Manufacturer:
(Category: 101)
Postions on ATC: 30 A-axis: +30° ~ -120° C-axis: 360° Table rotational speed: 30rpm Vices not included! Auction-ID: A1-41492-1
Machine comes with a Tsudakoma RN-250R 4th axis. Auction-ID: A1-41492-2
Machine comes as showed on the pictures. Auction-ID: A1-41492-7
Positions on ATC: 20 Auction-ID: A1-41492-16
Machine is equipped with a 4th axis and tools in turret. Right window needs new glass and limit switch needs repair. Auction-ID: A1-41492-14
Auction-ID: A1-41492-15
Positions on ATC: 20 Auction-ID: A1-41492-18
No vice. Auction-ID: A1-41492-17
Auction-ID: A1-41499-81
Machine is equipped with 4th axis! Auction-ID: A1-41492-13
Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-41268-808
All of the following have been repaired/replaced on each machine over the past year: Complete spindle bearings, X-Y axis ball spindle, Z-axis glass slide, sensors Auction-ID: A7-41500-2
All of the following have been repaired/replaced on each machine over the past year: Complete spindle bearings, X-Y axis ball spindle, Z-axis glass slide, sensors Auction-ID: A7-41500-3
CNC machining center sw ba s 03-12 Type: Vertical machining center (3+2 axes) Manufacturer: Schwäbische Werkzeugmaschinen GmbH (SW), Germany Year of manufacture: 2002 Number of spindles: 1 Spindle speed: 1–17,500 rpm Spindle power: 15.5 kW Torque: 60 Nm Spindle lubrication: Lubrication with minimal amount of oil Spindle taper: HSK 63 Axle Travels (X/Y/Z): 600 / 400 / 400 mm Fast feeds: 1–75,000 mm/min CNC Control: Siemens 840D Pneumatic pressure: 6 bar Installed electrical power: 70 kVA Dimensions (L x W x H): 3.65 x 2.75 x 3.10 m Untested functionality Auction-ID: A7-41005-40
CNC Horizontal Machining Center SW BA 400-2 Type: Two-spindle horizontal machining center Manufacturer: Schwäbische Werkzeugmaschinen GmbH (SW), Germany Model No.: BA 400-2 CNC Year of manufacture: 2001 Machine Number: 164.172 CNC Control: Siemens 840D Spindle power: 18 kW Rated current: 98 A Installed electrical power: 68 kVA Supply voltage: 400 V / 50 Hz Visible accessories: Knoll 400 K-1/1000 chip conveyor Untested functionality Auction-ID: A7-41005-60
with drill chuck, incl. drill bits Auction-ID: A1-41470-31
Auction-ID: A7-40762-5
Travel: - X-axis: 762 mm - Y-axis: 508 mm - Z-axis: 508 mm - B-axis tilt: -35° to +110° - C-axis rotation: 360° continuous - Spindle nose to table: ~102 mm (min), ~610 mm (max) Table / Platter: - Platter diameter: 500 mm - T-slot width: 16 mm - T-slot center distance: 63 mm - Number of standard T-slots: 7 - Max. weight on table (evenly distributed): 300 kg Operating conditions: - Temperature range: 5°C to 50°C Auction-ID: A7-40828-2
All of the following have been repaired/replaced on each machine over the past year: Complete spindle bearings, X-Y axis ball spindle, Z-axis glass slide, sensors Auction-ID: A7-41500-4
Serial Number: M-06503109 • Power: 4×400 V AC, 50/60 Hz, 29 A • Condition: Used • Additional Notes: Equipped with Siemens Sinumerik CNC controller, SMC electro-pneumatic panel (Cabinet-OAL00564, Jan 2008), and PRAGATI ATC 4020V automatic tool changer. Includes Mayfran MT-10 chip conveyor. Auction-ID: A7-41150-25
CNC machining center sw ba s 03-12 Type: Vertical machining center (3+2 axes) Manufacturer: Schwäbische Werkzeugmaschinen GmbH (SW), Germany Year of manufacture: 2002 Number of spindles: 1 Spindle speed: 1–17,500 rpm Spindle power: 15.5 kW Torque: 60 Nm Spindle lubrication: Lubrication with minimal amount of oil Spindle taper: HSK 63 Axle Travels (X/Y/Z): 600 / 400 / 400 mm Fast feeds: 1–75,000 mm/min CNC Control: Siemens 840D Pneumatic pressure: 6 bar Installed electrical power: 70 kVA Dimensions (L x W x H): 3.65 x 2.75 x 3.10 m Untested functionality Auction-ID: A7-41005-100
