain ... TNC 530 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 710mm Spindle speed ... 0-10000 rpm controlled axes ... 3 IKZ ISO 40 Magazine spaces ... 24 Machine weight ... 5500kg
Manufacturer QUASER Model MV204IIU / 10 Year 12/2002 CNC HEIDENHAIN ITNC530 3 work tables / pallets Table 1 Size Ø280 mm. Table 2 Size Ø 500 mm. Table 3 Size 600×400 mm. Weight allowed on table 265 kg Min-max distance on table 150-760 mm. Axles Travels (X/Y/Z) 700/590/480 mm Tilting head movement range (A-axis) ±110º Axis Positioning A 0.001º Table Rotation (C-Axis) 360º C-Axis Positioning 0.001º Fast Forward Axles (X/Y/Z) 32,000 mm/min Maximum Working Advance (X/Y/Z) 15,000 mm./min. Head Head Speed 10,000 r.p.m. BT-40 Head Cone Main engine power 15/33 kW Par 192/189 Nm. Charger Tools No. of Positions in Tool Loader 32 RANDOM tool change system Maximum tool length 280 mm. Maximum tool weight 7 kg Other Equipment Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Coolant tank capacity 280 l. Refrigeration electrical cabinet INCLUDED Clea ...
A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.
Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 360 mmTABLE table surface (left-right): 820 mm workpiece load (max): 500 kgSPINDLE / HEAD spindle revolutions (max): 24000 /min tool fixture: HSK A50 AXIS DRIVES rapid traverse: 75000 mm/minTOOL MAGAZINE number of positions: 24 AUTOMATIC WORKLOAD EQUIPMENT workpiece manipulator: articulated robot store type: table changer number of store positions: 2 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 7700 kgATTACHMENTS guideway covers: yes central lubrication system: yes chip conveyor: yes coolant unit: yes closed cabin: yes European CE standards: yes - Shuttle table machine- Knoll (KSS) ...
Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.
Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.
Key data: 800 mm, 900 mm, 650 mm
Double-spindle machining center with swivel beam for mounting tension bridges Spindle spacing 800 mm Spindle speed up to 12,500 1/min Power 10% - 40% - 100% ED = 42 / 35 / 28 KW Torque 10% - 40% - 100% ED = 200/ 165/ 135 Nm Tool changer 2 x 42 tool positions Tool holder HSK 80 Rapid traverse 120 m/min - CNC control Siemens 840 Dsl - Central coolant facility
Control Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes
Manufacturer DMG Model DMU 50 eVo linear Year 2008 3D CNC control HEIDENHAIN iTNC 530 Table NC Rotary Table INCLUDED Table surface 500×380 mm. Maximum weight on table 500 kg Table rotation (C-axis) 0.001º (±360º) Oscillation field (B-axis) 108º Direct Measurement System INCLUDED Routes and advances Longitudinal travel (X-axis) 500 mm Cross travel (Y-axis) 450 mm Vertical travel (Z-axis): 400 mm X-axis fast feed 80,000 mm/min Fast forward Y-axis, Z 50,000 mm/min Fast forward B, C axes 18,000 mm/min Number of Controlled Axles 5 Head Head speed 18,000 r.p.m. BT-40 Head Cone Main Motor Power 30 kW Equipment Automatic tool loader INCLUDED No. of positions in tool loader 30 Internal cooling 40 Bar INCLUDED Coolant tank with paper filter INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel Others Total installed power 52 kVA Machin ...
The machine is in good technical condition, testing is possible by prior arrangement.
spindle diameter: 130 mmx-axis: 4000 mmy-axis: 2100 mmz-axis: 1500 mmw-axis: 700 mmspindle taper: BT 50 spindle turning speed range: 2500 U/minspindle drive: 22 / 26 kWtable surface area: 1600 x 2000 mmtable load: 12 tB-axis (table): 0,001 °feeds longditudinal/cross/vertical: 5000 mm/minrapid motion -longitudinal/cross/vertical: 15 / 12 / 15 m/minControl: Fanuc 0i MF total connected load: kWweight of the machine ca.: 35 tdimensions of the machine ca.: 7,5 x 6,7 x 4,5 mEquipped with:- FANUC 0i MF (10.4” LCD)- Data Server + AICC II- ATC for 60 Tools (BT 50)- X/Y/Z axis THK roller linear guide way- X/Y/Z axis Haidenhain linear scales- Coolant thru spindle 40bar- Spindle oil cooler- Hydraulic cooler- Air conditioner- Chip conveyorOperating Hours: 14761hCutting Hours: 4382hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling Ø to: 30 mm Spindle holder: MK 3 Quill stroke: 120 mm Table clamping surface: 335 x335 mm Table swivels horizontally: 360° Table adjustment via hand crank approx.: 550 mm Largest distance between table and drilling quill: 550 mm Largest distance between machined base plate and drill quill approx.: 1120 mm 12 spindle speeds: 160 - 930 rpm Drive motor: 380 V, approx. 0.8/1.3 kW Space requirement: 900 x 470 x 1780 mm
Drill diameter: 65mm, outreach: 380mm, tool holder: SK50, speed: 1600rpm, table dimensions X/Y: 630mm/500mm, rapid traverse Z: 4750mm/min, drilling capacity steel/cast iron: 65mm/80mm, thread cutting capacity steel/cast iron: M68/M72, machine dimensions X/Y/Z: approx. 1500mm/1200mm/2950mm, weight: approx. 2000kg, control: PLC. Including three tool holders, safety enclosure, minimum quantity lubrication system, spare parts and digital readout. Without milling head attachment and drill crown. The control cabinet has optical damage. Documentation available. An on-site inspection is possible.
x-travel: 1300 mmy-travel: 1300 mmz-travel: 1300 mmControl: Siemens 840D SL table-size: dia. 800 mmtable weight: 1500 Kgc-axis: 360 / 0,0001 °number of spindle speeds: 10000 U/min/rpmtool taper: ISO 50 spindle drive: 40 / 52 kWrapid travel x/y/z: 50 m/minTools changer: 199 pos.dimension of workpiece: 1400 x 1120 mmtotal power requirement: 42 kVAweight of the machine ca.: - tdimensions of the machine ca.: 11,9 x 6,1 x 5,2 m4-axis BAZequipped with:- CNC control Siemens 840D Solution Line- pallet changer with 4 pallets (dia. 800mm)- rotary table (B axis)- tool changer 199-fold (SK 50)- coolant system- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Machining Center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of Make: 2008 Travels: X-axis 1,800 mm Y-axis 510 mm Z-axis 480 mm Clamping surface: 2x 1,000 x 510 mm Pendulum operation: 2 x 700 x 510 Mount: SK 40 Tool magazine: 20 times Spindle speed Celox spindle: 50 – 12,000 rpm Accessories - 3D Formingstar Pack - 3D Heidenhain touch probe - Chip conveyors - Partition wall - LTA suction - Water tank high-pressure pump 20 bar - Machine hood
