subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Key data: 700 mm, 400 mm, 500 mm
Photon Energy Workstation XXL II CEPHEUS Mark12 – USP/picosecond laser system For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. The system is particularly suitable for operators of existing Photon Energy / Hitachi systems, medical technology companies, laser marking service providers or companies with a need for UDI-compliant, permanent marking. Key data: Year of manufacture: February 2023 Runtime: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: less than 15 hp Repetition rate: 20 to 500 kHz Cabin dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 axis of rotation available PHOTONmark, PUC / UDI Control, CamVisionPro and handheld scanner available Last ...
Travel paths X/Y/Z: 200 x 100 x 100 mm Cross table
Key data: 500 mm, 350 mm, 300 mm
Technical data: Manufacturer: Mitsubishi Type: FA20 S Advance Year of Make: 2012 Control: Mitsubishi Advance Travel distances X/Y/Z: X 500 mm, Y 350 mm, Z 300 mm Travel U/V: +/- 75 mm Feed rate in X/Y/Z: 1,300 mm/min Conical angle at workpiece width: 15° Max. workpiece dimensions: 1,050 x 800 x 295 mm Max. workpiece weight: 1,500 kg Wire diameter: 0.07 – 0.3 mm Condition Condition: Used Functional: Tested and fully functional
Technical data: Manufacturer: Fischer Type: XMDVM-T7.1-W Year of construction: approx. 2004 Measuring table travels: X 175 mm, Y 175 mm Software: WINFTM Version: 6.31 L-PDM 2014 Condition Condition: Used Functional: Tested and fully functional The granite slab shown in the picture is not an accessory and is not for sale.
Manufacturer: SEYI Year of Manufacture: 2018 Model: SDI-160 Type of Machine: Solid Frame Crank Servo Press Technical Specifications: - Capacity: 160 tf - Stroke: 220 mm - Strokes per Minute: 1 to 60 spm - Die Height: 400 mm - Slide Adjustment: 100 mm - Slide Area: 900 x 580 mm2 - Bolster Area: 1150 x 760 mm2 - Air Pressure: 5 kg/cm2 - Main Motor: 54 KW - Power Source: 400 V, 50 HZ, 30 KVA - Guard Response Time: 13 ms - Braking Time: 147 ms - Guard Distance: 7000 mm - Machine Weight: 19.4 tf - Max. Die Area: 800 x 480 mm2 - Max. Die Weight: 0.5 tf - Operating Hours: approximately 7,000 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: SEYI Year of Manufacture: 2019 Model: SDI-200 Type of Machine: Solid Frame Crank Servo Press Technical Specifications: - Capacity: 200 tf - Stroke: 250 mm - Strokes per Minute: 1 to 50 spm - Die Height: 450 mm - Slide Adjustment: 110 mm - Slide Area: 1000 x 670 mm2 - Bolster Area: 1300 x 870 mm2 - Air Pressure: 5 kg/cm2 - Main Motor: 59 KW - Power Source: 400 V, 50 Hz, 35 KVA - Guard Response Time: 13 ms - Braking Time: 147 ms - Guard Distance: 10000 mm - Machine Weight: 23.7 tf - Max. Die Area: 900 x 570 mm2 - Max. Die Weight: 0.8 tf - Operating Hours: approximately 4,800 hours
Manufacturer: Bordor Year of Manufacture: 2023 Model: P3 Type of Machine: Laser Cutting Machine Laser Source: 6kW Technical Specifications: - Working Area: 3048mm x 1524mm - Max Linkage Speed: 200m/min - Max Acceleration: 4.0G - Table Load Bearing: 1050kg (1-4kw) / 1450kg (more than 6kw) - Machine Overall Dimensions: 8840mm x 2240mm x 2520mm - Overall Weight: plus or minus 6500kg - Z Axis Travel: 350mm - Positioning Accuracy: 0.02mm - Total Power Capacity/Current with 40KW MAX source: 264.6KVA / 402.0A - Total Power Capacity/Current with 30KW MAX source: 204.0KVA / 310.8A - Total Power Capacity/Current with 20KW source: 141.9KVA / 217.1A - Total Power Capacity/Current with 12KW source: 95.1KVA / 144.4A - Total Power Capacity/Current with 6KW source: 60.3KVA / 91.6A - Total Power Capacity/Current with 3KW source: 44.6KVA / 67.7A - Total Power Capacity/Current with 2KW ...
Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-135
- 15 KW-1455 rpm motor. - Fan with a diameter of approx. 800 mm. - Inlet tube diameter approx. 500 mm. - Maximum air flow 9000 m³/h. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-10
table diameter: 360-800 mmautomatic feeds: ja weight of the machine ca.: 5,7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
groove width: 90 mmstroke max.: 710 mmserial number: 17783113240A0 weight of the machine ca.: 1,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre distance: 1100 mm: 840 mm hollow: 80 mm: ja connected load: 18,5 kWdigital: ja multifix: ja weight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. ram stroke: - mmthroat: - mmtable diameter: - mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg
Stock No.: 25372-1 Technical data approx: - Boiler capacity 3000 L - Operating pressure 11 bar - Maintenance opening - Bowl diameter approx. 1150 mm - Space requirement approx. W 1350 x H 3500 x D 1350 mm - Weight approx. 700 kg
Year: 2008 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - cooling installation - cutter quick change system
Key data: 1200 mm, 2000 mm, 1000 mm
IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes transport For sale is a high-precision 3D CNC coordinate measuring machine from the manufacturer Mitutoyo, model Crysta Apex 122010 (Euro-C-Apex), built in 03/2003. The machine offers an extensive measuring volume and is perfect for quality departments that need to certify large housings, welded constructions or precision components. Measuring range (XYZ) - 1,200 x 2,000 x 1,000 mm on a solid, thermally stable granite measuring table with air bearing including original control PC, control electronics and wiring Ready to use Weight: approx. 6,000kg
Gantry milling machine manufactured in 2016. This ISEL ATN Vergusssystem 3 features a robust assembly with X, Y, and Z-axis components, along with a PC control system equipped with a monitor, keyboard, and mouse. The machine offers travel ranges of approximately 220 mm in X, 500 mm in Y, and 150 mm in Z. If you are looking to get high-quality milling capabilities, consider the ISEL ATN Vergusssystem 3 machine we have for sale. Contact us for further details.
100 t (100 Mp per Aufstellplan)ca. 22 t (22 Mp per Aufstellplan)40 t (40 Mp per Aufstellplan)560 mm200 mm720 x 720 mmca 3370ca. 2760 mm240 mm120 ms
Manufacturer: BLM Group Adige Model: LT Fiber Type of Machine: Fiber Laser Tube Cutting Machine Year of Manufacture: 2016 Condition: Works well and is currently in production Operating Hours: 37,169 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Hidroliksan Year of Manufacture: 2022 Model: HSA Type of Machine: Hydraulic Press Technical Details - Capacity: 200 Ton - Power / Motor: 30 Kw - Working Voltage: 380 Volt - Frequency: 50 Hz - Max Current: 75 Amp - Work Pressure: 225 Bar - Cylinder Diameter: 320 mm - Stroke Length: 450 mm - Pump: 103 lt/min - Oil Capacity: 750 lt - Ram Table Advance Speed: 160 mm/sn - Ram Table Return Speed: 250 mm/sn - Mold Dimensions Max: 1600 x 1400 mm - Mold Weight Max: 5000 Kg - Machine Weight: 18000 Kg - Dimensions: 3650 x 3400 x 5000 mm
350 € 
