The device allows profiles to be placed on machines such as double miter saws, foiling lines, web machines, feed magazines, machining centres, etc. by one person alone Dimensions: 1200 x 2350 x 1400 mm, 170 kg
Assembly table can be tilted via foot switch with pneumatic cylinder Rotational movement lockable with foot brake Support surface with felt Dimensions basic dimensions: 1500 x 1400 mm, 3100 mm swivelled out Weight: approx. 150 kg
Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. -------------------------------------- Price in this version on request! Plus packaging/shipping Additional prices: --------------------- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugg ...
Clamp length: , mm Clamp width: , mm 0: , Nm Painting aid for painting the sash and glazing bead frame at the same time RU-LH painting aid for glazing bead frames for processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At the 4 corners 1 bracket is placed on each of the glazing bead frames. The positioning is done diagonally and in such a way that the brackets protrude approx. 35 mm from the wood, When pressed into the sash frame, a clamping. The glazing bead frame is ready for painting Positioned at a distance of approx. 20 mm in front of the sash. After drying or before installing the sash the glazing bead frame is flush with the sash pressed and only removed again before glazing. The clamps can then be pulled out again by hand become. Stand frame with support table vertical 85°, adjustable in inclination. 2 pieces compensation frames f ...
A T-connector assembly fixture Ruchser for precise and time-saving installation of T-connectors in window or door profiles is available. Usable length: 6000mm, max. mullion width: 250mm, profile supports: 6, clamps: 4, positioning stops: 4, working height range: 950mm-1100mm, machine dimensions X/Y/Z: approx. 6450mm/1200mm/1750mm. Documentation available. An on-site inspection is possible.
0: , St. Width: 1080 mm Length: 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 2000 mm Working width: 1800 mm Wheel width: 200 mm 4 pcs. roller conveyors 2000 x 200 x 1800 mm for internal and external processing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manual hand unit: Ja J/N Automatic for single pieces: J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L,W): 2000,3000,4000 mm Weight: 100 kg tiltable yes/no: nein nein Assembly glazing and sealing stand with lifting device RU -S1 Stop - and assembly table standing, length 2000 mm, width 700 mm Plant height 1600 mm, lifting device with pneumatic 300-1000 mm, Space than roller conveyor , roll length 200 mm, roller pitch 200mm. Roller conveyor height adjustable 280-350 mm. Contact surface with Felt strips and a height-adjustable rubber roller bar at the bottom to Top . Conditioning grille to protect the edges , left and right respectively one Role as edge protection for elements up to 2500 mm height. Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200 mm, 2 shelf boards, load capacity 300 kg. alternatively : ------------- RU -S2 Stop and assembly table standing . Same as RU -S1 However, length 3000 mm alternatively : ------------ RU- S3 Stop and ass ...
: 1100x1000 mm : 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L,W): - Weight: - tiltable yes/no: - In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm ...
: 21000 mm Working width: 500 mm Wheel width: 500 mm NEW OFFER: 21 m Rollenbahn neu bestehend aus: 7 Einheiten je 3000 mm Länge, Rollenbreite 500 mm, Rollen geteilt , Anschlagseite vertikal mit Röllchen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2000,3000 mm Working width: 200 mm Wheel width: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L,W): - Weight: - tiltable yes/no: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: ja Working width: 3000 (3500) mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L,W): , mm Weight: ca. 90 kg adjustable height (yes/no): ja stroke: 300 - 800 mm surface of working table: 1.700 x 1.500 mm table width: max. 3.800 mm 0: ca. 130 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...
0: 18 St. Depth: 800 mm Length: 2300 mm Height: 1500 mm weight: 90 kg Profile trolley RU-PW1SH One-sided for wooden profiles ------------------------------- Vertical storage and transport of cut wooden profiles Furnishing: -Easy loading and unloading - Sorting combs covered with PVC tube, -Set-up area as a plan board or bar grid floor -Available on one and two sides -Compartment bracket and clamping plate available separately -Mobile on 4 polyamide swivel castors, 2 of which have brakes Technical specifications : RU-PW-1SH 18/100 Length 2,300mm Width 800mm Plant part height 1500 mm subjects 18 Compartment width 100 mm (adjustable) Compartment depth 400 mm Weight 90kg Installation surface made of planboard. With 4 plastic Swivel castors, Ø 150 mm, 2 of which have brakes. ------------------------------- Price ex works plus shipping and packaging: on request ------------------------------- ...
Number of motors: 2 Stück 0: 2380 mm Control: , 0 RUCHSER RU-GL-45° ----------------------------------------------------- Glazing bead saw at the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck right saw on carriage mounted to be moved manually. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000 ----------------------------------------------------- for glazing beads up to 30 ...
Number of motors: 2 Stück 0: 2650 mm Control: , 0 Ruchser RU-GLS-ED 45° glass bead saw -------------------------------------- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. the Machine was designed for cutting glazing beads in pairs with a cutting angle of 45° and features a fixed and a movable saw unit. The manual length adjustment is equipped with an electrical digital display. It can cut lengths from 240mm - 2650mm be sawn. During the cutting process, the glazing beads with a pneumatic clamping device clamped from above and from the front to prevent tilting to prevent the glazing beads. Operation is via a safety two-hand operation Item 1: RU-GLS-ED45° double glazing bead saw ----------------------------------------------------- with manual measurement, for the pairwise Cutting glazing beads, cutting angle ...
0: 2750 mm Working height: 2500 mm 0: 300-1000 mm RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022 ----------------------------------------------------- Vertical work table with lifting device and turning device. Especially Suitable for glazing and sealing wooden windows on both sides. Furnishing: System part covered with felt Infinitely variable pneumatic lifting device, Stroke of 300 mm - 1000 mm, based on roller conveyor height Turning device for sealing on both sides, with roller conveyor 150 mm roll length 2 pneumatic tensioners for clamping the window to the turning device Version with special turning device for pushing through the on the Roller conveyor set up window with applied (closed) turning device Equipment demonstration machine, alternative/optional equipment on request! Pos. 1.0: Item no.: 1000000 RU-SW3-90° vertical work table for Wooden window with ...
Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable f ...
: 3000 Working height: 2500 mm : 300-800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L,W): - mm Weight: - kg adjustable height (yes/no): ja 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Venker Werkzeugmaschinen GmbH