CNC Vertical Machining Center SW BA S 03-22 Type: Vertical machining center (3+2 axes) Manufacturer: Schwäbische Werkzeugmaschinen GmbH (SW), Germany Year of manufacture: 2005 Number of tables: 2 Table size: Ø 450 x 380 mm Axle Travels (X/Y/Z): 600 / 400 / 400 mm Fast feeds: 1–75,000 mm/min Spindle speed: 1–17,500 rpm Spindle power: 15.5 kW Spindle taper: HSK 63 Automatic tool changer: Yes Chip Conveyor: Yes (Knoll 750 K-1, Year 2005) CNC Control: Siemens 840D Installed electrical power: 70 kVA Pneumatic pressure: 6 bar Dimensions (L x W x H): 3.65 x 2.75 x 3.10 m Untested functionality Auction-ID: A7-41005-1
Drilling spindle holder MK 4, drilling spindle stroke 160 mm, drilling spindle speeds infinitely adjustable with countershaft, speed 65 to 1750 rpm, projection 300 mm, 3 feeds 0.1-0.2-0.3 rpm, table with 2 T-slots 620 x 470 mm, table height-adjustable via rack with hand crank, lighting, coolant system option, drive 400 V 1.4/2.2 kW, space requirement approx. W 620 x H 1900 x D 950 mm, Weight approx. 450 kg Auction-ID: A1-41470-20
All of the following have been repaired/replaced on each machine over the past year: Complete spindle bearings, X-Y axis ball spindle, Z-axis glass slide, sensors Auction-ID: A7-41500-1
Auction-ID: A7-40762-85
Technical data Manufacturer: Friedrich Deckel AG, Munich Model: FP4NC Engine No.: 2838-0301 Table size: 530 × 900 mm T-slots: 8 pieces, 14H7, spacing 63 mm Travel (X / Y / Z): 560 / 500 / 450 mm Quill stroke: 80 mm Max. passage height: 531 mm (spindle nose – table top) Permissible table load: 450 kg Clamping weight: 260 kg Spindle holder: SK40 according to DIN 69871 Speed range: 31.5 – 5000 rpm (two-stage transmission) Feed range: 2 – 5000 mm/min Rapid traverse: 5000 mm/min Drive power: 7.5 kW Coolant tank: 60 litres Coolant pump: 15 l/min, automatic Operating voltage: 380 V / 50 Hz Rated current: 20 / 22 / 24 A Control voltage: 24 V DC / 42–48 V AC Fuse: max. 35 A Connected load: 15 kVA Machine weight: approx. 2650 kg Dimensions set-up: 3.6 × 2.6 m Door passage (min.): 2.8 × 1.8 m Floor load: 3500 kg/m² Auction-ID: A7-40762-55
Auction-ID: A7-40762-69
CNC machining center sw ba s 03-12 Type: Vertical machining center (3+2 axes) Manufacturer: Schwäbische Werkzeugmaschinen GmbH (SW), Germany Year of manufacture: 2002 Number of spindles: 1 Spindle speed: 1–17,500 rpm Spindle power: 15.5 kW Torque: 60 Nm Spindle lubrication: Lubrication with minimal amount of oil Spindle taper: HSK 63 Axle Travels (X/Y/Z): 600 / 400 / 400 mm Fast feeds: 1–75,000 mm/min CNC Control: Siemens 840D Pneumatic pressure: 6 bar Installed electrical power: 70 kVA Dimensions (L x W x H): 3.65 x 2.75 x 3.10 m Untested functionality Auction-ID: A7-41005-20
Auction-ID: A7-40762-82
Machine has already been disassembled and will be delivered without tools and tables Additional information Axles: 4 Max. Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm 4th axis: 360° Fast feed speed: 30 m/min - 12 m/min Tool Positions: 240 Tool holder:BT 50 Big Plus ConSep System Tool breakage monitoring Sizes: Magazine 4600x2000x3300mm Bucket: 1200x1100x2000mm Chip conveyor: 3300x2300x2200mm Auction-ID: A1-40789-15
Surplex GmbH
10.000 € 