We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
used
A Schwabedissen DAZSa23 double-end profiler is available. Working width min./max.: 400mm/1250mm, chain track-cam distance: approx. 405mm, external dimensions at max. working width: approx. 3100mm/2800mm. The machine has 4 swivel motors on each side. On-site inspection is possible.
used
Planer blade sharpening machine Meinert with built-in Cabinet apparatus for gang saws weight approx. 350 kg Built in 1963 L x W x H 80 x 60 x 140 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
- Wide belt sander from IMEAS - Sheets are processed by means of a sanding belt - Year of construction 1968/69 - The entire electrical system and the suction system of the grinding machine were renewed. - This machine also runs without problems. Find more here - / Contact us at -
used
Cutting line - Year of manufacture: ca. 1969 - Manufacturer: Central Adams, Italy - cutting unit lengthwise and crosswise for cutting sheet pressboard - working width lengthwise approx. 2.300 mm - working width cross approx. 4.400 mm - without SPS control, controlled by light barriers, pneumatics and time relays - cutting technology: cutting knives - stepless positioning of the knives along the knife rollers - immersion depth of the knives variably adjustable - Original documentation partly available - dimensions cutting units, feeding table, deflection table, delivery table: 11,0 x 7 m (L x W) Find more here - / Contact us at -
used
Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...
used
Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
tahlkonsole with height adjustable table Table 720 x 500 mm, thickness 8 mm Weight 20 kg Built in 1975 The console is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland
Specifications: Width: 500 mm Length approx.: 5300 mm Make: Unknown Year of construction: 1977
used
A Hymmen ULX universal roller coater is for sale. New roller and conveyor belt were installed on the machine in 2022. Main features: - Working width 1300 mm - Roller length 1300 mm - Passage height 3 - 80 mm - with dosing roller - Application roller diameter 255 mm - Dosing roller diameter 175 mm - Working height 850 mm - Feed speed 8 - 40 m/min. - Operating side left - Was used for applying oil The machine is located in Machern, Germany, and can be inspected and collected there.
Cross conveyor (QFM) for logs and models Distance between axles : 5.0 m Number of strands: 3 pieces Drive power : 7.5kW - Transport by means of heavy link chains and steel sprockets - Steel bearing housing - Driven by a special geared motor - Swivel wheels can be clamped separately - Wear rails on chain carriers - Substructure: Sectional steel construction -uphill - with hipped roof drivers Year of construction 1979 Revision year 2014
Number of arms: 3 pcs. max. lifting capacity: 2 t - with heavy-duty storage arms - Arm lift and adjustment by hydraulic cylinder - Substructure in heavy steel construction Year of construction 1979 Revision year 2014
used
Short-cycle press "Siempelkamp" KT1: Year of construction 1979, numerous optimizations, among others new hydraulics Jg. 2000 Incl. electrics Sale of this unit can only be considered in year 2025 or 2026! Find more here - /
Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014
used
complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.
used
Power 3Kw Speed 2800 rpm Air volume 1000-3500Nm3/h Total pressure difference 1000-400 N/m3 Hdqibj2 Several suction pipes, trouser tubes, etc.
used
Castle admission machine Drilling group, Kettenstemmer, Stulpfraese with turret stop for doors in left-right execution. L x W x H: 100 cm x 60 cm x 220 cm Built in 1982 Weight approx. 400 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Description: Machine number: 8317/82 Cutting length: approx. 150 mmApprox. Onsite Dimension. (l x w x h): 500 x 450 x 1,100 mm, weight approx.: 70 kg
used
Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h -Total pressure: 3500 Pa -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg
used
Short-cycle press "Siempelkamp" KT 2: Coating lines Year of manufacture 1983, numerous optimizations Incl. electrics VP: tbd (disassembly by buyer) Capacity: 1800 L Find more here - /
used
WOOD HER TYPE 1117 built 1983 0.55 / 0.75 kW (380V / 16A plug) 3-rolls (new) 8 speeds 4 / 6 / 8 / 10/ 12 / 15 / 20 / 30 m/min. from location
used
1983 Schelling DAK for coffin production double miter saw Additional description: See videos we are selling two used Schelling double miter saws along with their existing spare parts and conveyor belts. These machines were in daily use until recently when we decided to update our equipment. They are now available for sale. Machine specifications: a. Model: Schelling double bevel saws b. Year: i. Coffins tops 2003 - completely renovated 2015 ii. Coffins lower parts 1973 - completely renovated 2015 c. Machine hours: approx. 38,000 hours d. Capacity: 300 coffins per day / 10 hours per day e. Extraction type and capacity: Fan extraction with a capacity of 55 kW / 36,000 m³/h f. More precise types of machine auxiliary modules: Miter nail cutter (miter joint), lid drilling units for coffin tops and bottoms Wood cutting (wood cuttings) conveyor belts g. Type of readjustment equip ...
used
width 3200 mmPanel feed by chains, chain width 80 mm Feed speed max ? m/min, 4 kWDogs every 11 cm.Equipment:1+1 Jump scorer1+1 Hogger1+1 Jump shaper1+1 Jump shaper1+1 Jump shaper1+1 Jump shaper
used
Pellet mill / press CPM 7900 aftre renovation Dia inch : 30 - 762 mm Die width : 8 - 210 mm Die surface 5025 cm² KW : 250 KW Machine type : 7900 Buildyear : 1984 Width rollers : 215 mm Dia rollers : 350 mm 1 set rollers Oil cooling Twin mixer 2 x 15 KW / Die Hosting system New inlet in stainless steel
used
Manufacturer: Höcker Polytechnik, Type: S 200, Year: 1985, Volumenstrom m3/h: 2850, Fan kW: 3 kW, Year :1985
used
Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) I ...
used
For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.
used
centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow: 3200 m³/h -Inlet connection: Ø 400 mm -Connection output: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg
used
Description: usable length: 4000 mm maximumum width 1300 mm installed power 0,55kW height adjustable Important: ,article is placed at the 2nd floor of the building - a crane handling is necessary to get them downserial number: 61040/12, length: 4,000 mm, width: 1,300 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,600 x 1,000 mm, weight approx.: 400 kg
used
1 pc. woodworking center, Fabr. SCM, Type: 2000 D 7-speed station wagon Circular saw Table: 1040x590 mm, Saw blade max: 250 mm D., Spindle D: 30 mm, Speed: 3000 rpm, Cutting height: 50 mm max. Surface planer Table: 2000x400 mm, knife shaft speed: 4000 rpm Dickte Table: 700x400 mm, Planing height: 200 mm, Feed: 4.5-8 m/min., Max. chip removal 8 mm Table milling machine Spindle 30 mm D., Speed 3000-7000 rpm, Retractable tool 160 mm Slotted Hole Drilling Device Table: 550x300 mm, longitudinal travel 200 mm, transverse travel 160 mm, height adjustment 125 mm, mandrel 16 mm Rolling table Displacement 1000 mm, sliding travel 800 mm Engines Saw 4.0 kw, tiller 3.3 kw., 400 V., 50 Hz Dimensions: 2000x1700x1000 mm Weight: 1020 kg without accessories Special accessories: Finely adjustable milling fence, replaceable spindle, additional table for tenon cutting Fil ...
used
Manufacturer: Nestro, Type: N-300-B ex, Year: 1986, Diameter intake mm: 300, Engine power kW: 2,0, Flow rate approx. m3/h: 4300, rotations rpm: 1405, Direkt drive: yes, Ex-protected: yes, Year :1986